데이터 시트
LM51521-Q1
- AEC-Q100 qualified for automotive
applications
- Temperature grade 1: –40°C to +125°C, TA
- Functional Safety-Capable
- Suited for wide operating range automotive battery
powered applications
- 3.8-V to 42-V input operating range
- Dynamically programmable VOUT from 5 V to 20 V (protection up to 57 V)
- Minimum boost input 0.8 V when BIAS ≥ 3.8 V
- Bypass operation when VSUPPLY > VLOAD (LM5152 only, see the device comparison table)
- Minimized battery drain
- Shutdown current ≤ 3 µA
- Automatic mode transition
- Battery drain in deep sleep ≤ 11 µA (bypass operation, charge pump off)
- Battery drain in deep sleep ≤ 33 µA (bypass operation, charge pump on)
- BIAS IQ in sleep ≤ 13 µA (skip mode)
- Strong 5-V MOSFET drivers
- Small solution size and low cost
- 2.2-MHz maximum switching frequency
- Internal boot diode
- Constant peak current limit over VIN
- Supports DCR inductor current sensing
- QFN-20 with wettable flanks
- Avoid AM band interference and crosstalk
- Optional clock synchronization
- 100-kHz to 2.2-MHz switching frequency
- Selectable switching mode (FPWM, diode emulation, skip mode)
- EMI mitigation
- Optional programmable spread spectrum
- Lead-less package
- Programmability and flexibility
- Dynamic VOUT tracking
- Dynamic switching frequency programming
- Programmable line UVLO
- Adjustable soft start
- Adaptive dead time
- Boost STATUS indicator
- Integrated protection features
- Cycle-by-cycle peak current limit
- Overvoltage protection
- HB-SW short protection
- Thermal shutdown
The LM5152x-Q1 (LM5152-Q1 and LM51521-Q1) device is a wide input range synchronous boost controller that employs peak current mode control.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5152x-Q1 Automotive Low-IQ Synchronous Boost Controller for Start-Stop/Backup Battery Power Supply datasheet (Rev. A) | PDF | HTML | 2022. 4. 14 | |
| 기능 안전 정보 | LM5152x-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2022. 3. 30 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
LM5152EVM-BST — 부스트 컨트롤러용 LM5152 평가 모듈
LM5152EVM-BST 평가 모듈(EVM)은 LM5152-Q1의 넓은 입력 전압 동기식 부스트 컨트롤러의 기능과 성능을 다음과 같이 보여줍니다.
- 저 IQ 작동
- 내부 피드백 저항기
- VIN이 VOUT 조정 타깃보다 큰 경우 바이패스 모드 작동
- 동적 출력 전압 트래킹
- 상태 표시등
- 프로그래머블 주파수
- 클록 디더링
- 프로그래머블 UVLO.
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
계산 툴
SLVRBL6 — LM51521-Q1 Boost Controller Quickstart Design Tool
레퍼런스 디자인
PMP31011 — 24W, 낮은 입력 전압 동기식 부스트 컨버터 레퍼런스 설계
이 레퍼런스 설계는 LM51521-Q1 부스트 컨트롤러를 사용하여 8V, 3A 부하를 공급하며 입력에 있는 단일 셀 슈퍼 커패시터로 작동하도록 최적화되었습니다. 컨버터는 최대 1.0V의 슈퍼 커패시터를 방전하여 가능한 한 많은 저장 에너지를 활용하여 KL30 자동차 배터리 전압이 존재하지 않는 응급 상황에서 자동차 문을 열 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGR) | 20 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.