전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

LM5574-Q1

활성

75V, 0.5A 스텝다운 스위칭 레귤레이터

제품 상세 정보

Rating Automotive Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 75 Vin (min) (V) 6 Vout (max) (V) 70 Vout (min) (V) 1.23 Features Enable, Frequency synchronization, Over Current Protection, Soft Start Adjustable, Tracking Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
Rating Automotive Topology Buck Iout (max) (A) 0.5 Vin (max) (V) 75 Vin (min) (V) 6 Vout (max) (V) 70 Vout (min) (V) 1.23 Features Enable, Frequency synchronization, Over Current Protection, Soft Start Adjustable, Tracking Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.001 Duty cycle (max) (%) 95
TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm)
  • LM5574-Q1 is an automotive grade product that is AEC-Q100 grade qualified
  • –40°C to + 150°C operating junction temperature
  • Integrated 75V, 750mΩ N-Channel MOSFET
  • Ultra-wide input voltage range from 6V to 75V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 500kHz with single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • Package:
    • TSSOP-16
  • Create a custom design using the LM5574-Q1 with the WEBENCH Power Designer
  • LM5574-Q1 is an automotive grade product that is AEC-Q100 grade qualified
  • –40°C to + 150°C operating junction temperature
  • Integrated 75V, 750mΩ N-Channel MOSFET
  • Ultra-wide input voltage range from 6V to 75V
  • Adjustable output voltage as low as 1.225V
  • 1.5% feedback reference accuracy
  • Operating frequency adjustable between 50kHz and 500kHz with single resistor
  • Controller or peripheral frequency synchronization
  • Adjustable soft start
  • Emulated current mode control architecture
  • Wide bandwidth error amplifier
  • Built-in protection
  • Package:
    • TSSOP-16
  • Create a custom design using the LM5574-Q1 with the WEBENCH Power Designer

The LM5574-Q1 is an easy-to-use, buck regulator that allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 75V, the LM5574-Q1 delivers 0.5A of continuous output current with an integrated 750mΩ N-Channel MOSFET. The regulator uses an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease-of-loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 500kHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM5574-Q1 makes sure of robustness with cycle-by-cycle current limit, short-circuit protection, thermal shutdown, and remote shutdown. The device is available in a 16-pin TSSOP package. The LM5574-Q1 is supported by the full suite of WEBENCH online design tools.

The LM5574-Q1 is an easy-to-use, buck regulator that allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6V to 75V, the LM5574-Q1 delivers 0.5A of continuous output current with an integrated 750mΩ N-Channel MOSFET. The regulator uses an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease-of-loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 500kHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple ICs from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM5574-Q1 makes sure of robustness with cycle-by-cycle current limit, short-circuit protection, thermal shutdown, and remote shutdown. The device is available in a 16-pin TSSOP package. The LM5574-Q1 is supported by the full suite of WEBENCH online design tools.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LMR38010-Q1 활성 차량용 SIMPLE SWITCHER ® 4.2V~80V, 1A 동기식 벅 컨버터 Smaller footprint, lower EMI, lower IQ, higher efficiency and spread spectrum.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
20개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LM5574-Q1 75V, 0.5A, Automotive, Step-Down Switching Regulator datasheet (Rev. D) PDF | HTML 2025. 4. 25
애플리케이션 노트 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024. 3. 25
백서 Overcoming Challenges in Designing Step-Dwn Reg Apps w/40V Input Voltage (Rev. A) 2018. 7. 3
애플리케이션 노트 Cost-Effective Transformerless Offline Supply for Light Load Applications (Rev. A) 2015. 6. 16
애플리케이션 노트 Cap Drop Offline Supply for E-Meters 2015. 6. 16
애플리케이션 노트 Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A) 2014. 9. 12
애플리케이션 노트 AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A) 2013. 5. 6
애플리케이션 노트 AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013. 4. 24
애플리케이션 노트 AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013. 4. 23
애플리케이션 노트 AN-1197 Selecting Inductors for Buck Converters (Rev. B) 2013. 4. 23
애플리케이션 노트 AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C) 2013. 4. 23
애플리케이션 노트 AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013. 4. 23
애플리케이션 노트 Understanding and Applying Current-Mode Control Theory 2007. 8. 19
애플리케이션 노트 Input and Output Capacitor Selection 2005. 9. 19
추가 자료 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005. 7. 12
애플리케이션 노트 AN-643 EMI/RFI Board Design (Rev. B) 2004. 5. 3

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM5574EVAL — 75V, 0.5A 스텝다운 스위칭 레귤레이터 평가 모듈

The LM5574 evaluation board is designed to provide the design engineer with a fully functional power converter based on Emulated Current Mode Control to evaluate the LM5574 regulator IC. The evaluation board provides a 5V output with a 0.5A current capability. The ultra-wide input voltage ranges (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

LM5574 Non-Inverting and Inverting PSpice Transient Model (Rev. A)

SNVM310A.ZIP (115 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5574 PSpice Average Model

SNVM311.ZIP (58 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5574 Unencrypted PSpice Average Model

SNVM933.ZIP (2 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5574 Unencrypted PSpice Transient Model (Rev. A)

SNVM934A.ZIP (4 KB) - PSpice 모델
지원되는 제품 및 하드웨어
계산 툴

LM2557X-557XQUICK-CALC — LM(2)557x 빠른 시작 SIMPLE SWITCHER 구성 요소 계산기

지원되는 제품 및 하드웨어
계산 툴

SIMPLESWITCHER-COMPONENT-CALC — 다운로드 가능한 LM(2)557x 빠른 시작 SIMPLE SWITCHER 구성 요소 계산기

지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
TSSOP (PW) 16 Ultra Librarian

주문 및 품질

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

비디오 시리즈

모든 비디오 보기

동영상