전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

LM73605-Q1

활성

오토모티브 등급 3.5V~36V, 5A 동기 스텝다운 전압 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM61460-Q1 활성 오토모티브 3V~36V, 6A 저잡음 동기 스텝다운 컨버터 Smaller package, higher performance
LM63460-Q1 활성 향상된 QFN 패키지의 차량용 3V~36V, 6A 저 EMI 동기 스텝다운 컨버터 Smaller solution size, higher efficiency at light load, lower EMI with HotRod™ QFN packaging and spread spectrum.

제품 상세 정보

Rating Automotive Topology Buck Iout (max) (A) 5 Vin (max) (V) 36 Vin (min) (V) 3.5 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, Wettable flanks package Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 15 Duty cycle (max) (%) 96 Type Converter
Rating Automotive Topology Buck Iout (max) (A) 5 Vin (max) (V) 36 Vin (min) (V) 3.5 Vout (max) (V) 34 Vout (min) (V) 1 Features Enable, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, Wettable flanks package Control mode current mode Switching frequency (min) (kHz) 350 Switching frequency (max) (kHz) 2200 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 15 Duty cycle (max) (%) 96 Type Converter
WQFN (RNP) 30 24 mm² 6 x 4
  • AEC-Q100-qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device HBM ESD classification level 2 kV
    • Device CDM ESD classification level C5
  • Wettable flanks QFN package (WQFN)
  • Low EMI and low switching noise
  • Low quiescent current
    • 0.8 µA in shutdown (typical)
    • 15 µA in active mode with no load (typical)
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Pin-selectable auto mode or forced PWM mode
  • Start-up into pre-biased load, fixed or adjustable soft-start time, and tracking
  • Synchronizable to external clock, internal compensation, power-good flag, and precision enable
  • Cycle-by-cycle current limiting, hiccup, UVLO, and thermal shutdown protections
  • Create a custom design with the WEBENCH power designer using LM73605-Q1 or LM73606-Q1
  • AEC-Q100-qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature
    • Device HBM ESD classification level 2 kV
    • Device CDM ESD classification level C5
  • Wettable flanks QFN package (WQFN)
  • Low EMI and low switching noise
  • Low quiescent current
    • 0.8 µA in shutdown (typical)
    • 15 µA in active mode with no load (typical)
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Pin-selectable auto mode or forced PWM mode
  • Start-up into pre-biased load, fixed or adjustable soft-start time, and tracking
  • Synchronizable to external clock, internal compensation, power-good flag, and precision enable
  • Cycle-by-cycle current limiting, hiccup, UVLO, and thermal shutdown protections
  • Create a custom design with the WEBENCH power designer using LM73605-Q1 or LM73606-Q1

The LM73605-Q1/LM73606-Q1family of devices are easy-to-use synchronous step-down DC/DC converters capable of driving up to 5 A (LM73605-Q1)or 6 A (LM73606-Q1) of load current from a supply voltage ranging from 3.5 V to 36 V. The LM73605-Q1/LM73606-Q1 provide exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The family requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lookout, cycle-cy-cycle current limiting, and hiccup short-citcuit protection. The LM73605-Q1 and LM73606-Q1 devices are pin-to-pin compatible for easy current scaling.

The LM73605-Q1/LM73606-Q1family of devices are easy-to-use synchronous step-down DC/DC converters capable of driving up to 5 A (LM73605-Q1)or 6 A (LM73606-Q1) of load current from a supply voltage ranging from 3.5 V to 36 V. The LM73605-Q1/LM73606-Q1 provide exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The family requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lookout, cycle-cy-cycle current limiting, and hiccup short-citcuit protection. The LM73605-Q1 and LM73606-Q1 devices are pin-to-pin compatible for easy current scaling.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
5개 모두 보기
유형 직함 날짜
* Data sheet LM7360x-Q1 3.5-V to 36-V, 5-A or 6-A Synchronous Step-Down Voltage Converter datasheet (Rev. B) PDF | HTML 2021/05/14
Functional safety information LM73605-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2022/07/12
Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 2021/07/26
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Application note Designing High Performance, Low-EMI, Automotive Power Supplies 2017/09/30

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM73605EVM-5V-2MHZ — LM73605 동기 스텝다운 컨버터 평가 모듈

LM73605EVM-5V-2MHZ 평가 모듈(EVM)은 LM73605 동기 스텝다운 전압 컨버터를 평가할 수 있도록 완조립 및 테스트를 거친 회로입니다. EVM은 6V~36V 입력에서 작동하며 5A의 최대 부하 전류로 5V 출력 전압을 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LM73605EVM-5V-400K — LM73605 동기 스텝다운 컨버터 평가 모듈

LM73605EVM-5V-400K EVM(평가 모듈)은 LM73605 동기 스텝다운 전압 컨버터를 평가할 수 있도록 완전히 조립되고 테스트를 거친 회로입니다. 이 EVM은 6V~36V 입력에서 작동하며 5A의 최대 부하 전류로 5V 출력 전압을 제공합니다.

