DRV8303
- 6-V to 60-V Operating Supply Voltage Range
- 1.7-A Source and 2.3-A Sink Gate Drive Current Capability
- Slew Rate Control for EMI Reduction
- Bootstrap Gate Driver With 100% Duty Cycle Support
- 6 or 3 PWM Input Modes
- Dual Integrated Current-Shunt Amplifiers With Adjustable Gain and Offset
- 3.3-V and 5-V Interface Support
- Serial Peripheral Interface (SPI)
- Protection Features:
- Programmable Dead Time Control (DTC)
- Programmable Overcurrent Protection (OCP)
- PVDD and GVDD Undervoltage Lockout (UVLO)
- GVDD Overvoltage Lockout (OVLO)
- Overtemperature Warning/Shutdown (OTW/OTS)
- Reported through nFAULT, nOCTW, and SPI Registers
All trademarks are the property of their respective owners.
The DRV8303 is a gate driver IC for three-phase motor-drive applications. The device provides three half bridge drivers, each capable of driving two N-channel MOSFETs. The device supports up to 1.7-A source and 2.3-A peak current capability. The DRV8303 can operate off of a single power supply with a wide range from 6-V to 60-V. It uses a bootstrap gate-driver architecture with trickle charge circuitry to support 100% duty cycle. The DRV8303 uses automatic hand shaking when the high-side or low-side MOSFET is switching to prevent current shoot through. Integrated VDS sensing of the high-side and low-side MOSFETs is used to protect the external power stage against overcurrent conditions.
The DRV8303 includes two current-shunt amplifiers for accurate current measurement. The amplifiers support bi-directional current sensing and provide and adjustable output offset up to 3 V.
The serial peripheral interface (SPI) provides detailed fault reporting and flexible parameter settings such as gain options for the current-shunt amplifiers and slew-rate control of the gate drivers.
For all available packages, see the orderable addendum at the end of the data sheet.관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DRV8303 Three-Phase Gate Driver With Dual-Current Shunt Amplifiers datasheet (Rev. C) | PDF | HTML | 2016. 12. 8 | |
| 애플리케이션 노트 | Best Practices for Board Layout of Motor Drivers (Rev. B) | PDF | HTML | 2021. 10. 14 | ||
| 애플리케이션 노트 | Hardware Design Considerations for an Electric Bicycle using BLDC Motor (Rev. B) | 2021. 6. 23 | |||
| 애플리케이션 노트 | System Design Considerations for High-Power Motor Driver Applications | PDF | HTML | 2021. 6. 22 | ||
| 백서 | Power Electronics in Motor Drives: Where is it? (Rev. A) | 2019. 10. 1 | |||
| 애플리케이션 노트 | Hardware Design Considerations for an Efficient Vacuum Cleaner Using a BLDC Moto (Rev. B) | PDF | HTML | 2019. 3. 6 | ||
| 기술 문서 | What happens when low-voltage BLDC motors drive appliance subsystems | PDF | HTML | 2016. 3. 17 | ||
| 애플리케이션 노트 | Sensored 3-Phase BLDC Motor Control Using MSP430 | 2011. 7. 20 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-DRV8301 — DRV8301 및 NexFET™ MOSFET을 지원하는 모터 드라이브 부스터팩
The BOOSTXL-DRV8301 is 10A, 3-phase brushless DC drive stage based on the DRV8301 pre-driver and CSD18533Q5A NexFET™ power MOSFET. The module has 3x low side current sense amps (2 internal to DRV8301, 1 external). The module also has a 1.5A step down buck converter, is fully protected with (...)
DRV8303EVM — DRV8303EVM - 듀얼 전류 션트 증폭기를 지원하는 3상 프리드라이버를 위한 평가 모듈
The three-phase brushless motor pre-driver DRV8303 can drive brushless DC and brushless AC (BLAC) - often referred to as permanent magnet synchronous (PSMS) - motors with examples of both sensorless Field Oriented / Vector Control (FOC) and TI's InstaSPIN-BLDC sensorless BLDC solution.
The (...)
TIDA-00436 — 응답 시간이 <1us인 스톨 전류 제한이 있는 36V/1kW 브러시리스 DC 모터 드라이브 레퍼런스 디자인
This reference design is a power stage for brushless motors in battery-powered garden and power tools rated up to 1 kW, operating from a 10-cell lithium-ion battery with a voltage range from 36 to 42 V. The design uses 60V, N-channel NexFETsTM featuring a very low drain-to-source resistance (RDS_ON (...)
TIDA-00447 — 24V, 100W/30W 듀얼 무센서 브러시리스 DC 모터 드라이브 레퍼런스 설계
TIDA-00447 is a 24V, dual Brushless DC (BLDC) motor drive reference design to be used in major home appliances to drive low voltage BLDC motors such as pumps and fans, e.g. for circulation pump and drain pump of dishwashers. The power stages of motor drive are designed for 100W and 30W of (...)
TIDA-00735 — 브러시리스 DC 프로펠러 컨트롤러 레퍼런스 디자인
TIDA-00735 레퍼런스 설계는 고전력 프로펠러, 팬 및 펌프 애플리케이션을 위한 10.8~25.2V의 브러시리스 DC 모터 컨트롤러입니다. 텍사스 인스트루먼트의 DRV8303 브러시리스 DC 모터 게이트 드라이버, CSD17573Q5B 30V NexFET™ 전원 MOSFET, MSP430 16비트 저전력 MCU, TPS70933 30V 초저전력 IQ LDO를 사용합니다. 사다리꼴 센서리스 제어 알고리즘을 통해 모터를 제어하며 중앙 컨트롤러의 외부 레퍼런스 신호를 통해 모터 속도를 명령합니다. 이 설계는 고효율 고전력 BLDC (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTSSOP (DCA) | 48 | Ultra Librarian |