LM62
- Calibrated Linear Scale Factor of +15.6 mV/°C
- Rated for Full 0°C to +90°C Range with 3.0V Supply
- Suitable for Remote Applications
Key Specifications
- Accuracy at 25°C ±2.0 or ±3.0°C (max)
- Temperature Slope +15.6 mV/°C
- Power Supply Voltage Range +2.7V to +10V
- Current Drain @ 25°C 130 μA (max)
- Nonlinearity ±0.8°C (max)
- Output Impedance 4.7 kΩ (max)
All trademarks are the property of their respective owners.
The LM62 is a precision integrated-circuit temperature sensor that can sense a 0°C to +90°C temperature range while operating from a single +3.0V supply. The LM62's output voltage is linearly proportional to Celsius (Centigrade) temperature (+15.6 mV/°C) and has a DC offset of +480 mV. The offset allows reading temperatures down to 0°C without the need for a negative supply. The nominal output voltage of the LM62 ranges from +480 mV to +1884 mV for a 0°C to +90°C temperature range. The LM62 is calibrated to provide accuracies of ±2.0°C at room temperature and +2.5°C/−2.0°C over the full 0°C to +90°C temperature range.
The LM62's linear output, +480 mV offset, and factory calibration simplify external circuitry required in a single supply environment where reading temperatures down to 0°C is required. Because the LM62's quiescent current is less than 130 μA, self-heating is limited to a very low 0.2°C in still air. Shutdown capability for the LM62 is intrinsic because its inherent low power consumption allows it to be powered directly from the output of many logic gates.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM6 2 2.7V, 15.6 mV/C SOT-23 Temperature Sensor datasheet (Rev. E) | 2013. 3. 22 | ||
| 애플리케이션 노트 | Tiny Temperature Sensors for Remote Systems | 2003. 2. 17 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIDA-00128 — 회로 차단기용 저전력, 저잡음 아날로그 프론트 엔드 설계(ACB/MCCB-ETU)
이 레퍼런스 디자인은 MCCB(Molded Case Circuit Breaker) 전자 트립 장치에 사용하기 위한 것입니다. 연산 증폭기 기반 설계는 과전류 접지 고장 릴레이를 위한 전류 모니터링 역할을 합니다. 저렴한 연산 증폭기를 사용하는 이 설계는 픽업(A) 정확도 ±10%와 시간 지연 정확도 0~20%를 제공합니다. 또한 이 설계는 -10~70°C의 주변 온도 내구성과 높은 전자기 내성과 같은 기능을 통해 혹독한 환경 조건을 염두에 두고 있습니다. 마지막으로 이 설계의 아날로그 프론트 엔드는 TI MSP430 MCU와 (...)
TIDA-00130 — 회로 차단기용 제로 드리프트 PGA 기반 아날로그 프론트 엔드 설계(ACB/MCCB-ETU)
이 레퍼런스 디자인은 MCCB(Molded Case Circuit Breaker) 전자 트립 장치에 사용하기 위한 것입니다. 프로그래머블 게인 증폭기 기반 설계는 과전류 접지 고장 릴레이를 위한 전류 모니터링 역할을 합니다. 제로 드리프트 프로그래머블 증폭기를 사용하는 이 설계는 0~20%의 ±10% 픽업(A) 정확도와 시간 지연 정확도를 제공합니다. 또한 이 솔루션은 -10~70⁰C의 주변 온도 내구성과 높은 전자기 내성과 같은 기능을 포함하여 혹독한 환경 조건을 처리할 수 있도록 설계되었습니다. 마지막으로 이 설계의 (...)
TIDA-00191 — 확장된 전류 범위를 지원하는 모터 전기 과부하 릴레이용 아날로그 프론트 엔드
This reference design is the analog front end (AFE) for an electronic overload relay, used for monitoring and protecting motors from overcurrent or undercurrent events. It is an ideal tool for developers creating overload relays for sensitive AC motors in industrial applications. This programmable (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBZ) | 3 | Ultra Librarian |