전력 관리 선형 및 저손실(LDO) 레귤레이터

LM1117-Q1

활성

높은 전원 공급 장치 제거 비율을 지원하는 차량용 1A 18V 저손실(LDO) 선형 레귤레이터

제품 상세 정보

Rating Automotive Vin (max) (V) 18 Vin (min) (V) 2.5 Iout (max) (A) 1 Output options Fixed Output Vout (max) (V) 12 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 3.3, 5, 12 Noise (µVrms) 60 PSRR at 100 KHz (dB) 53 Iq (typ) (mA) 0.065 Features Foldback Overcurrent protection Thermal resistance θJA (°C/W) 67.2, 95 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 900 Operating temperature range (°C) -40 to 125
Rating Automotive Vin (max) (V) 18 Vin (min) (V) 2.5 Iout (max) (A) 1 Output options Fixed Output Vout (max) (V) 12 Vout (min) (V) 1.2 Fixed output options (V) 1.2, 3.3, 5, 12 Noise (µVrms) 60 PSRR at 100 KHz (dB) 53 Iq (typ) (mA) 0.065 Features Foldback Overcurrent protection Thermal resistance θJA (°C/W) 67.2, 95 Load capacitance (min) (µF) 1 Regulated outputs (#) 1 Accuracy (%) 1 Dropout voltage (Vdo) (typ) (mV) 900 Operating temperature range (°C) -40 to 125
TO-252 (KVU) 3 66.726 mm² (6.6 mm × 10.11 mm) SOT-223 (DCY) 4 45.5 mm² (6.5 mm × 7 mm)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Input voltage range VIN:
    • Absolute maximum: 20V
    • Operating range: 2.5V to 18V
  • Output voltage range VOUT:
    • 1.2V, 3.3V, 5V, 12V fixed
    • 0.8V to 13.0V (fixed, 100mV steps) available upon request
  • Output current: Up to 1A
  • Low quiescent current IQ: 65µA (typical)
  • ±1% output accuracy
  • High PSRR:
    • 60dB at 1kHz
    • 40dB at 1MHz
  • Internal soft-start time: 500µs (typical)
  • Foldback current limiting and thermal protection
  • Stable with 1µF ceramic output capacitors
  • Packages:
    • SOT-223 (DCY), RθJA= 95.4°C/W
    • TO-252 (KVU), RθJA= 67.2°C/W
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Junction temperature: –40°C to +150°C, TJ
  • Input voltage range VIN:
    • Absolute maximum: 20V
    • Operating range: 2.5V to 18V
  • Output voltage range VOUT:
    • 1.2V, 3.3V, 5V, 12V fixed
    • 0.8V to 13.0V (fixed, 100mV steps) available upon request
  • Output current: Up to 1A
  • Low quiescent current IQ: 65µA (typical)
  • ±1% output accuracy
  • High PSRR:
    • 60dB at 1kHz
    • 40dB at 1MHz
  • Internal soft-start time: 500µs (typical)
  • Foldback current limiting and thermal protection
  • Stable with 1µF ceramic output capacitors
  • Packages:
    • SOT-223 (DCY), RθJA= 95.4°C/W
    • TO-252 (KVU), RθJA= 67.2°C/W

The LM1117-Q1 is an AEC-Q100 qualified linear voltage regulator for automotive applications. The device provides improved performance compared to traditional x1117 regulators, with tighter output accuracy and low quiescent current (IQ) to minimize standby power consumption.

The LM1117-Q1 input voltage range is from 2.5V to 18V (20V absolute maximum). The device is available in 1.2V, 3.3V, 5V, and 12V fixed output voltages.

The wide bandwidth PSRR performance of the LM1117-Q1 is typically greater than 60dB at 1kHz and 40dB at 1MHz, which attenuates the switching frequency of an upstream DC/DC converter.

Additionally, the LM1117-Q1 has an internal soft-start feature to reduce inrush current during start-up, which helps save space and cost in a design by minimizing the need for input capacitance. The LM1117-Q1 features a foldback current limit that reduces the power dissipation of the device during high-load current faults or shorting events.

