LM5145-Q1
- AEC-Q100 qualified
for automotive applications:
- Device temperature grade 1: –40°C to +125°C ambient temperature range
- Functional Safety-Capable
- Versatile synchronous buck DC/DC controller
- Wide input voltage range of 5.5 V to 75 V
- 150°C maximum junction temperature
- 0.8-V reference with ±1% feedback accuracy
- Adjustable output voltage from 0.8 V to 60 V
- 40-ns tON(min) for high VIN / VOUT ratio
- 140-ns tOFF(min) for low dropout
- Lossless RDS(on) or shunt current sensing
- Optimized for CISPR 25 Class 5 requirements
- Switching frequency from 100 kHz to 1 MHz
- SYNC in and SYNC out capability
- Selectable diode emulation or FPWM
- 7.5-V gate drivers for standard VTH
MOSFETs
- 14-ns adaptive dead-time control
- 2.3-A source and 3.5-A sink capability
- Inherent protection features for robust design
- Adjustable output voltage soft start
- Hiccup-mode overcurrent protection
- Input UVLO with hysteresis
- VCC and gate-drive UVLO protection
- Precision enable input and open-drain PGOOD indicator for sequencing and control
- Thermal shutdown protection with hysteresis
- 20-pin VQFN package with wettable flanks
- Create a custom design using the LM5145-Q1 with WEBENCH Power Designer
The LM5145-Q1 75-V synchronous buck controller regulates from a high input voltage source or from an input rail subject to high-voltage transients, minimizing the need for external surge suppression components. A high-side switch minimum on-time of 40 ns gives large step-down ratios, enabling the direct step-down conversion from a 48-V nominal input to low-voltage rails for reduced system complexity and solution cost. The LM5145-Q1 continues to operate during input voltage dips as low as 5.5 V, at nearly 100% duty cycle if needed, making it an excellent choice for high-power automotive DC/DC regulators, automotive motor drives, and HEV/EV power compliant to LV-148.
Forced-PWM (FPWM) operation eliminates switching frequency variation to minimize EMI, while user-selectable diode emulation lowers current consumption at light-load conditions. The adjustable switching frequency as high as 1 MHz can be synchronized to an external clock source to eliminate beat frequencies in noise-sensitive applications.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | LM5145-Q1 Automotive 75-V Synchronous Buck DC/DC Controller With Wide Duty Cycle Range datasheet (Rev. A) | PDF | HTML | 2021. 6. 8 | |
| 애플리케이션 노트 | Controller to Converter – Design Considerations for 24V and 48V Systems | PDF | HTML | 2024. 10. 2 | ||
| 기능 안전 정보 | LM5145-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2021. 6. 23 | ||
| e북 | An Engineer’s Guide to Low EMI in DC/DC Regulators | 2021. 4. 21 | |||
| 백서 | An overview of radiated EMI specifications for power supplies | 2018. 6. 5 | |||
| 백서 | An overview of conducted EMI specifications for power supplies | 2018. 2. 1 | |||
| Application brief | Improve DC/DC Regulator EMI for Free with Optimized Power Stage Layout | 2017. 11. 13 | |||
| 애플리케이션 노트 | Creating a Dual USB Universal Car Charger From the TPS40170 and Two TPS2511 | 2012. 5. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5145EVM-HD-20A — LM5145 넓은 VIN 동기 벅 컨트롤러 고밀도 평가 모듈
LM5146-Q1-EVM12V — 동기 벅 컨트롤러 평가 모듈
LM5146-Q1-EVM12V 고밀도 평가 모듈(EVM)은 넓은 입력 전압 범위를 지닌 LM5146-Q1 고성능 동기 벅 DC-DC 컨트롤러의 성능을 보여주도록 설계되었습니다. 이 설계는 부품 수가 적은 미니어처 풋프린트로 패키징되었습니다. 이는 15V~85V의 넓은 입력 전압 범위에서 작동하여 1% 이상의 설정값 정확도를 지닌 고정 12V 출력 및 최대 8A의 전류를 공급합니다. LM5146-Q1의 최소 온 타임이 40ns이므로 매우 낮은 듀티 사이클로 작동할 수 있습니다. LM5146-Q1은 오류 상태 시 레귤레이터를 보호하기 (...)
LM5145DESIGN-CALC — LM5145 빠른 시작 계산기 툴
LM5145 빠른 시작 설계 툴에 오신 것을 환영합니다. 이 독립형 툴은 LM5145 75V 동기식 벅 컨트롤러에 기반한 DC/DC 벅 레귤레이터 설계를 통해 전원 공급 장치 엔지니어를 원활하게 지원합니다. 따라서 사용자는 애플리케이션 요구 사항을 충족하기 위해 최적화된 설계에 신속하게 도착할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGY) | 20 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.