DRV8428
- PWM Microstepping Stepper Motor Driver
- Simple STEP/DIR Interface
- Up to 1/256 Microstepping Indexer
- Integrated Current Sense Functionality
- No Sense Resistors Required
- ±6% Full-Scale Current Accuracy
- Smart tune decay technology and mixed decay options
- 4.2-V to 33-V Operating Supply Voltage Range
- RDS(ON): 1500 mΩ HS + LS at 24 V, 25°C
- Current Capacity Per Bridge: 1.7-A peak, 1-A Full-Scale, 0.7-A rms
- Configurable Off-Time PWM Chopping
- 7-µs, 16-µs, or 32-µs.
- Supports 1.8-V, 3.3-V, 5.0-V Logic Inputs
- Low-Current Sleep Mode (2 µA)
- Spread spectrum clocking for low electromagnetic interference (EMI)
- Small Package and Footprint
- Protection Features
- VM Undervoltage Lockout (UVLO)
- Overcurrent Protection (OCP)
- Thermal Shutdown (OTSD)
- Fault Condition Output (EN/nFAULT)
The DRV8428 is a stepper motor driver for industrial and consumer applications. The device is fully integrated with two N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sensing. The DRV8428 is capable of driving up to 1-A full-scale output current (dependent on PCB design).
The DRV8428 uses an internal current sense architecture to eliminate the need for two external power sense resistors, saving PCB area and system cost. The device uses an internal PWM current regulation scheme selectable between smart tune, and mixed decay options. Smart tune automatically adjusts for optimal current regulation, compensates for motor variation and aging effects and reduces audible noise from the motor.
A simple STEP/DIR interface allows an external controller to manage the direction and step rate of the stepper motor. The device can be configured in different step modes ranging from full-step to 1/256 microstepping. A low-power sleep mode is provided for very low standby quiescent standby current using a dedicated nSLEEP pin. Protection features are provided for supply undervoltage, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the EN/nFAULT pin.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8428EVM — DRV8428 STEP/DIR 제어 인터페이스 스테퍼 모터 드라이버 보드
DRV8428 평가 모듈(EVM)을 사용하면 DRV8428 장치를 쉽게 평가할 수 있습니다.
DRV8428 장치는 양극 스테퍼 모터용 통합 모터를 위한 드라이버 솔루션입니다. 이 장치에는 2개의 N채널 전력 MOSFET H 브릿지, 통합 전류 감지 및 조정 회로, 마이크로스테핑 인덱서가 통합되어 있습니다. DRV8428 장치는 4.5~33V의 공급 전압으로 전력을 공급받을 수 있습니다. 간단한 STEP/DIR 제어 인터페이스를 통해 외부 컨트롤러가 출력을 관리할 수 있습니다. 감쇠 모드는 저속, 혼합 감쇠, 스마트 튜닝 리플 제어 (...)
SLOR127 — DRV8428xEVM Hardware Design File
TIDA-010950 — 전원 조정 및 홀 효과 위치 감지를 지원하는 댐퍼 및 EEV 컨트롤러 레퍼런스 설계
이 레퍼런스 설계는 댐퍼 액추에이터 및 전자 확장 밸브를 위한 듀얼 모터 드라이브 솔루션을 보여줍니다. 여러 모터 드라이브에는 15VDC 소스에서 작동하는 양극 스테퍼 모터 드라이버 1개, 브러시리스 DC 모터 드라이버 1개가 포함되어 있습니다. 이 설계는 IEC 60335-1에서 정의된 저전력 회로 인증을 손쉽게 수행할 수 있는 정확한 전력 제한을 보여줍니다. 이 레퍼런스 설계에서는 밸브 또는 댐퍼의 위치를 제어하기 위한 0~10V 및 4~20mA 제어 인터페이스와 정확한 위치 감지에 사용되는 TMAG5273을 통합합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (PWP) | 16 | Ultra Librarian |
| WQFN (RTE) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.