ISOM8710
- Drop-in replacement and pin-to-pin upgrade to industry standard high-speed digital optocouplers
- Single-channel diode-emulator input
- Output options:
- ISOM8710: CMOS
- ISOM8711: Open-collector
- Wide supply range (VCC): 2.7V to 5.5V
- High data rate: up to 25Mbps
- Maximum propagation delay: 52ns
- Maximum pulse width distortion: 17ns
- Maximum propagation delay skew: 15ns
- Robust isolation barrier:
- Isolation rating: up to 3750VRMS
- Working voltage: 500VRMS
- Surge capability: up to 10kV
- Minimum transient immunity: ±125kV/µs
- Wide temperature range: –40°C to +125°C
- Small SOIC-5 package
- Safety-related certifications:
- UL 1577 recognition, 3750VRMS isolation
- DIN EN IEC 60747-17 (VDE 0884-17) conformity per VDE
- IEC 62368-1, IEC 61010-1, IEC 60601-1
- CQC GB 4943.1
The ISOM871x devices are single-channel opto-emulators with diode-emulator inputs and digital outputs. The devices are pin-compatible and drop-in replaceable for many traditional optocouplers, allowing enhancement to industry-standard packages with no PCB redesign. These devices can transmit data rates up to 25Mbps and can output 3.3V and 5V signals with two logic-output options: CMOS-compatible output (ISOM8710) and open-collector output (ISOM8711).
ISOM871x opto-emulators offer significant reliability and performance advantages compared to optocouplers, including high common mode transient immunity (CMTI), low propagation delay, small pulse width distortion (PWD), low power consumption, wider temperature ranges, and tight process controls resulting in small part-to-part skew. Since there is no aging effect to compensate for, the emulated diode-input stage consumes less power than optocouplers. ISOM871x devices are offered in a small SOIC-5 package, supporting a 3.75kVRMS isolation rating. The high performance and reliability of the device enable the use in motor drives, I/O modules in industrial controllers, factory automation applications, and more. To learn more about the advantages of opto-emulator technology, please read Introduction to Opto-emulators.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ISOM-EVM — 범용 옵토 에뮬레이터 평가 모듈
ISOM8710DFFEVM — 3.75kVRMS 고속 단일 채널 옵토 에뮬레이터용 ISOM8710 평가 모듈
ISOM8710DFFEVM은 5핀 DFF SOIC 패키지에 들어 있는 고속 단일 채널 옵토 에뮬레이터 ISOM8710 평가에 사용되는 평가 모듈입니다. 이 EVM에는 추가 풋프린트가 있어 사용자는 외부 구성품들을 신축적으로 추가해 다양한 공통 애플리케이션을 테스트할 수 있습니다. EVM에는 최소한의 외부 구성품으로 장치를 평가할 수 있는 충분한 테스트 포인트와 점퍼 옵션이 있습니다.
TIDA-010956 — 통합 모터 드라이브를 위한 48V, 85A 소형 폼 팩터 3상 인버터 레퍼런스 설계
이 레퍼런스 설계는 48V DC 입력, 85ARMS 출력, 3상 모터 드라이브 인버터를 보여줍니다. 100V 지능형 하프 브리지 게이트 드라이버 DRV8162L은 작은 크기와 견고하고 효율이 높은 전력계를 지원합니다. STO(Safe Torque Off) 기능을 위해 DRV8162L의 분할 전원 공급 아키텍처를 사용하는 멀티 채널 셧다운 경로가 제안됩니다. DRV8162L의 내부 VDS 모니터 및 보호 기능은 과전류 고장으로부터 장치를 보호합니다. 정밀 모터 전류 감지는 INA241A를 사용하여 위상 A와 B, 그리고 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (DFF) | 5 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.