DRV8316C-Q1
- AEC-Q100
qualified for automotive applications
- Temperature grade 1: –40°C ≤ TA ≤ 125°C
- Three-phase BLDC motor driver
- Cycle-by-cycle current limit to limit phase current
- Supports up to 200-kHz PWM frequency
- Active demagnetization to reduce power losses
- 4.5-V to 35-V operating voltage (40-V abs max)
- High output current capability: 8-A Peak
- Low MOSFET on-state resistance
- 95-mΩ (typ.) RDS(ON) (HS + LS) at TA = 25°C
- Low power sleep mode
- 2.5-µA (max.) at VVM = 13.5-V, TA = 25°C
- Multiple control
interface options
- 6x PWM control interface
- 3x PWM control interface
- 6x PWM control interface with cycle by cycle current limit
- 3x PWM control interface with cycle by cycle current limit
- Does not require external current sense resistors, built-in current sensing
- Flexible device configuration options
- DRV8316CR-Q1: 5-MHz 16-bit SPI interface for device configuration and fault status
- DRV8316CT-Q1: Hardware pin based configuration
- Supports 1.8-V, 3.3-V, and 5-V logic inputs
- Built-in 3.3-V/5-V, 200-mA buck regulator
- Built-in 3.3-V, 30-mA LDO regulator
- Delay compensation reduces duty cycle distortion
- Suite of integrated protection features
- Supply undervoltage lockout (UVLO)
- Charge pump undervoltage (CPUV)
- Overcurrent protection (OCP)
- Thermal warning and shutdown (OTW/OTSD)
- Fault condition indication pin (nFAULT)
- Optional fault diagnostics over SPI interface
DRV8316C-Q1 integrates three H-bridges with 40-V absolute maximum capability and a very low RDS(ON) of 95 mΩ (high-side + low-side) to enable high power drive capability for 12-V automotive brushless-DC motors. DRV8316C-Q1 provides integrated current sensing which eliminates the need for external sense resistors. DRV8316C-Q1 integrates power management circuits including an voltage-adjustable buck regulator (3.3-V / 5-V, 200-mA) and LDO (3.3-V / 30-mA) that can be used to power external circuits.
DRV8316C-Q1 provides a configurable 6x or 3x PWM control scheme which can be used to implement sensored or sensorless field-oriented control (FOC), sinusoidal control, or trapezoid control using an external microcontroller. DRV8316C-Q1 is capable of driving a PWM frequency of up to 200 kHz. DRV8316C-Q1 is highly configurable either through SPI (DRV8316CR -Q1) or pins (DRV8316CT -Q1) - PWM mode. slew rate, OCP level, current sense gain are some of the configurable features.
A number of protection features including supply undervoltage lockout (UVLO), overvoltage protection (OVP), charge pump undervoltage (CPUV), overcurrent protection (OCP), over-temperature warning (OTW) and over-temperature shutdown (OTSD) are integrated into DRV8316C-Q1 to protect the device, motor, and system against fault events. Fault conditions are indicated by the nFAULT pin.
Refer Application Information for design consideration and recommendation on device usage.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8316C-Q1 Automotive Three-Phase Integrated FET Motor Driver datasheet | PDF | HTML | 2023. 2. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DRV8316REVM — DRV8316R 3상 PWM 모터 드라이버 평가 모듈
DRV8316REVM은 12V/24V DC 레일 또는 배터리 전원 애플리케이션용 8A 피크 전류 드라이브를 지원하는 3상 BLDC(브러시리스 DC) 모터를 구동하기 위한 3개의 하프 H 브리지 통합 MOSFET 드라이버를 제공합니다.
이 장치는 BLDC 모터의 3상 전류를 감지하는 통합 전류 감지와 3개의 전류 감지 증폭기(CSA)를 통합하여 최적의 FOC 및 전류 제어 시스템 구현을 달성합니다.
런치패드 연결을 사용하면 DRV8316에 대한 개인용 펌웨어 개발 플랫폼을 사용할 수 있습니다. 여기에는 (...)
MSP-MOTOR-CONTROL — MSPM0 Firmware solutions for motor control applications
MSP 모터 제어는 MSPM0 Arm® Cortex® M0+ MCU 및 인기 있는 모터 드라이버 솔루션으로 30분 이내에 모터를 구동하는 소프트웨어, 툴 및 예제 모음입니다.
MSP 모터 제어는 성능, 통합 및 사용 편의성에 최적화된 센서드 및 센서리스 제어 알고리즘을 사용하여 브러시드, 스테퍼 및 3상 모터를 구동하는 지원되는 하드웨어 키트에 대한 예제를 제공합니다. 지금 하드웨어를 주문하고, 모터를 연결하고, 당사의 그래픽 사용자 인터페이스나 온라인 코드 예제를 사용하여 모터를 회전시켜 보십시오.
STK-3P-STK1000 — STK-3P-STK1000 키트와 MSPM0G35xx를 사용하는 애플리케이션 예제
STK-3P-STK1000 애플리케이션 솔루션 TI MSPM0G3519 고성능 MCU 및 DRV8316 모터 드라이버를 기반으로 차량용 애플리케이션을 위해 설계되었으며, 가볍고 안정적인 CAN/LIN 프로토콜 스택을 통합하여 최소한의 리소스 소비로 효율적인 차량 내 네트워크 통신을 달성합니다. 또한 이 소프트웨어에는 고효율, 저잡음 정밀 모터 제어를 제공하는 FOC(자속 기준 제어) 기반 모터 드라이브 알고리즘이 포함되어 있습니다. A/B 파티션 펌웨어 관리를 특징으로 하는 이 플랫폼은 안전한 OTA(over-the-air) (...)
BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGF) | 40 | Ultra Librarian |