전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨버터

LM5165-Q1

활성

초저 IQ를 지원하는 오토모티브 3V ~ 65V, 150mA 동기 벅 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
LMR36503-Q1 활성 크기 및 저부하 효율성에 최적화된 오토모티브 3V~65V, 0.3A 벅 컨버터 Smaller footprint, lower IQ and lower EMI.

제품 상세 정보

Rating Automotive Topology Buck Iout (max) (A) 0.15 Vin (max) (V) 65 Vin (min) (V) 3 Vout (max) (V) 65 Vout (min) (V) 1.23 Features Adjustable current limit, Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00001 Duty cycle (max) (%) 100
Rating Automotive Topology Buck Iout (max) (A) 0.15 Vin (max) (V) 65 Vin (min) (V) 3 Vout (max) (V) 65 Vout (min) (V) 1.23 Features Adjustable current limit, Enable, Light Load Efficiency, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, UVLO adjustable Control mode Constant on-time (COT) Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00001 Duty cycle (max) (%) 100
VSSOP (DGS) 10 14.7 mm² (3 mm × 4.9 mm) VSON (DRC) 10 9 mm² (3 mm × 3 mm)
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C5
  • Wide input voltage range of 3 V to 65 V
  • 10.5-µA no-load quiescent current
  • –40°C to 150°C junction temperature range
  • Fixed (3.3 V and 5 V) or adjustable output voltages
  • Meets EN55022 / CISPR 22 EMI standards
  • Integrated 2-Ω PMOS buck switch
    • Supports 100% duty cycle for low dropout
  • Integrated 1-Ω NMOS synchronous rectifier
    • Eliminates external rectifier diode
  • Programmable current limit setpoint (four levels)
  • Selectable PFM or COT mode operation
  • 1.223-V ±1% internal voltage reference
  • 900-µs internal or programmable soft start
  • Active slew rate control for low EMI
  • Monotonic start-up into prebiased output
  • No loop compensation or bootstrap components
  • Precision enable and input UVLO with hysteresis
  • Thermal shutdown protection with hysteresis
  • 10-pin VSON and VSSOP packages
  • Use TPSM265R1 module for faster time to market
  • Create a custom regulator design using WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to 125°C ambient temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C5
  • Wide input voltage range of 3 V to 65 V
  • 10.5-µA no-load quiescent current
  • –40°C to 150°C junction temperature range
  • Fixed (3.3 V and 5 V) or adjustable output voltages
  • Meets EN55022 / CISPR 22 EMI standards
  • Integrated 2-Ω PMOS buck switch
    • Supports 100% duty cycle for low dropout
  • Integrated 1-Ω NMOS synchronous rectifier
    • Eliminates external rectifier diode
  • Programmable current limit setpoint (four levels)
  • Selectable PFM or COT mode operation
  • 1.223-V ±1% internal voltage reference
  • 900-µs internal or programmable soft start
  • Active slew rate control for low EMI
  • Monotonic start-up into prebiased output
  • No loop compensation or bootstrap components
  • Precision enable and input UVLO with hysteresis
  • Thermal shutdown protection with hysteresis
  • 10-pin VSON and VSSOP packages
  • Use TPSM265R1 module for faster time to market
  • Create a custom regulator design using WEBENCH Power Designer

The LM5165-Q1 device is a compact, easy-to-use, 3-V to 65-V, ultra-low IQ synchronous buck converter with high efficiency over wide input voltage and load current ranges. With integrated high-side and low-side power MOSFETs, up to 150-mA of output current can be delivered at fixed output voltages of 3.3 V or 5 V or at an adjustable output. The converter is designed to simplify implementation while providing options to optimize the performance for the target application. Pulse Frequency Modulation (PFM) mode is selected for optimal light-load efficiency or Constant On-Time (COT) control for nearly constant operating frequency. Both control schemes do not require loop compensation while providing excellent line and load transient response and short PWM on-time for large step-down conversion ratios.

The high-side P-channel MOSFET can operate at 100% duty cycle for lowest dropout voltage and does not require a bootstrap capacitor for gate drive. Also, the current limit setpoint is adjustable to optimize inductor selection for a particular output current requirement. Selectable and adjustable start-up timing options include minimum delay (no soft start), internally fixed (900 µs), and externally programmable soft start using a capacitor. An open-drain PGOOD indicator can be used for sequencing, fault reporting, and output voltage monitoring. The LM5165-Q1 is qualified to automotive AEC-Q100 grade 1 and is available in 10-pin VSON and VSSOP packages with 0.5-mm pin pitch.

The LM5165-Q1 device is a compact, easy-to-use, 3-V to 65-V, ultra-low IQ synchronous buck converter with high efficiency over wide input voltage and load current ranges. With integrated high-side and low-side power MOSFETs, up to 150-mA of output current can be delivered at fixed output voltages of 3.3 V or 5 V or at an adjustable output. The converter is designed to simplify implementation while providing options to optimize the performance for the target application. Pulse Frequency Modulation (PFM) mode is selected for optimal light-load efficiency or Constant On-Time (COT) control for nearly constant operating frequency. Both control schemes do not require loop compensation while providing excellent line and load transient response and short PWM on-time for large step-down conversion ratios.

