전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

LM53635-Q1

활성

3.5A, 36V 동기식, 2.1MHz, 오토모티브 스텝다운 DC-DC 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM63635-Q1 활성 확산 스펙트럼을 지원하는 차량용 3.5V~36V, 3.25A 스텝다운 전압 컨버터 Available in wettable flank WSON package
LMQ62440-Q1 활성 오토모티브 3V~36V, 4A 저잡음 고정 주파수 동기 스텝다운 컨버터 Smaller footprint, lower EMI with dual-random spread spectrum and lower IQ.

제품 상세 정보

Rating Automotive Topology Buck Iout (max) (A) 3.5 Vin (max) (V) 42 Vin (min) (V) 3.5 Vout (max) (V) 10 Vout (min) (V) 3.2 Features Enable, Fixed Output, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 1850 Switching frequency (max) (kHz) 2350 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 18 Duty cycle (max) (%) 98 Type Converter
Rating Automotive Topology Buck Iout (max) (A) 3.5 Vin (max) (V) 42 Vin (min) (V) 3.5 Vout (max) (V) 10 Vout (min) (V) 3.2 Features Enable, Fixed Output, Forced PWM, Frequency synchronization, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, Wettable flanks package EMI features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Switching frequency (min) (kHz) 1850 Switching frequency (max) (kHz) 2350 Operating temperature range (°C) -40 to 150 Iq (typ) (µA) 18 Duty cycle (max) (%) 98 Type Converter
VQFN-HR (RNL) 22 20 mm² 5 x 4
  • AEC-Q100 automotive qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM classification level 2
    • Device CDM classification level C6
  • –40°C to +150°C junction temperature range
  • 15-µA quiescent urrent at no load (typical) with 3.3-V output
  • 5.0-mm × 4.0-mm VQFN package with or without wettable flanks and 0.6-mm VIN spacing
  • Low EMI and switch noise
  • Spread spectrum option
  • External frequency synchronization
  • RESET output with internal filter and 3-ms release timer
  • Pin-selectable forced PWM mode
  • Built-in compensation, soft start, current limit, thermal shutdown, and UVLO
  • 0.6-V dropout at 3.5 A at 105°C TA
  • ±1% output voltage tolerance (–40°C to 125°C TJ)
  • Available with fixed 5-V, 3.3-V or adjustable output
  • AEC-Q100 automotive qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM classification level 2
    • Device CDM classification level C6
  • –40°C to +150°C junction temperature range
  • 15-µA quiescent urrent at no load (typical) with 3.3-V output
  • 5.0-mm × 4.0-mm VQFN package with or without wettable flanks and 0.6-mm VIN spacing
  • Low EMI and switch noise
  • Spread spectrum option
  • External frequency synchronization
  • RESET output with internal filter and 3-ms release timer
  • Pin-selectable forced PWM mode
  • Built-in compensation, soft start, current limit, thermal shutdown, and UVLO
  • 0.6-V dropout at 3.5 A at 105°C TA
  • ±1% output voltage tolerance (–40°C to 125°C TJ)
  • Available with fixed 5-V, 3.3-V or adjustable output

The LM53625-Q1/LM53635-Q1 synchronous buck regulator is optimized for automotive applications, providing an output voltage of 5 V, 3.3 V, or an adjustable output. Advanced high-speed circuitry allows the LM53625-Q1/LM53635-Q1 to regulate from an input of 18 V to an output of 3.3 V at a fixed frequency of 2.1 MHz. Innovative architecture allows this device to regulate a 3.3-V output from an input voltage of only 3.55 V. All aspects of the LM53625-Q1/LM53635-Q1 are optimized for automotive and performance-driven industrial customers. An input voltage range up to 36 V, with transient tolerance up to 42 V, eases input surge protection design. The automotive-qualified Hotrod QFN package with wettable flanks reduces parasitic inductance and resistance while increasing efficiency, minimizing switch node ringing, and dramatically lowering electromagnetic interference (EMI). An open-drain reset output, with built-in filtering and delay, provides a true indication of system status. This feature negates the requirement for an additional supervisory component, saving cost and board space. Seamless transition between PWM and PFM modes and low quiescent current (only 15 µA for the 3.3 V option) ensure high efficiency and superior transient responses at all loads.

