DS90UB971-Q1
- AEC-Q100 Qualified for automotive
applications:
- Device temperature: -40 to 115°C ambient operating temperature range specified for electrical performance
- 7.55Gbps (6Gbps Video Payload) supports high-speed sensors including 8MP+ imagers
- Power-over-Coax (PoC) compatible transceiver
- Single MIPI D-PHY port with 4 lanes
- Compliant to MIPI D-PHY v2.1
- 1 Clock lane and 1, 2, or 4 configurable data lanes
- Up to 1.5Gbps/lane, 6Gbps/port
- Supports polarity pin inversion (p/n)
- 16 Virtual channels
- Single port MIPI CSI-2 receiver
- Compliant to MIPI CSI-2 v2.1
- Supports multiple data types and multi-exposure
- Advanced data protection and diagnostics including CRC data protection, sensor data integrity check, I2C write protection, voltage and temperature measurement, programmable alarm and line fault detection
- Flexible programmable output clock generator
- Supports single-ended coaxial or Shielded-Twisted-Pair (STP) cable
- Ultra-low latency bidirectional I2C and GPIO control channel enables ISP control from ECU
- Single 1.8V power supply
- Compatible with DS90UB9702-Q1, DS90UB954-Q1, DS90UB936-Q1, DS90UB960-Q1, DS90UB962-Q1 deserializers
- Pin compatible with DS90UB953-Q1, DS90UB953A-Q1, DS90UB935-Q1, DS90UB951-Q1 serializers
- Small 5mm × 5mm VQFN package and solution size for compact sensor module designs
-
Functional Safety-Compliant
- Developed for functional safety applications
- Documentation available to aid ISO 26262 system design up to ASIL B
The DS90UB971-Q1 serializer represents the first generation in FPD-Link IV serializers and is designed to support ultra-high-speed raw data sensors including 8MP+ Imagers, satellite RADAR, LIDAR, and Time-of-Flight (ToF) sensors. The chip delivers an 7.55Gbps forward channel and an ultra-low latency, 47.1875Mbps bidirectional control channel and supports power over a single coax (PoC) or STP cable. The DS90UB971-Q1 features advanced data protection and diagnostic features to support ADAS and automotive functional safety. Together with a companion deserializer, the DS90UB971-Q1 delivers precise multi-camera sensor clock and sensor synchronization.
The DS90UB971-Q1 is fully AEC-Q100 qualified with a wide temperature range of –40°C to 115°C. The serializer comes in a small 5mm × 5mm VQFN package for space-constrained sensor applications.
추가 정보 요청
전체 데이터 시트를 사용할 수 있습니다. 지금 요청
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DS90UB971 -Q1 FPD-Link IV 7.55-Gbps Serializer With CSI-2 Interface for 8MP+ Cameras, RADAR & Other Sensors datasheet (Rev. A) | PDF | HTML | 2025. 1. 3 | |
| 애플리케이션 노트 | Remote Wake-up, Sleep, and Surveillance Modes for FPD-Link III and FPD-Link | PDF | HTML | 2026. 1. 22 | ||
| 애플리케이션 노트 | Optimizing FPD-Link ADAS Designs for System Level ESD Immunity (Rev. B) | PDF | HTML | 2025. 10. 29 | ||
| 인증서 | DS90UB971-Q1EVM EU Declaration of Conformity (DoC) | 2020. 9. 3 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DS90UB971-Q1EVM — DS90UB971-Q1 평가 모듈
ALP — Analog LaunchPad Framework Utility
FPD-LINK-EXPLORER-APPSW — FPD-Link Explorer (FLEx)
ALP-PROFILE-UPDATE — Analog LaunchPad Profile Update Software
TIDA-020093 — 차량 전방 레이더용 단일 칩 mmWave 스트리밍 레이더 레퍼런스 설계
더 많은 자율 주행 기능을 통해 자동차 산업은 레이더 가치 및 성능 최적화에 주력하고 있습니다. 원시 레이더 데이터 스트리밍 토폴로지를 통해 레이더 성능 및 비용을 개선할 수 있습니다. 이 레퍼런스 설계는 높은 각도 분해능을 위해 8TX 및 8RX 안테나 요소를 갖춘 AWR2188 레이더 프론트 엔드를 제공합니다. 중앙 처리 장치에 원시 데이터를 전송하기 위한 DS90UB971S-Q1 FPD-Link™ 시리얼라이저와 MSPM0G3519-Q1 컨트롤러가 결합된 본 설계는 스트리밍 레이더 애플리케이션을 구현합니다. 본 시스템은 넓은 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.