The high-side P-channel MOSFET can operate at 100% duty cycle for lowest dropout voltage and does not require a bootstrap capacitor for gate drive. Also, the current limit setpoint is adjustable to optimize inductor selection for a particular output current requirement. Selectable and adjustable start-up timing options include minimum delay (no soft start), internally fixed (900 µs), and externally programmable soft start using a capacitor. An open-drain PGOOD indicator can be used for sequencing, fault reporting, and output voltage monitoring. The LM5165-Q1 is qualified to automotive AEC-Q100 grade 1 and is available in 10-pin VSON and VSSOP packages with 0.5-mm pin pitch.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
11개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LM5165-Q1 Automotive 3-V to 65-V Input, 150-mA Synchronous Buck Converter With Ultra-Low IQ datasheet (Rev. C) PDF | HTML 2022. 12. 16
백서 Valuing wide VIN, low EMI synchronous buck circuits for cost-driven, demanding a (Rev. A) 2019. 4. 10
애플리케이션 노트 Stability Analysis and Design of COT Type-3 Ripple Circuit 2019. 3. 20
Application brief Powering Drones With a Wide VIN DC-DC Converter (Rev. A) 2019. 2. 5
기술 문서 HEV/EV battery management systems explained simply PDF | HTML 2018. 5. 7
아날로그 디자인 학술지 Low-EMI buck powers a multivariable sensor transmitter with BLE connectivity 2016. 10. 24
기술 문서 Powering smart sensor transmitters in industrial applications PDF | HTML 2016. 5. 2
아날로그 디자인 학술지 Low-IQ synchronous buck converter enables intelligent field-sensor applications 2016. 4. 26
기술 문서 DC/DC converter datasheets - Quiescent current demystified: Part two PDF | HTML 2016. 4. 11
아날로그 디자인 학술지 Accurately measuring efficiency of ultralow-IQ devices 2014. 1. 22
애플리케이션 노트 AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013. 4. 24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

LM5165EVM-HD-C50X — LM5165 저 Iq 동기 벅 컨버터 고밀도 COT 평가 모듈

LM5165EVM-HD-C50X 고밀도 평가 모듈(EVM)은 초저 IQ를 갖춘 LM5165 고성능, 초소형 동기 벅 DC/DC 벅 컨버터의 성능을 보여주기 위해 설계되었습니다. 모듈 스타일 설계로 부품 수가 적어 소형 풋프린트에 패키징됩니다. 3V~65V의 넓은 입력 전압 범위에서 작동하여 2% 이상의 설정값 정확도로 고정 5V 출력을 제공합니다. 고압측 MOSFET의 100% 듀티 사이클 전도를 통해 입력 전압이 출력 전압 설정값 이하로 낮아질 때마다 저손실 성능을 발휘합니다. LM5165의 (...)
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 보드

LM5165EVM-HD-P50A — LM5165 저 Iq 동기 벅 컨버터 고밀도 PFM 평가 모듈

LM5165EVM-HD-P50A 고밀도 평가 모듈(EVM)은 초저 IQ를 갖춘 LM5165 고성능, 초소형 동기 벅 DC/DC 벅 컨버터의 성능을 보여주기 위해 설계되었습니다. 모듈 스타일 설계로 부품 수가 적어 소형 풋프린트에 패키징됩니다. 3V~65V의 넓은 입력 전압 범위에서 작동하여 2% 이상의 설정값 정확도로 고정 5V 출력을 제공합니다. 고압측 MOSFET의 100% 듀티 사이클 전도를 통해 입력 전압이 출력 전압 설정값 이하로 낮아질 때마다 저손실 성능을 발휘합니다. LM5165의 펄스 주파수 변조(PFM) 제어 (...)

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

LM5165 PSpice Transient Model (Rev. B)

SNVMAH3B.ZIP (133 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5165 Unencrypted PSpice Transient Model (Rev. B)

SNVMAK5B.ZIP (4 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5165X PSpice Transient Model (Rev. A)

SNVMAJ5A.ZIP (95 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5165X Unencrypted PSpice Transient Model (Rev. A)

SNVMAK3A.ZIP (4 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5165Y PSpice Transient Model (Rev. A)

SNVMAJ6A.ZIP (90 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM5165Y Unencrypted PSpice Transient Model (Rev. A)

SNVMAK4A.ZIP (4 KB) - PSpice 모델
지원되는 제품 및 하드웨어
계산 툴

LM5165DESIGN-CALC — LM5165 DC/DC 컨버터 설계 툴

LM5165 빠른 시작 설계 툴에 오신 것을 환영합니다. 이 독립형 툴은 LM5165 저 IQ 동기식 벅 DC/DC 레귤레이터에 기반한 DC/DC 벅 컨버터 설계를 통해 전원 공급 장치 엔지니어를 용이하게 하고 지원합니다. 따라서 사용자는 애플리케이션 요구 사항을 충족하기 위해 최적화된 설계에 신속하게 도착할 수 있습니다.
지원되는 제품 및 하드웨어
레퍼런스 디자인

PMP22270 — 조정 가능한 출력 전압, 200W SEPIC 전원 공급 장치 레퍼런스 설계

이 200W SEPIC 컨버터 레퍼런스 설계는 최대 출력 전류가 4A인 비절연 조정 가능한 5V~200V 출력 전압을 공급합니다. 출력 전압은 0%~100% 듀티 사이클, PWM(펄스 폭 변조) 입력을 사용하여 설정됩니다.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
VSSOP (DGS) 10 Ultra Librarian
VSON (DRC) 10 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

비디오 시리즈

모든 비디오 보기

동영상