The LM53625-Q1/LM53635-Q1 synchronous buck regulator is optimized for automotive applications, providing an output voltage of 5 V, 3.3 V, or an adjustable output. Advanced high-speed circuitry allows the LM53625-Q1/LM53635-Q1 to regulate from an input of 18 V to an output of 3.3 V at a fixed frequency of 2.1 MHz. Innovative architecture allows this device to regulate a 3.3-V output from an input voltage of only 3.55 V. All aspects of the LM53625-Q1/LM53635-Q1 are optimized for automotive and performance-driven industrial customers. An input voltage range up to 36 V, with transient tolerance up to 42 V, eases input surge protection design. The automotive-qualified Hotrod QFN package with wettable flanks reduces parasitic inductance and resistance while increasing efficiency, minimizing switch node ringing, and dramatically lowering electromagnetic interference (EMI). An open-drain reset output, with built-in filtering and delay, provides a true indication of system status. This feature negates the requirement for an additional supervisory component, saving cost and board space. Seamless transition between PWM and PFM modes and low quiescent current (only 15 µA for the 3.3 V option) ensure high efficiency and superior transient responses at all loads.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
13개 모두 보기
유형 직함 날짜
* Data sheet LM53625/35-Q1, 2.5-A or 3.5-A, 36-V Synchronous, 2.1-MHz, Step-Down DC-DC Converter datasheet (Rev. B) PDF | HTML 2021/07/29
Selection guide Automotive Infotainment EE Buck Converter/Controller Selection Guide (Rev. B) 2021/04/15
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
White paper 전원 공급 장치의 EMI 절감을 위한 시간 및 비용 효율적 혁신 2020/12/04
Technical article Optimizing flip-chip IC thermal performance in automotive designs PDF | HTML 2019/12/11
Technical article How a DC/DC converter package and pinout design can enhance automotive EMI perform PDF | HTML 2018/09/04
Technical article A review of EMI standards, part 2 – radiated emissions PDF | HTML 2018/07/05
Technical article Effects of IC package on EMI performance PDF | HTML 2018/05/22
Application note Designing High Performance, Low-EMI, Automotive Power Supplies 2017/09/30
Technical article Discrete SBCs: versatile and scalable solutions for any application PDF | HTML 2017/07/27
Technical article Build a sub-20W CISPR25 Class 5 power design for automotive infotainment processor PDF | HTML 2017/05/02
Design guide Automotive Battery to Point-of-Load Power Solution for TDA2xx Design Guide (Rev. B) 2017/01/31
Technical article What to consider when designing an automotive power supply PDF | HTML 2016/06/27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM53635AQEVM — LM53635A-Q1 3.5A 5.0V 조정 가능 출력 넓은 Vin 동기 2.1MHz 오토모티브 스텝다운 컨버터

이 EVM은 LM53635A 차량용 통합 벅 컨버터의 기능을 보여줍니다. 이 EVM은 뒷면에 잡음 감소를 지원하주는 EMI 필터가 있습니다. VIN1/GND1 포스트를 사용하면 이 EMI 필터를 바이패스할 수 있습니다. EVM은 입력 전압 3.5V~36V에서 작동(과도 전압 최대 42V까지)하며 연속 부하 3.5A에서 조정 가능한 5.0V 출력을 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LM53635LQEVM — LM53635L-Q1 3.5A 5.0V 고정 출력 넓은 Vin 동기 2.1MHz 오토모티브 스텝다운 컨버터 EVM

