INA826
- Input common-mode range: Includes V–
- Common-mode rejection:
- 104 dB, min (G = 10)
- 100 dB, min at 5 kHz (G = 10)
- Power-supply rejection: 100 dB, min (G = 1)
- Low offset voltage: 150 µV, max
- Gain drift: 1 ppm/°C (G = 1), 35 ppm/°C (G > 1)
- Noise: 18 nV/√Hz, G ≥ 100
- Bandwidth: 1 MHz (G = 1), 60 kHz (G = 100)
- Inputs protected up to ±40 V
- Rail-to-rail output
- Supply current: 200 µA
- Supply
range:
- Single supply: 3 V to 36 V
- Dual supply: ±1.5 V to ±18 V
- Specified temperature range:
–40°C to +125°C - Packages: 8-pin VSSOP, SOIC, and WSON
The INA826 is a cost-effective instrumentation amplifier that offers extremely low power consumption and operates over a very wide single-supply or dual-supply range. A single external resistor sets any gain from 1 to 1000. The device offers excellent stability over temperature, even at G > 1, as a result of the low gain drift of only 35 ppm/°C (maximum).
The INA826 is optimized to provide excellent common-mode rejection ratio of over 100 dB (G = 10) over frequencies up to 5 kHz. At G = 1, the common-mode rejection ratio exceeds 84 dB across the full input common-mode range, from the negative supply all the way up to 1 V of the positive supply. Using a rail-to-rail output, the INA826 is a great choice for low-voltage operation from a 3-V single supply, as well as dual supplies up to ±18 V.
Additional circuitry protects the inputs against overvoltage of up to ±40 V beyond the power supplies by limiting the input currents to less than 8 mA.
The INA826 is available in 8-pin SOIC, VSSOP, and tiny 3-mm × 3-mm WSON surface-mount packages. All versions are specified for the –40°C to +125°C temperature range.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
INA826EVM — INA826 평가 모듈
The INA826EVM is intended to provide basic functional evaluation of the INA826.
INAEVM-ALT-SO8 — SO-8(D) 패키지의 대체 핀아웃이 있는 계측 증폭기용 평가 모듈
INAEVM-ALT-SO8은 대체 핀아웃을 지원하는 계측 증폭기 평가 모듈(EVM)이며 사용 설명서에 나와 있는 핀아웃으로 SO-8(D) 패키지의 정밀 계측 증폭기 프로토타입 제작을 단순화하는 데 사용됩니다. 이 EVM은 채워지지 않은 보드이므로 계측 증폭기 장치 샘플을 별도로 주문해야 합니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
TIDA-00171 — 모터 드라이브용 절연 전류 션트 및 전압 측정 레퍼런스 디자인
This evaluation kit and reference design implements the AMC130x reinforced isolated delta-sigma modulators along with integrated Sinc filters in the C2000™ TMS320F28377D Delfino™ microcontroller. The design provides an ability to evaluate the performance of these measurements: three motor (...)
TIDA-00209 — AM437x를 사용하는 모터 드라이브를 위한 절연 전류 션트 및 전압 측정 레퍼런스 디자인
This reference design uses the AMC130x reinforced isolated delta-sigma modulators along with AM437x Sitara™ ARM® Cortex® -A9 Processor, which implements Sinc filters on PRU-ICSS. The design provides an ability to evaluate the performance of these measurements: three motor currents, three (...)
TIDA-00548 — 안전 애플리케이션을 위한 4~20mA 아날로그 입력 모듈 레퍼런스 디자인
TIDA-010065 — 고효율, 저방출, 절연 DC/DC 컨버터 기반 아날로그 입력 모듈 레퍼런스 설계
TIPD164 — 산업용 출력을 위한 아날로그 입력 모듈 및 온도 센서 레퍼런스 디자인
This reference design that is precision verified implements an analog input module for industrial voltages, currents and temperature sensors. For industrial outputs, the possible input ranges include: 4 to 20 mA, 0 to 20 mA, +/-25 mA, 0 to 5 V, 0 to 10 V, +/-5 V and +/-10 V. The design (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |
| WSON (DRG) | 8 | Ultra Librarian |