DP83TC814S-Q1
- Open Alliance and IEEE 802.3bw 100BASE-T1
compliant
- Passes Level IV emissions with Integrated LPF
- SAE J2962-3 EMC compliant
- Configurable I/O voltages: 3.3V, 2.5V, and 1.8V
- MAC interfaces: MII, RMII, RGMII and SGMII
- Optional separate voltage rail for MAC interface pins (3.3V, 2.5V, 1.8V)
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C ambient operating temperature
- ±8kV HBM ESD for pins 12 and 13
- IEC61000-4-2 ESD classification level 4 for pins 12 and 13: ±8kV contact discharge
- IEEE 1588 SFD support
- TSN compliant with 802.3br frame pre-emption support
- Low active power operation: < 230mW
- Diagnostic toolkit
- Signal quality indication (SQI)
- Time domain reflectometry (TDR)
- Electrostatic discharge sensor
- Voltage sensor
- PRBS Built-in Self-Test
- Loopbacks
- VQFN, wettable flank packaging
- Functional Safety-Capable
This device includes the Diagnostic Tool Kit, providing an extensive list of real-time monitoring tools, debug tools, and test modes. Within the toolkit is the first integrated electrostatic discharge (ESD) monitoring tool. The device can count ESD events on MDI as well as providing real-time monitoring through the use of a programmable interrupt. Additionally, the DP83TC814S-Q1includes a pseudo-random binary sequence (PRBS) frame generation tool, which is fully compatible with internal loopbacks, to transmit and receive data without the use of a MAC. The device is housed in a 6.00mm × 6.00mm, 36 pin VQFN wettable flank package. This device is pin-2-pin compatible with DP83TG720 (1000BASE-T1) and is also form factor compatible with DP83TC811. This means a PCB layout is useable for DP83TC811, DP83TC812, DP83TC814, and DP83TG720.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
비교 대상 장치와 유사한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DP83TC814x-Q1 100BASE-T1 Automotive Ethernet PHY datasheet (Rev. B) | PDF | HTML | 2026. 6. 17 | |
| 애플리케이션 노트 | DP83TC812, DP83TC813, and DP83TC814: Configuring for Open Alliance Specification Compliance (Rev. G) | PDF | HTML | 2025. 12. 11 | ||
| 애플리케이션 노트 | SGMII Troubleshooting Guide | PDF | HTML | 2024. 11. 5 | ||
| 애플리케이션 노트 | Basic Ethernet Interface Debug With Linux | PDF | HTML | 2024. 10. 11 | ||
| 애플리케이션 노트 | How to Integrate Linux Driver Into Your System | PDF | HTML | 2024. 7. 12 | ||
| 기능 안전 정보 | DP83TC814 FS FIT Rate, Failure Mode Distribution and Pin FMA | PDF | HTML | 2022. 12. 7 | ||
| 애플리케이션 노트 | DP83TC811, DP83TC812, DP83TC814, DP83TG720 Hardware Rollover Document | PDF | HTML | 2020. 1. 10 | ||
| 기술 문서 | Gigabit xMII for 100BASE-T1: why are RGMII & SGMII important for 100 Mbps PHYs? | PDF | HTML | 2018. 5. 15 | ||
| 기술 문서 | The importance of automotive Ethernet standards | PDF | HTML | 2018. 5. 2 | ||
| 백서 | 100BASE-T1 Ethernet: the evolution of automotive networking | 2018. 4. 24 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP83TC812EVM-MC — 100Mbs 미디어 컨버터용 DP83TC812 평가 모듈
비트 오류율 테스트 및 상호 운용성 테스트를 활성화하는 미디어 컨버터입니다. USB2MDIO 그래픽 사용자
인터페이스 도구에 사용하는 온보드 MSP430F5529가 있습니다. DP83867은 RGMII MAC 인터페이스를
사용한 구리(100BASE-TX) 지원용으로 제공됩니다.
ETHERNET-SW — 이더넷 PHY 드라이버 및 툴
텍사스 인스트루먼트의 이더넷 물리적 계층(PHY) 트랜시버용 드라이버는 직렬 관리 인터페이스(MDC/MDIO)를 통한 통신을 지원하여 PHY 레지스터를 구성하고 읽습니다. Linux 및 RTOS 드라이버는 github에서 찾을 수 있습니다.
USB-2-MDIO — USB-2-MDIO Tool v1.0
USB-2-MDIO 소프트웨어 툴을 사용하면 텍사스 인스트루먼트의 이더넷 PHY가 MDIO 상태 및 장치 제어 레지스터에 액세스할 수 있습니다. USB-2-MDIO 툴에는 경량 GUI로 인터페이싱하는 TI의 MSP430 ™ MCU용 LaunchPad™ 개발 키트가 포함되어 있습니다. LaunchPad 개발 키트는 버스에 연결된 PHY의 레지스터를 조작할 수 있는 MDIO 버스 컨트롤러를 구현합니다.
DP83TC814-SCHEMATIC-REVIEW-CHECKLIST — DP83TC814 Schematic Review Checklist
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHA) | 36 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.