이 EVM은 LM53635L 차량용 통합 벅 컨버터의 기능을 보여줍니다. EVM은 뒷면에 잡음 감소 및 확산 스펙트럼 구축을 지원하는 EMI 필터가 있습니다. 사용자는 VIN1/GND1 포스트를 사용하여 해당 EMI 필터를 바이패스하도록 선택할 수 있습니다. EVM은 입력 전압 3.5V~36V에서 작동(과도 전압 최대 42V까지)하며 연속 부하 3.5A에서 고정 출력 5.0V를 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LM53635MQEVM — 확산 스펙트럼을 지원하는 LM53635M-Q1 3.5A 5.0V 조정 가능 출력 2.1MHz 오토모티브 스텝다운 컨버터

이 EVM은 LM53635M 차량용 통합 벅 컨버터의 기능을 보여줍니다. EVM은 뒷면에 잡음 감소 및 확산 스펙트럼 구축을 지원하는 EMI 필터가 있습니다. 사용자는 VIN1/GND1 포스트를 사용하여 해당 EMI 필터를 바이패스하도록 선택할 수 있습니다. EVM은 입력 전압 3.5V~36V에서 작동(과도 전압 최대 42V까지)하며 연속 부하 3.5A에서 조정 가능한 5.0V 출력을 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

LM53635NQEVM — LM53635N-Q1 3.5A 3.3V 고정 출력 넓은 Vin 동기 2.1MHz 오토모티브 스텝다운 컨버터 EVM

이 EVM은 LM53635N 차량용 통합 벅 컨버터의 기능을 보여줍니다. EVM은 뒷면에 잡음 감소 및 확산 스펙트럼 구축을 지원하는 EMI 필터가 있습니다. 사용자는 VIN1/GND1 포스트를 사용하여 해당 EMI 필터를 바이패스하도록 선택할 수 있습니다. EVM은 입력 전압 3.5V~36V에서 작동(과도 전압 최대 42V까지)하며 연속 부하 3.5A에서 고정 출력 3.3V를 제공합니다.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

MMWAVEICBOOST — mmWave 센서 캐리어 카드 플랫폼

MMWAVEICBOOST 캐리어 카드는 일부 60GHz mmWave 평가 모듈의 기능을 확장합니다. 이 보드는 TI의 Code Composer 호환 디버거를 통해 추적 및 단일 스텝과 같은 고급 소프트웨어 개발, 디버그 기능을 제공합니다. 온보드 LaunchPad 인터페이스를 이용하면 추가 센서 및 무선 연결을 위해 TI의 BoosterPack™ 호환 하드웨어와 페어링할 수 있습니다. TI의 LaunchPad 에코시스템은 더 넓은 주변 기기 세트와 연결에 대한 MMWAVEICBOOST 액세스를 지원합니다.

(...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

LM536353-Q1 PSpice Transient Model

SNVMAN4.ZIP (116 KB) - PSpice Model
시뮬레이션 모델

LM536353-Q1 Unencrypted PSpice Transient Model

SNVMAN3.ZIP (8 KB) - PSpice Model
시뮬레이션 모델

LM536355-Q1 PSpice Transient Model

SNVMAN2.ZIP (118 KB) - PSpice Model
시뮬레이션 모델

LM536355-Q1 Unencrypted PSpice Transient Model

SNVMAN1.ZIP (8 KB) - PSpice Model
시뮬레이션 모델

LM53635A-Q1 PSpice Transient Model

SNVMAO0.ZIP (119 KB) - PSpice Model
시뮬레이션 모델

LM53635A-Q1 Unencrypted PSpice Transient Model

SNVMAN9.ZIP (8 KB) - PSpice Model

많은 TI 레퍼런스 설계에는 LM53635-Q1이(가) 포함됩니다.

레퍼런스 디자인 선택 툴을 사용하여 애플리케이션 및 매개 변수에 가장 적합한 설계를 검토하고 식별할 수 있습니다.

패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RNL) 22 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상