DRV8832-Q1
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C4B
- H-Bridge Voltage-Controlled Motor Driver
- Drives DC Motor, One Winding of a Stepper Motor, or Other Actuators/Loads
- Efficient PWM Voltage Control for Constant Motor Speed With Varying Supply Voltages
- Low MOSFET
ON-Resistance:
HS + LS 450 mΩ
- 1-A Maximum DC/RMS or Peak Drive Current
- 2.75-V to 6.8-V Operating Supply Voltage Range
- 300-nA (Typical) Sleep Mode Current
- Reference Voltage Output
- Current Limit Circuit
- Fault Output
- Thermally Enhanced Surface Mount Packages
The DRV8832-Q1 device provides an integrated motor driver solution for battery-powered toys, printers, and other low-voltage or battery-powered motion control applications. The device has one H-bridge driver, and can drive one DC motor or one winding of a stepper motor, as well as other loads like solenoids. The output driver block consists of N-channel and P-channel power MOSFETs configured as an H-bridge to drive the motor winding.
Provided with sufficient PCB heatsinking, the DRV8832-Q1 can supply up to 1-A of DC/RMS or peak output current. It operates on power supply voltages from 2.75 V to 6.8 V.
To maintain constant motor speed over varying battery voltages while maintaining long battery life, a PWM voltage regulation method is provided. An input pin allows programming of the regulated voltage. A built-in voltage reference output is also provided.
Internal protection functions are provided for over current protection, short-circuit protection, undervoltage lockout, and overtemperature protection.
The DRV8832-Q1 also provides a current limit function to regulate the motor current during conditions like motor startup or stall, as well as a fault output pin to signal a host processor of a fault condition.
The DRV8832-Q1 is available in tiny 3-mm x 3-mm 10-pin MSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8832-Q1 Low-Voltage Motor Driver IC datasheet (Rev. C) | PDF | HTML | 2015. 12. 31 | |
| 애플리케이션 노트 | Understanding Motor Driver Current Ratings (Rev. A) | PDF | HTML | 2024. 7. 5 | ||
| 애플리케이션 노트 | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021. 10. 14 | ||
| 애플리케이션 노트 | Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) | PDF | HTML | 2021. 7. 22 | ||
| 애플리케이션 노트 | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 2021. 1. 19 | ||
| 애플리케이션 노트 | Protecting Automotive Motor Drive Systems from Reverse Polarity Conditions (Rev. A) | 2019. 2. 19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8832EVM — DRV8832 평가 모듈
The DRV8832 evaluation module consists of a 1A, H-bridge motor driver with a parallel control interface and a small number of external components that can be used to drive one brushed DC motor or other loads like solenoids. With the DRV8832EVM, designers can quickly and easily evaluate the (...)
TIDA-00141 — 플립업 디스플레이용 차량용 브러시드 모터 드라이버
이 TIDA-00141 레퍼런스 설계는 푸시-투-오픈 및 푸시-투-클로즈 모터 드라이브 시스템을 위한 빠른 설정 가이드를 제공하여 인포테인먼트 시스템의 플립업 디스플레이 작동을 활성화합니다. 이 솔루션은 두 가지 피드백 방식도 함께 보여줍니다. 하나는 리미트 스위치를 사용하는 방식이고, 다른 하나는 모터 드라이버의 전류 제한 설정을 활용하는 방식입니다. 출시 일정을 앞당기기 위해 빠른 솔루션을 구현하는 이 설계는 차량용으로 인증된 모든 장치를 사용하고, 배터리에 직접 연결할 수 있으며, 소프트웨어 작업이 필요하지 않습니다. 이 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HVSSOP (DGQ) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.