DRV8374-Q1
- 4.5V to 35V operating voltage (40V abs max)
- High output current capability: 40A Peak
- Low MOSFET on-state resistance
- 17mΩ RDS(ON) (HS + LS) at TA = 25°C
- Reduced switching loss with 850V/us slew rate and
reverse recovery loss minimization technique
- Adjustable slew rate options
- Low audible noise and ease of motor control with ultra-low dead time < 100ns, and propagation delay < 100ns
- Low power sleep mode
- 3.6µA typical at VVM = 24V, TA = 25°C
- Multiple control interface options
- 6x PWM control interface
- 3x PWM control interface
- Supports up to 200kHz PWM frequency
- Does not require external current sense resistors, built-in current sensing
- Flexible device configuration option
- DRV8374S-Q1: 5MHz 16-bit SPI for device configuration and fault status
- DRV8374H-Q1: Hardware pin based configuration
- Supports 1.8V, 3.3V, and 5V logic inputs
- Built-in 5V (5%), 30mA LDO regulator (Except for DRV8374G-Q1)
- Integrated protection features
- Supply under-voltage lockout (UVLO)
- Charge pump under-voltage (CPUV)
- Overcurrent protection (OCP)
- Thermal warning and shutdown (OTW/OTSD)
- Fault condition indication pin (nFAULT)
- Optional fault diagnostics over SPI
The DRV8374-Q1 provides a single-chip power stage device for customers driving 4.5V to 35V brushless-DC motors. The DRV8374 integrates three 1/2-H bridges with 40V absolute maximum capability and a very low RDS(ON) of 17mΩ (high-side plus low-side) to enable high power drive capability. Current is sensed using an integrated current sensing feature which eliminates the need for external sense resistors. Power management features with integrated LDO generate the necessary voltage rails for the device and can be used to power external circuits.
DRV8374-Q1 implements a 6x or 3x PWM control scheme which can be used to implement sensored or sensorless field-oriented control (FOC), sinusoidal control, or trapezoid control using an external microcontroler. The DRV8374 is capable of driving a PWM frequency up to 200kHz. The control scheme is highly configurable through hardware pins or register settings ranging from motor current limiting behavior to fault response.
There are a large number of protection features integrated into , intended to protect the device, motor, and system against fault events. Refer for design consideration and recommendation on device usage.
There are a large number of protection features integrated into DRV8374, intended to protect the device, motor, and system against fault events. Refer for design consideration and recommendation on device usage.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8374-Q1 Three-Phase Integrated FET Motor Driver datasheet | PDF | HTML | 2026. 8. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8376EVM — DRV8376 평가 모듈
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN-FCRLF (VEO) | 29 | Ultra Librarian |