LM5141
- –40ºC to +125ºC Ambient Operating Temperature Range
- An AEC-Q100 Qualified Device is Available
- VIN 3.8 V to 65 V (70 V Absolute Maximum)
- Output: Fixed 3.3 V, 5 V, or Adjustable From
1.5 V - 15 V with ±0.8% Accuracy - Fixed 2.2 MHz or 440 kHz Switching Frequency with ±5% Accuracy
- High-Side and Low-Side Gate Drive With Slew Rate Control
- Optional Frequency Shift by Varying an Analog Voltage or RT Resistor
- Optional Synchronization to an External Clock
- Optional Spread Spectrum
- Shutdown Mode IQ: 10 µA Typical
- Low Standby Mode IQ: 35 µA Typical
- 75 mV Current Limit Threshold with ±0.9% Accuracy
- External Resistor or DCR Current Sensing
- Output Enable Logic Input
- Hiccup Mode for Sustained Overload
- Power Good Indication Output
- Selectable Diode Emulation or Forced Pulse Width Modulation
- QFN-24 Package with Wettable Flanks
- Create a Custom Design Using the LM5141 With the WEBENCH® Power Designer
The LM5141 is a synchronous buck controller, intended for high voltage wide VIN step-down converter applications. The control method is peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting, and ease of loop compensation. The LM5141 features slew rate control to simplify the compliance with EMI requirements.
The LM5141 has two selectable switching frequencies: 2.2 MHz and 440 kHz. Gate Drivers with Slew Rate Control that can be adjusted to reduce EMI.
In light or no-load conditions, the LM5141 operates in skip cycle mode for improved low power efficiency. The LM5141 has a high voltage bias regulator with automatic switch-over to an external bias to reduce the IQ current from VIN. Additional features include frequency synchronization, cycle-by-cycle current limit, hiccup mode fault protection for sustained overload, and power good output.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LM5141QRGEVM — LM5141QRG 동기 벅 컨버터 평가 모듈
LM5141DESIGN-CALC — LM5141-Q1 controller quickstart design tool
TIDEP-01022 — 게이트웨이 오토모티브 레퍼런스 설계
자동차 트렌드는 빠르게 진화하고있으며, 그 결과 차량 내부로 들어오고 이동하며 클라우드로 전송되는 계속 증가하는 데이터를 효율적으로 처리하기 위해 새로운 도메인 및 영역 기반 게이트웨이 아키텍처가 사용되고 있습니다. 올바르게 작동하는 도메인(또는 영역) 게이트웨이는 기능 도메인/영역 내의 ECU와 중앙 집중식 게이트웨이 간의 데이터 이동을 안전하게 지원합니다. 중앙 집중식 게이트웨이는 차량의 수많은 도메인/영역 간에 데이터를 안전하게 이동합니다.
이 TIDEP-01022 차량용 게이트웨이 레퍼런스 설계(GCARD)는 중앙 집중식 (...)
TIPA-050000 — 산업용 애플리케이션을 위한 AM68x 기본 기능, eFuse, SD 카드 및 USB2.0 전원 공급 장치 솔루션
AM68x 프로세서용의 이 전원 공급 장치 솔루션은 SK-AM68 프로세서 스타터 키트에서 사용되는 저비용, 작은 크기 및 비안전 전원 설계를 위해 설계되었습니다. 시스템 절충점과 설계 이점을 검토하는 선택 가이드가 포함되어 있습니다. 이 가이드는 전원 설계 선택 및 기능 세트 비교를 지원합니다.
아래에 설명된 LP8733x 전원 설계는 시스템의 원하는 기능에 따라 AM68x 프로세서를 공급하는 4가지 PDN(전력 분배 네트워크) 변형을 제공합니다. 각 PDN-6x 버전에 대한 PDN 기능, 옵션 기능, 유연성 및 설계 이점을 (...)
TIPA-050001 — 산업용 애플리케이션을 위한 AM68x 기본 기능, eFuse 및 SD 카드 전원 공급 장치 솔루션
AM68x 프로세서용의 이 전원 공급 장치 솔루션은 SK-AM68 프로세서 스타터 키트에서 사용되는 저비용, 작은 크기 및 비안전 전원 설계를 위해 설계되었습니다. 시스템 절충점과 설계 이점을 검토하는 선택 가이드가 포함되어 있습니다. 이 가이드는 전원 설계 선택 및 기능 세트 비교를 지원합니다.
이 가이드에 설명된 LP8733x 전원 설계는 시스템의 원하는 기능에 따라 AM68x 프로세서를 공급하는 4가지 PDN(전력 분배 네트워크) 변형을 제공합니다. 각 PDN-6x 버전에 대한 PDN 기능, 옵션 기능, 유연성 및 설계 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGE) | 24 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.