제품 상세 정보

Number of channels 1 Output type Open-collector, Open-drain Propagation delay time (µs) 0.2 Vs (max) (V) 36 Vs (min) (V) 5 Rating Space Features Strobe, Vos Adj Pin Iq per channel (typ) (mA) 5.1 Vos (offset voltage at 25°C) (max) (mV) 3 Rail-to-rail No Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 100 VICR (max) (V) 34 VICR (min) (V) 0.5
Number of channels 1 Output type Open-collector, Open-drain Propagation delay time (µs) 0.2 Vs (max) (V) 36 Vs (min) (V) 5 Rating Space Features Strobe, Vos Adj Pin Iq per channel (typ) (mA) 5.1 Vos (offset voltage at 25°C) (max) (mV) 3 Rail-to-rail No Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 100 VICR (max) (V) 34 VICR (min) (V) 0.5
CFP (NAC) 10 62.9285 mm² (— mm × — mm) CFP (NAD) 10 41.9832 mm² (— mm × — mm) TO-CAN (LMC) 8 80.2816 mm² (8.96 mm × 8.96 mm) CDIP (NAB) 8 79.9592 mm² (— mm × — mm) DIESALE (Y) See data sheet
  • Available with radiation ensured
    • High Dose Rate 50 krad(Si)
    • Low Dose and ELDRS Free 100 krad(Si)
  • Operates from single 5V supply
  • Input current: 200 nA max. over temperature
  • Offset current: 20 nA max. over temperature
  • Differential input voltage range: ±30V
  • Power consumption: 135 mW at ±15V
  • Power supply voltage, single 5V to ±15V
  • Offset voltage null capability
  • Strobe capability

All trademarks are the property of their respective owners.

  • Available with radiation ensured
    • High Dose Rate 50 krad(Si)
    • Low Dose and ELDRS Free 100 krad(Si)
  • Operates from single 5V supply
  • Input current: 200 nA max. over temperature
  • Offset current: 20 nA max. over temperature
  • Differential input voltage range: ±30V
  • Power consumption: 135 mW at ±15V
  • Power supply voltage, single 5V to ±15V
  • Offset voltage null capability
  • Strobe capability

All trademarks are the property of their respective owners.

The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.

Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR'ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.

Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR'ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
10개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LM111QML Voltage Comparator datasheet (Rev. C) 2013. 3. 26
* 방사능 및 안정성 보고서 LM111xRLQMLV ELDRS Characterization Report 2012. 5. 9
* SMD LM111QML-SP SMD 5962L0052401VHA 2016. 6. 21
선택 가이드 TI Space Products (Rev. L) 2026. 3. 27
Application brief DLA Approved Optimizations for QML Products (Rev. C) PDF | HTML 2025. 6. 17
애플리케이션 노트 Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. B) PDF | HTML 2025. 6. 10
추가 자료 TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing (Rev. B) 2025. 2. 20
애플리케이션 노트 Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 2022. 10. 19
Application brief Analog Front-End Design With Texas Instruments’ Tooling Landscape PDF | HTML 2022. 3. 7
e북 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017. 3. 28

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

레퍼런스 디자인

PMP22680 — 40W, ±15V 플라이백(자기 피드백 레퍼런스 설계 포함)

이 레퍼런스 설계는 70V ~ 120V DC 입력 전압으로부터 40W에서 절연 ±15V를 생성합니다. 이 설계는 광커플러의 기능을 대체하기 위해 자기 피드백 회로를 사용합니다.
지원되는 제품 및 하드웨어
레퍼런스 디자인

PMP23033 — 자기 피드백을 지원하는 40V 5V 단일 스위치 순방향 컨버터 레퍼런스 설계

이 레퍼런스 설계는 60V~120V DC 입력 전압으로부터 40W에서 절연 5V를 생성합니다. 이 설계는 광커플러의 기능을 대체하기 위해 자기 피드백 회로를 사용합니다.
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
CFP (NAC) 10 Ultra Librarian
CFP (NAD) 10 Ultra Librarian
TO-CAN (LMC) 8 Ultra Librarian
CDIP (NAB) 8 Ultra Librarian
DIESALE (Y) Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상