The INA592 device is a low-power, wide bandwidth difference amplifier consisting of a precision operational amplifier (op amp) and a precision resistor network. Excellent tracking of resistors (TCR) maintains gain accuracy and common-mode rejection over temperature. Unique features such as low offset 40 µV (maximum), low offset drift (2 µV/°C maximum) high slew rate (18 V/µs), and high capacitive load drive of up to 500 pF make the INA592 a robust, high-performance difference amplifier for high-voltage industrial applications. The common-mode range of the internal op amp extends to the negative supply, enabling the device to operate in single-supply applications. The device operates on single (4.5 V to 36 V) or dual supplies (±2.25 V to ±18 V).
The difference amplifier is the foundation of many commonly used circuits. The INA592 provides this circuit function without using an expensive precision resistor network.
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | INA592 High-Precision, Wide-Bandwidth e-trim™ Difference Amplifier datasheet (Rev. F) | PDF | HTML | 2021/04/23 |
| Application note | PLC Analog Output Module Architectures | PDF | HTML | 2025/01/29 | |
| Application brief | Offset Correction Methods: Laser Trim, e-Trim, and Chopper (Rev. D) | PDF | HTML | 2024/12/05 | |
| Application note | Analysis of Improved Howland Current Pump Configurations (Rev. A) | PDF | HTML | 2023/02/09 | |
| Analog Design Journal | Precision signal-conditioning solutions for motor control with position feedback | 2019/06/14 | ||
| Analog Design Journal | High-side current sources for industrial applications | 2019/03/12 | ||
| Application brief | Level Shifting Signals With Differential Amplifiers (Rev. A) | 2018/04/02 | ||
| Application note | Extending the Common-Mode Range of Difference Amplifiers | 2000/09/27 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
소형 표면 실장 IC(집적 회로)와 쉽고 빠르며 경제적인 방식으로 인터페이싱하는 방법을 제공하는 DIP 어댑터 평가 모듈(DIP-ADAPTER-EVM)로 연산 증폭기 프로토타이핑 및 테스트 속도를 높이세요. 제품에 포함된 Samtec 터미널 스트립을 사용하여 지원되는 연산 증폭기를 연결하거나 기존 회로에 직접 연결할 수 있습니다.
DIP 어댑터 EVM 키트는 다음을 포함해 가장 널리 사용되는 6개의 업계 표준 패키지를 지원합니다.
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| VSON (DRC) | 10 | Ultra Librarian |
| VSSOP (DGK) | 8 | Ultra Librarian |
Calculator installer
General calculator tool for analog design support.