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

LM73605 Inverting and non-inverting PSpice Transient Model

SNVMBD7.ZIP (955 KB) - PSpice Model
시뮬레이션 모델

LM73605 TINA-TI Transient Reference Design

SNVMBE0.TSC (2316 KB) - TINA-TI Reference Design
시뮬레이션 모델

LM73605 TINA-TI Transient Spice Model

SNVMBE1.ZIP (79 KB) - TINA-TI Spice Model
시뮬레이션 모델

LM73605 Unencrypted PSpice Transient Model

SNVJ003.ZIP (9 KB) - Spice Model
시뮬레이션 모델

TINA-TI Enable Hysteresis Schematic

SNVMBL7.ZIP (4 KB) - TINA-TI Reference Design
계산 툴

SNVR524 LM73605 Quickstart Tool

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
LM73605 3.5V~36V, 5A 동기 스텝다운 전압 컨버터 LM73605-Q1 오토모티브 등급 3.5V~36V, 5A 동기 스텝다운 전압 컨버터 LM73606 3.5V~36V, 6A 동기 스텝다운 전압 컨버터 LM73606-Q1 오토모티브 등급 3.5V~36V, 6A 동기 스텝다운 전압 컨버터
거버(Gerber) 파일

DC/DC Converter Enable Hysteresis Calculator

SNVC227.ZIP (40 KB)
레퍼런스 디자인

TIDM-02009 — ASIL D 안전 개념 평가 고속 트랙션, 양방향 DC/DC 변환 레퍼런스 설계

이 레퍼런스 설계는 단일 TMS320F28388D 실시간 C2000™ MCU를 통해 HEV/EV 트랙션 인버터 및 양방향 DC-DC 컨버터를 제어하는 방법을 보여줍니다. 트랙션 컨트롤은 소프트웨어 기반의 리졸버-디지털 컨버터(RDC)를 사용하여 모터를 최대 20,000RPM의 고속으로 구동합니다. DC-DC 컨버터는 위상 전환 풀 브리지(PSFB) 토폴로지 및 동기 정류(SR) 스키마와 함께 PCMC(피크 전류 모드 제어) 기술을 사용합니다. 트랙션 인버터 스테이지는 UCC5870-Q1 스마트 게이트 드라이버로 구동되는 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-050008 — 향상된 전압 감시 기능을 갖춘 ADAS 전원 레퍼런스 설계

이 차량용 전원 레퍼런스 설계는 ADAS(첨단 운전자 보조 시스템)의 안전 MCU를 위한 추가 정밀 전압 감시 및 윈도우 워치독을 지원합니다. 이러한 ADAS 시스템은 자동 긴급 브레이크, 차선 이탈 보조 및 적응형 크루즈 제어와 같은 주행 기능을 제어할 수 있습니다. 고정밀 전압 감지기는 각 레일을 모니터링하여 고객이 기능 안전 목표를 달성할 수 있도록 감시를 개선합니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01492 — 통합 전원 프론트 엔드 및 멀티 페이즈 프로세서 공급 오토모티브 레퍼런스 설계

이 프로세서 공급 장치 레퍼런스 설계는 ADAS(첨단 운전자 보조 시스템)의 고성능 단일 코어 전압 애플리케이션 프로세서에 사용하기 위한 차량용 전원 솔루션입니다. 이 설계는 0.9V에서 최대 10A의 코어 공급 전류를 지원할 수 있습니다. 또한 이 설계는 넓은 입력 전압 범위에서 작동하고 역 배터리 조건을 견딜 수 있으며 방해받지 않는 출력으로 시작-정지 및 3.5V 입력까지 콜드 크랭크를 지원합니다. 이 솔루션의 모든 스위칭 주파수는 2MHz 이상입니다. 이 설계는 다중 위상 구성과 전원 공급 장치의 통합으로 인해 본질적으로 (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
WQFN (RNP) 30 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상