DRV2665

활성

피에조용 햅틱 드라이버(105V 부스트 컨버터 및 DAC 통합)

지금 주문하기

데이터 시트

document-pdfAcrobat DRV2665 Piezo Haptic Driver with Integrated Boost Converter and Digital Front End datasheet (Rev. C) (영어) PDF | HTML

DRV2665

활성

데이터 시트

지금 주문하기

제품 상세 정보

Features

Adjustable current limit, Waveform generation

Haptic actuator type

Piezo

Input signal

Analog, I2C, PWM

Output voltage (max) (V)

200

Shutdown current (ISD) (µA)

10

Boost voltage (max) (V)

105

Vs (max) (V)

5.5

Vs (min) (V)

3

Operating temperature range (°C)

-40 to 70

Rating

Catalog

Features

Adjustable current limit, Waveform generation

Haptic actuator type

Piezo

Input signal

Analog, I2C, PWM

Output voltage (max) (V)

200

Shutdown current (ISD) (µA)

10

Boost voltage (max) (V)

105

Vs (max) (V)

5.5

Vs (min) (V)

3

Operating temperature range (°C)

-40 to 70

Rating

Catalog

VQFN (RGP)

20

16 mm² (4 mm × 4 mm)

Integrated Digital Front End
- Up to 400-kHz I 2C Bus Control
- 100-Byte Internal FIFO Interface
- Immersion TS5000-Compliant
- Optional Analog Inputs
High Voltage Piezo-Haptic Driver
- Drives up to 100 nF at 200 V PP and 300 Hz
- Drives up to 150 nF at 150 V PP and 300 Hz
- Drives up to 330 nF at 100 V PP and 300 Hz
- Drives up to 680 nF at 50 V PP and 300 Hz
- Differential Output
105-V Integrated Boost Converter
- Adjustable Boost Voltage
- Adjustable Boost Current Limit
- Integrated Power FET and Diode
- No Transformer Required
2-ms Fast Start Up Time
3.3- to 5.5-V Wide Supply Voltage Range
1.8-V Compatible, V DD Tolerant Digital Pins

Integrated Digital Front End
- Up to 400-kHz I 2C Bus Control
- 100-Byte Internal FIFO Interface
- Immersion TS5000-Compliant
- Optional Analog Inputs
High Voltage Piezo-Haptic Driver
- Drives up to 100 nF at 200 V PP and 300 Hz
- Drives up to 150 nF at 150 V PP and 300 Hz
- Drives up to 330 nF at 100 V PP and 300 Hz
- Drives up to 680 nF at 50 V PP and 300 Hz
- Differential Output
105-V Integrated Boost Converter
- Adjustable Boost Voltage
- Adjustable Boost Current Limit
- Integrated Power FET and Diode
- No Transformer Required
2-ms Fast Start Up Time
3.3- to 5.5-V Wide Supply Voltage Range
1.8-V Compatible, V DD Tolerant Digital Pins

The DRV2665 device is a piezo haptic driver with integrated 105-V boost switch, integrated power diode, integrated fully-differential amplifier, and integrated digital front end. This versatile device is capable of driving both high-voltage and low-voltage piezo haptic actuators. The input signal can be driven as haptic packets over the I 2C port or through the analog inputs.

The digital interface of the DRV2665 device is available through an I 2C compatible bus. A digital interface relieves the costly processor burden of the PWM generation or additional analog channel requirements in the host system. Any writes to the internal first-in, first-out buffer (FIFO) will automatically wake up the device and begin playing the waveform after the 2 ms internal start-up procedure. When the data flow stops or the FIFO under-runs, the DRV2665 device will automatically enter a pop-less shutdown procedure.

The boost voltage is set using two external resistors, and the boost current limit is programmable through the R EXT resistor. A typical start-up time of 2 ms makes the DRV2665 device an ideal piezo driver for fast haptic responses. Thermal overload protection prevents the device from being damaged when overdriven.

The DRV2665 device is a piezo haptic driver with integrated 105-V boost switch, integrated power diode, integrated fully-differential amplifier, and integrated digital front end. This versatile device is capable of driving both high-voltage and low-voltage piezo haptic actuators. The input signal can be driven as haptic packets over the I 2C port or through the analog inputs.

The digital interface of the DRV2665 device is available through an I 2C compatible bus. A digital interface relieves the costly processor burden of the PWM generation or additional analog channel requirements in the host system. Any writes to the internal first-in, first-out buffer (FIFO) will automatically wake up the device and begin playing the waveform after the 2 ms internal start-up procedure. When the data flow stops or the FIFO under-runs, the DRV2665 device will automatically enter a pop-less shutdown procedure.

The boost voltage is set using two external resistors, and the boost current limit is programmable through the R EXT resistor. A typical start-up time of 2 ms makes the DRV2665 device an ideal piezo driver for fast haptic responses. Thermal overload protection prevents the device from being damaged when overdriven.

filter

기타 피에조 드라이버 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

6개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	데이터 시트	DRV2665 Piezo Haptic Driver with Integrated Boost Converter and Digital Front End datasheet (Rev. C)	PDF \| HTML	2022. 10. 18
	애플리케이션 노트	DRV8662, DRV2700, DRV2665, and DRV2667 Configuration Guide (Rev. A)	PDF \| HTML	2021. 12. 8
	애플리케이션 노트	Piezo Haptics With Integrated Waveforms: DRV2605L-Q1 and DRV2700		2017. 9. 27
	Product overview	Automotive Haptics Solutions		2013. 9. 16
	Product overview	Haptics: Touch feedback that really moves you (Rev. A)		2013. 1. 8
	아날로그 디자인 학술지	High-definition haptics: Feel the difference!		2012. 7. 17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

드라이버 또는 라이브러리

DRV2665SW-LINUX — DRV2665용 Linux 드라이버

The Linux driver supports the DRV2665 haptic motor driver. The Linux driver supports communication through the I2C bus and interfaces with the input sub-system for a forced feedback response.