INA849
- Ultra-low noise: 1-nV/√Hz input voltage noise (typical)
- Precision super-beta input
performance:
- Low offset voltage: 35 µV (maximum)
- Low offset voltage drift: 0.4 µV/°C (maximum)
- Low input bias current: 20 nA (maximum)
- Low gain drift: 5 ppm/°C for G = 1 (maximum)
- Bandwidth: 28 MHz (G = 1), 8 MHz (G = 100)
- Slew rate: 35 V/µs
- Common-mode rejection: 120 dB (minimum) for maximum gain
- Supply range:
- Single supply: 8 V to 36 V
- Dual supply: ±4 V to ±18 V
- Specified temperature range: –40°C to +125°C
- Packages: 8-pin SOIC and VSSOP
The INA849 is an ultra-low noise instrumentation amplifier optimized for maximum accuracy in high-resolution systems and operation over a wide single-supply or dual-supply range. The device offers significantly lower input bias current than competitors as a result of super-beta input transistors. A state-of-the-art manufacturing process provides exceptionally low voltage noise, input offset voltage, and offset voltage drift.
Precisely matched integrated resistors provide a high, 92-dB (G = 1) common-mode rejection across the full input common-mode range. A single external resistor sets any gain from 1 to 10,000. The current-feedback topology of the INA849 provides wide bandwidth at higher gains for very-small, fast-moving signals. For example, the device provides 8 MHz of bandwidth at G = 100, and 28 MHz at a G = 1, with a fast 0.4-µs settling time (0.01%) for directly driving high-resolution, analog-to-digital converters (ADCs).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | INA849 Ultra-Low-Noise (1 nV/√Hz), High-Bandwidth, Instrumentation Amplifier datasheet (Rev. B) | PDF | HTML | 2021. 4. 23 | |
| Application brief | Ultra-Low-Noise JFET Preamplifier Design for High Impedance Sensors | PDF | HTML | 2024. 5. 16 | ||
| 애플리케이션 노트 | Amplifier Input Common-Mode and Output-Swing Limitations | PDF | HTML | 2022. 1. 14 | ||
| 애플리케이션 노트 | Importance of Input Bias Current Return Paths in Instrumentation Amplifier Apps | PDF | HTML | 2021. 7. 27 | ||
| Application brief | How to Select Precision Amplifiers for Semiconductor Testers (Rev. A) | PDF | HTML | 2020. 12. 3 | ||
| 기술 문서 | What is an instrumentation amplifier? | PDF | HTML | 2019. 8. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
INAEVM-ALT-SO8 — SO-8(D) 패키지의 대체 핀아웃이 있는 계측 증폭기용 평가 모듈
INAEVM-ALT-SO8은 대체 핀아웃을 지원하는 계측 증폭기 평가 모듈(EVM)이며 사용 설명서에 나와 있는 핀아웃으로 SO-8(D) 패키지의 정밀 계측 증폭기 프로토타입 제작을 단순화하는 데 사용됩니다. 이 EVM은 채워지지 않은 보드이므로 계측 증폭기 장치 샘플을 별도로 주문해야 합니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGK) | 8 | Ultra Librarian |
| SOIC (D) | 8 | Ultra Librarian |