DS90C189-Q1
- AEC-Q100 Qualified for Automotive Applications with the Following Specifications:
- Device Temperature Grade 2: –40°C to +105°C Ambient Operating Temperature
- Device HBM ESD Classification Level ±8 kV
- Device CDM ESD Classification Level ±750 V
- 150 mW Typical Power Consumption at 185 MHz (SIDO Mode)
- Drives QXGA and WQXGA Class Displays
- Two Operating Modes:
- Single Pixel In, Single Pixel Out (SISO): 105 MHz Maximum
- Single Pixel In, Dual Pixel Out (SIDO): 185 MHz Maximum
- Supports 24-Bit RGB
- Supports 3D+C, 4D+C, 6D+C, 6D+2C, 8D+C, and 8D+2C LVDS Configurations
- Compatible With FPD-Link Devices
- Operates Off a Single 1.8-V Supply
- Interfaces Directly With 1.8-V LVCMOS
- Less Than 10 mW Power Consumption in Sleep Mode
- Spread Spectrum Clock Compatible
- Small 9 mm × 9 mm × 0.9 mm 64-Pin VQFN Package
The DS90C189-Q1 is a low power bridge for automotive applications that reduces the size of the RGB interface between the host GPU and the Display.
The DS90C189-Q1Bridge is designed to support single pixel data transmission between a Host and a Flat Panel Display at resolutions of up to QXGA (2048x1536) at 60 Hz. The transmitter converts up to 24 bits (Single Pixel 24-bit color) of 1.8-V LVCMOS data into two channels of 4 data + clock (4D+C) reduced width interface LVDS compatible data streams.
DS90C189-Q1 supports 2 modes of operation.
- In single pixel mode in/out mode, the device can drive up to SXGA+ (1400x1050) at 60 Hz. In this mode, the device converts one bank of 24-bit RGB data to a one channel 4D+C LVDS data stream.
- In single pixel in / dual pixel out mode, the device can drive up to WUXGA+ (1920x1440) at 60 Hz. In this configuration, the device provides single-to-dual pixel conversion and converts one bank of 24-bit RGB data into two channels of 4D+C LVDS streams at half the pixel clock rate.
For all the modes, the device supports 24bpp color.
The DS90C189-Q1 is offered in a small 64 pin QFN package and features single 1.8 V supply for minimal power dissipation.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DS90C189-Q1 Low Power, 1.8 V RGB-to-Open LDI (LVDS) Bridge datasheet (Rev. B) | PDF | HTML | 2020. 9. 1 | |
| 애플리케이션 노트 | High-Speed Layout Guidelines for Reducing EMI for LVDS SerDes Designs | 2018. 11. 9 | |||
| 기술 문서 | Finding the right pixel clock frequency and throughput for an LVDS display resolut | PDF | HTML | 2018. 9. 26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TIDEP-01002 — Jacinto™ 차량용 프로세서를 갖춘 비용 최적화된 디지털 클러스터 오토모티브 레퍼런스 설계
Jacinto™ 차량용 프로세서 DCARD(디지털 클러스터 차량용 레퍼런스 디자인)는 재구성 가능한 디지털 클러스터 시스템을 위한 비용 최적화된 설계입니다. DCARD는 전체 시스템 BOM을 최적화하면서 1920x720 해상도 디스플레이에서 60fps 디지털 클러스터 솔루션을 구현할 수 있는 완전한 독립적 6계층 PCB 설계입니다. 또한 DCARD는 경고음, CAN 웨이크업 및 이더넷 연결을 위한 단일 존 오디오 출력도 지원합니다. 최종 제품 요구 사항을 기반으로 기능을 추가할 수 있습니다. 예를 들어, 카메라 입력은 후방 뷰 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFNP (RTD) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.