LM317L
- Output voltage range (VO):
- Adjustable 1.25V to 37V
- Output current: Up to 100mA
- No output capacitor required for stability
- Accuracy:
- Input regulation typically 0.007% per input voltage change
- Output regulation typically 0.5%
- Ripple rejection typically:
- 71.5dB at 120Hz
- Package options:
- SOIC
- SOT-89
- TO-92 (legacy chip only)
- TSSOP (legacy chip only)
- For higher output current requirements, see LM317M (500mA) and LM317 (1.5A)
The LM317L is an adjustable, 3-terminal, positive-voltage regulator capable of supplying up to 100mA over an output-voltage range of 1.25V to 37V. The device is exceptionally easy to use and requires only two external resistors to set the output voltage.
The LM317L uses floating topology and sees only the input-to-output differential voltage. Therefore, a supply of several hundred volts can be regulated, provided the maximum input-to-output differential is not exceeded.
No capacitors are needed unless the LM317L is located far from the input filter capacitors, in which case an input bypass is needed. An optional output capacitor can be added to improve transient response.
The new chip is characterized for the junction temperature range of –40°C to +125°C for both the LM317LC and LM317LI series.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PMP15043 — 배터리 테스트 시스템을 위한 6A, 0.05% 전류 정밀 전원 솔루션 레퍼런스 설계
PMP7246 — PSFB ZTE 및 HSHB를 지원하는 36~60Vin, 350W 저속 드레인 변조 전원 컨버터 레퍼런스 디자인
This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant (...)
PMP8955 — 프로그래머블 출력 정전압 - 정전류(CVCC) 반공진 플라이백 충전기
This industrial charger reference design uses the LM5023 Quasi-Resonant Flyback controller to implement a 120VAC input design with CVCC output configured by microcontroller PWM control from 10 to 22.5V and output current from 200mA to 2A.
TIDA-00210 — 브러시드 DC 드라이브를 위한 75V/10A 보호 풀 브리지 전력계 레퍼런스 디자인
더 높은 토크와 전력이 필요한 애플리케이션의 경우, 종종 48VDC 이상의 전압이 사용되며 최대 100VDC까지 사용됩니다 TIDA-00210은 이러한 스테퍼 드라이브용 솔루션을 제공합니다. TIDA-00210은 병렬 구성에서 TIDA-00365를 기반으로 하는 2개의 보호 풀 브리지 전력 단계를 사용합니다. 각 풀 (...)
TIDA-00365 — 브러시드 DC 드라이브를 위한 75V/10A 보호 풀 브리지 전력계 레퍼런스 설계
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-89 (PK) | 3 | Ultra Librarian |
| TO-92 (LP) | 3 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |
| TSSOP (PW) | 8 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.