DRV8850
- H-Bridge Motor Driver
- Drives a DC Motor, One Winding of a Stepper Motor, or Other Loads
- Low MOSFET On-Resistance: 65 mΩ HS + LS at 4.2V, 25°C
- 5-A Continuous 8-A Peak-Drive Current
- Internal Current Sensing With Current Sense Output
- 2 to 5.5-V Operating Supply Voltage Range
- Overvoltage and Undervoltage Lockout
- Low-Power Sleep Mode
- 100-mA Isolated Low-Dropout (LDO) Voltage Regulator
- 24-Pin VQFN Package
The DRV8850 device provides a motor driver plus LDO voltage regulator solution for consumer products, toys, and other low-voltage or battery-powered motion-control applications. The device has one H-bridge driver to drive a DC motor, a voice-coil actuator, one winding of a stepper motor, a solenoid, or other devices. The output driver block consists of N-channel power MOSFETs configured as an H-bridge to drive the load. An internal charge pump generates the needed gate-drive voltages.
The DRV8850 device supplies up to 5 A of continuous output current (with proper PCB heat sinking) and up to 8-A peak current. It operates on a supply voltage from 2 V to 5.5 V.
A low-dropout linear voltage regulator is integrated with the motor driver to supply power to microcontrollers or other circuits. The LDO voltage regulator can be active in device sleep mode, so that the driver may be shut down without removing power to any devices powered by the LDO voltage regulator.
Internal shutdown functions provide overcurrent, short circuit, undervoltage,
overvoltage, and
overtemperature protection. In addition, the device also has built-in current sensing for
accurate current measurement.
The DRV8850 device is packaged in a 24-pin VQFN
(3.5-mm × 5.5-mm) package (Eco-friendly: RoHS and no Sb/Br).
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8850 Low-Voltage H-Bridge IC With LDO Voltage Regulator datasheet (Rev. D) | PDF | HTML | 2019. 10. 8 | |
| Application brief | Advantages of Integrated Current Sensing (Rev. B) | PDF | HTML | 2022. 6. 20 | ||
| 애플리케이션 노트 | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021. 10. 14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8850EVM — DRV8850EVM - LDO 전압 레귤레이터를 지원하는 저전압 H 브리지 모터 드라이버용 평가 모듈
The DRV8850 device provides a motor driver plus LDO voltage regulator solution for applications requiring a high start-up torque with superior thermal performance in mind. The device has one H-bridge driver to drive a DC motor, a voice-coil actuator, one winding of a stepper motor or other types of (...)
TIDA-00602 — 전동 칫솔 컨트롤러 레퍼런스 디자인
This reference design uses our low-voltage H-Bridge motor driver with an integrated low dropout (LDO) voltage regulator and an ultra-low-power microcontroller (MCU) to demonstrate a full implementation of a battery-powered electric toothbrush.
TIDA-00616 — 브러시드 DC 모터 컨트롤을 위한 에너지 하베스팅 런치패드 부스터팩 레퍼런스 디자인
브러시드 DC 모터 컨트롤의 에너지 하베스팅 런치패드는 태양광 에너지를 사용하여 리튬 이온 또는 리튬 폴리머 배터리를 충전하고, 이후에는 전압 레귤레이터를 사용하여 TI 런치패드와 런치패드에 연결된 모든 주변기기에 보조 시스템 전원을 제공하도록 설계되었습니다. 부스터팩은 온보드 나노 타이머 및 듀얼 H 브리지 모터 드라이버를 사용하여 초저전력 및 자동화 애플리케이션을 위해 설계되었으며, 초저 45mΩ RDS(on)의 MOSFET이 통합된 듀얼 H 브리지 모터 드라이버를 사용합니다.
TIDA-01162 — 통합 대 개별 저전압 모터 드라이브 비교 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGY) | 24 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.