홈 증폭기 계측 증폭기
홈
증폭기
계측 증폭기
신규

INA1H182-SEP

활성

Radiation-tolerant, low offset, 7nV/rtHz noise, low-power instrumentation amplifier

지금 주문하기
데이터 시트

INA1H182-SEP

활성
데이터 시트 지금 주문하기

제품 상세 정보

Number of channels 1 Vs (max) (V) 18 Vs (min) (V) 4.5 Input offset (±) (max) (µV) 55 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 10000 Noise at 1 kHz (typ) (nV√Hz) 7 Features Overvoltage protection, Small Size, Super-beta CMRR (min) (dB) 136 Input offset drift (±) (max) (µV/°C) 0.4 Input bias current (±) (max) (nA) 0.5 Iq (typ) (mA) 0.6 Bandwidth at min gain (typ) (MHz) 4.7 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -55 to 125 Rating Space Type Resistor Gain nonlinearity (±) (max) (%) 0.0015 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.14
Number of channels 1 Vs (max) (V) 18 Vs (min) (V) 4.5 Input offset (±) (max) (µV) 55 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 10000 Noise at 1 kHz (typ) (nV√Hz) 7 Features Overvoltage protection, Small Size, Super-beta CMRR (min) (dB) 136 Input offset drift (±) (max) (µV/°C) 0.4 Input bias current (±) (max) (nA) 0.5 Iq (typ) (mA) 0.6 Bandwidth at min gain (typ) (MHz) 4.7 Gain error (±) (max) (%) 0.15 Operating temperature range (°C) -55 to 125 Rating Space Type Resistor Gain nonlinearity (±) (max) (%) 0.0015 Output swing headroom (to negative supply) (typ) (V) 0.15 Output swing headroom (to positive supply) (typ) (V) -0.15 Input common mode headroom (to negative supply) (typ) (V) 2 Input common mode headroom (to positive supply) (typ) (V) -2 Noise at 0.1 Hz to 10 Hz (typ) (µVPP) 0.14
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Radiation tolerant
    • Total ionizing dose (TID) RLAT for every wafer up to 30krad(Si)
    • ELDRS-free up to TID = 30krad(Si)
    • Single event latch-up (SEL) immune to 43MeV×cm2 /mg
    • Single event effect (SEE) characterized to 43MeV×cm2 /mg
  • Space enhanced plastic
    • Supports defense and aerospace applications
    • Controlled baseline
    • One assembly and test site
    • One Fabrication site
    • Extended product life cycle
    • Product traceability
    • Outgassing test performed per ASTM E595
    • Au bondwire and NiPdAu lead finish
  • Low offset voltage: 10µV (typical)
  • Input stage voltage noise: 7nV/√Hz
  • Bandwidth: 2MHz at G = 1, 190kHz at G = 100
  • Inputs protected up to ±40V
  • Common-mode rejection: 110dB, G = 10 (min)
  • Power supply rejection: 110dB, G = 1 (min)
  • Supply current: 650µA (max)
  • Supply range:
    • Single-supply: 4.5V to 18V
    • Dual-supply: ±2.25V to ±9V
  • Packages: 8-pin VSSOP
  • Radiation tolerant
    • Total ionizing dose (TID) RLAT for every wafer up to 30krad(Si)
    • ELDRS-free up to TID = 30krad(Si)
    • Single event latch-up (SEL) immune to 43MeV×cm2 /mg
    • Single event effect (SEE) characterized to 43MeV×cm2 /mg
  • Space enhanced plastic
    • Supports defense and aerospace applications
    • Controlled baseline
    • One assembly and test site
    • One Fabrication site
    • Extended product life cycle
    • Product traceability
    • Outgassing test performed per ASTM E595
    • Au bondwire and NiPdAu lead finish
  • Low offset voltage: 10µV (typical)
  • Input stage voltage noise: 7nV/√Hz
  • Bandwidth: 2MHz at G = 1, 190kHz at G = 100
  • Inputs protected up to ±40V
  • Common-mode rejection: 110dB, G = 10 (min)
  • Power supply rejection: 110dB, G = 1 (min)
  • Supply current: 650µA (max)
  • Supply range:
    • Single-supply: 4.5V to 18V
    • Dual-supply: ±2.25V to ±9V
  • Packages: 8-pin VSSOP

The INA1H182-SEP is a radiation-tolerant, high-precision instrumentation amplifier that offers low power consumption and operates over a wide single-supply or dual-supply range. A single external resistor sets any gain from 1 to 10,000. The device has high precision as a result of super-beta input transistors, which provide low input offset voltage, offset voltage drift, input bias current, and input voltage and current noise. Additional circuitry protects the inputs against overvoltage up to ±40V.

The INA1H182-SEP is optimized to provide a high common-mode rejection ratio. At gain (G) = 1, the common-mode rejection ratio exceeds 90dB across the full input common-mode range. The device is designed for low-voltage operation from a 4.5V single supply, and dual supplies up to ±9V.

The INA1H182-SEP is available in an 8-pin VSSOP package.

The INA1H182-SEP is a radiation-tolerant, high-precision instrumentation amplifier that offers low power consumption and operates over a wide single-supply or dual-supply range. A single external resistor sets any gain from 1 to 10,000. The device has high precision as a result of super-beta input transistors, which provide low input offset voltage, offset voltage drift, input bias current, and input voltage and current noise. Additional circuitry protects the inputs against overvoltage up to ±40V.

The INA1H182-SEP is optimized to provide a high common-mode rejection ratio. At gain (G) = 1, the common-mode rejection ratio exceeds 90dB across the full input common-mode range. The device is designed for low-voltage operation from a 4.5V single supply, and dual supplies up to ±9V.

The INA1H182-SEP is available in an 8-pin VSSOP package.
filter 기타 계측 증폭기 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
6개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet INA1H182-SEP Low Offset, 7nV/√ Hz Noise, Low-Power, Radiation-Tolerant, Precision Instrumentation Amplifier in Space-Enhanced Plastic datasheet PDF | HTML 2026/03/24
* Radiation & reliability report INA1H182-SEP Neutron Displacement Damage (NDD) Characterization 2026/03/18
* Radiation & reliability report INA1H182-SEP Radiation-Tolerant, Low offset, Low Noise, Precision Instrumentation Amplifier TID Report 2026/03/18
* Radiation & reliability report INA1H182-SEP Single-Event Effects (SEE) Radiation Report PDF | HTML 2026/03/18
* Radiation & reliability report INA1H182-SEP Production Flow and Reliability Report PDF | HTML 2026/02/25
Selection guide TI Space Products (Rev. L) 2026/03/27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

INA1H182-SEP PSpice Model

SLVMER8.ZIP (30 KB) - PSpice Model
다운로드
시뮬레이션 모델

INA1H182-SEP TINA-TI Reference Design

SLVMES0.TSC (1232 KB) - TINA-TI Reference Design
다운로드
시뮬레이션 모델

INA1H182-SEP TINA-TI SPICE Model

SLVMER9.ZIP (6 KB) - TINA-TI Spice Model
다운로드
계산 툴

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
시작 다운로드
시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
요청
시뮬레이션 툴

TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
사용 설명서: PDF
View Options
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VSSOP (DGK) 8 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상