DRV8832
- H-Bridge Voltage-Controlled Motor Driver
- Drives DC Motor, One Winding of a Stepper
Motor, or Other Actuators/Loads - Efficient PWM Voltage Control for Constant
Motor Speed With Varying Supply Voltages - Low MOSFET On-Resistance:
HS + LS 450 mΩ
- Drives DC Motor, One Winding of a Stepper
- 1-A Maximum DC/RMS or Peak Drive Current
- 2.75-V to 6.8-V Operating Supply Voltage Range
- 300-nA (Typical) Sleep Mode Current
- Reference Voltage Output
- Current Limit Circuit
- Fault Output
- Thermally-Enhanced Surface Mount Packages
The DRV8832 provides an integrated motor driver solution for battery-powered toys, printers, and other low-voltage or battery-powered motion control applications. The device has one H-bridge driver, and can drive one DC motor or one winding of a stepper motor, as well as other loads like solenoids. The output driver block consists of N-channel and P-channel power MOSFETs configured as an H-bridge to drive the motor winding.
Provided with sufficient PCB heatsinking, the DRV8832 can supply up to 1 A of DC/RMS or peak output current. The device operates on power supply voltages from 2.75 V to 6.8 V.
To maintain constant motor speed over varying battery voltages while maintaining long battery life, a PWM voltage regulation method is provided. An input pin allows programming of the regulated voltage. A built-in voltage reference output is also provided.
Internal protection functions are provided for overcurrent protection, short-circuit protection, undervoltage lockout, and overtemperature protection.
The DRV8832 also provides a current limit function to regulate the motor current during conditions like motor start-up or stall, as well as a fault output pin to signal a host processor of a fault condition.
The DRV8832 is available in a tiny 3-mm × 3-mm 10-pin VSON package and MSOP PowerPAD package (Eco-friendly: RoHS & no Sb/Br).
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8832 Low-Voltage Motor Driver IC datasheet (Rev. I) | PDF | HTML | 2014. 1. 10 | |
| 애플리케이션 노트 | Understanding Motor Driver Current Ratings (Rev. A) | PDF | HTML | 2024. 7. 5 | ||
| 애플리케이션 노트 | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021. 10. 14 | ||
| 애플리케이션 노트 | Calculating Power Dissipation for a H-Bridge or Half Bridge Driver (Rev. A) | PDF | HTML | 2021. 7. 22 | ||
| 애플리케이션 노트 | Methods to Configure Current Regulation for Brushed and Stepper Motors (Rev. B) | PDF | HTML | 2021. 1. 19 | ||
| 기술 문서 | Automating smart home systems with motor drivers | PDF | HTML | 2019. 10. 24 | ||
| 백서 | Remote Shut Off in Flow Meters is Instrumental for Smart Utility Deployment | 2018. 8. 10 | |||
| 애플리케이션 노트 | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018. 7. 6 | |||
| Application brief | PowerPAD™ Made Easy (Rev. B) | 2004. 5. 12 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8832EVM — DRV8832 평가 모듈
The DRV8832 evaluation module consists of a 1A, H-bridge motor driver with a parallel control interface and a small number of external components that can be used to drive one brushed DC motor or other loads like solenoids. With the DRV8832EVM, designers can quickly and easily evaluate the (...)
SLVC424 — Board Files: DRV8830 EVM and DRV8832 EVM
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HVSSOP (DGQ) | 10 | Ultra Librarian |
| VSON (DRC) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.