The LM1117-Q1 is an AEC-Q100 qualified linear voltage regulator for automotive applications. The device provides improved performance compared to traditional x1117 regulators, with tighter output accuracy and low quiescent current (IQ) to minimize standby power consumption.

The LM1117-Q1 input voltage range is from 2.5V to 18V (20V absolute maximum). The device is available in 1.2V, 3.3V, 5V, and 12V fixed output voltages.

The wide bandwidth PSRR performance of the LM1117-Q1 is typically greater than 60dB at 1kHz and 40dB at 1MHz, which attenuates the switching frequency of an upstream DC/DC converter.

Additionally, the LM1117-Q1 has an internal soft-start feature to reduce inrush current during start-up, which helps save space and cost in a design by minimizing the need for input capacitance. The LM1117-Q1 features a foldback current limit that reduces the power dissipation of the device during high-load current faults or shorting events.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TLV767-Q1 활성 오토모티브 조정 가능 및 고정 출력, 1A, 16V, 양극 전압 저손실 선형 레귤레이터 Similar specs, not p2p

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
5개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 LM1117-Q1 18V, 1A, Automotive, Fixed-Output Linear Voltage Regulator datasheet (Rev. B) PDF | HTML 2026. 4. 16
애플리케이션 노트 An empirical analysis of the impact of board layout on LDO thermal performance (Rev. A) PDF | HTML 2025. 9. 23
애플리케이션 노트 A Topical Index of TI LDO Application Notes (Rev. F) 2019. 6. 27
e북 LDO Basics (Rev. A) 2019. 4. 8
기술 문서 LDO basics: dropout PDF | HTML 2017. 3. 16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

MLTLDO2EVM-037 — DCY, DDA 및 KVU 패키지용 범용 LDO 선형 전압 레귤레이터 평가 모듈

엔지니어들은 MLTLDO2EVM-037 멀티패키지 저 드롭아웃(LDO) 평가 모듈(EVM)을 이용해 자체 회로 애플리케이션의 가능한 사용 용도로 여러 일반 패키지의 선형 레귤레이터의 작동과 성능을 평가할 수 있습니다. 이 EVM 구성에는 엔지니어가 부품을 솔더 및 평가할 수 있도록 DDA, 3핀 및 5핀 KVU, DCY 패키지 풋프린트가 포함되어 있습니다.

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
평가 보드

TLV1117LV33EVM-714 — TLV1117LV 1A, 고정 전압 LDO 선형 레귤레이터용 평가 모듈

The TLV1117LV33EVM-714 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TLV1117LVxx device, which is a 1-A, positive fixed-voltage low-dropout (LDO) linear regulator.
사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
시뮬레이션 모델

LM1117 1P8 PSpice Transient Model

SNOM484.ZIP (56 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 1P8 Unencrypted PSpice Transient Model

SNOM483.ZIP (1 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 2P5 PSpice Transient Model

SNOM481.ZIP (61 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 2P5 Unencrypted PSpice Transient Model

SNOM482.ZIP (1 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 2P85 PSpice Transient Model

SNOM480.ZIP (59 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 2P85 Unencrypted PSpice Transient Model

SNOM479.ZIP (1 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 3P3 PSpice Transient Model

SNOM487.ZIP (60 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 3P3 Unencrypted PSpice Transient Model

SNOM488.ZIP (1 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 5P0 PSpice Transient Model

SNOM486.ZIP (57 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 5P0 Unencrypted PSpice Transient Model

SNOM485.ZIP (1 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 ADJ PSpice Transient Model

SNOM556.ZIP (61 KB) - PSpice 모델
지원되는 제품 및 하드웨어
시뮬레이션 모델

LM1117 Adjustable Unencrypted PSpice Transient Model

SNOM557.ZIP (1 KB) - PSpice 모델
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
TO-252 (KVU) 3 Ultra Librarian
SOT-223 (DCY) 4 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상