DP83826AI
- Low and deterministic latency
- TX latency: 40ns, RX latency: 170ns
- Deterministic latency over power cycles < ±2ns
- Fixed phase XI to TX_CLK relationship < ±2ns
- Robust and small system implementation
- Integrated circuitry for enhanced EMC
- IEC 61000-4-2 ESD: ±8kV contact, ±15kV air Criteria A
- IEC 61000-4-4 EFT: ±4kV at 5kHz,100kHz Criteria A
- CISPR 22 conducted emissions Class B
- CISPR 22 radiated emissions Class B
- Fast link-drop < 10µs
- Cable reach > 150 meters
- Voltage mode line driver
- Integrated terminations on MAC interface
- Voltage tolerance: ±10%
- Two selectable pin modes in single device
- ENHANCED mode for additional features
- BASIC mode for common Ethernet pinout
- Low power consumption < 160mW
- MAC interfaces: MII, RMII
- Programmable energy-saving modes
- Active sleep
- Deep power down
- Energy Efficient Ethernet (EEE) IEEE 802.3az
- Wake-on-LAN (WoL)
- Diagnostic tools: cable diagnostics, built-in self-test (BIST), loopback modes
- Single, 3.3V power supply
- I/O voltages: 1.8V or 3.3V
- RMII back-to-back repeater mode
- DP83826AE operating temperature range: –40°C to 105°C
- DP83826AI operating temperature range: –40°C to 85°C
- IEEE 802.3 compliant: 10BASE-Te, 100BASE-TX
- EtherCAT compliant
The DP83826Ax offers low and deterministic latency, low power and supports 10BASE-Te, 100BASE-TX Ethernet protocols to meet stringent requirements in real-time industrial Ethernet systems. The device includes hardware bootstraps to achieve fast link-up time, fast link-drop detection modes and dedicated reference CLKOUT to clock synchronize other modules on the systems.
The two configurable modes are BASIC standard Ethernet mode that uses a common Ethernet pinout, and ENHANCED Ethernet mode which supports standard Ethernet mode and multiple industrial Ethernet fieldbus applications with the additional features and hardware bootstraps configuration.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DP83826Ax Deterministic, Low-Latency, Low-Power, 10/100 Mbps, Industrial Ethernet PHY datasheet (Rev. A) | PDF | HTML | 2025. 10. 27 | |
| 애플리케이션 노트 | DP83826 to DP83826A Hardware Rollover Document (Rev. A) | PDF | HTML | 2026. 3. 5 | ||
| 애플리케이션 노트 | DP83826A Troubleshooting Guide | PDF | HTML | 2025. 8. 14 | ||
| 애플리케이션 노트 | KSZ8081 to DP83826A System Rollover | PDF | HTML | 2025. 4. 8 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DP83826AEVM — DP83826A 평가 모듈
TIDA-010973 — 다중 프로토콜용 100Mbps 산업용 이더넷 통신 모듈 레퍼런스 설계
이 레퍼런스 설계는 다중 프로토콜 100Mbps 산업용 이더넷 노드 개발을 가속합니다. 이 설계는 통합 산업용 통신 서브시스템(ICSS)이 포함된 AM261x에서 EtherCAT®, PROFINET®, EtherNet/IP, Modbus® TCP를 신속히 프로토타입화하고 배포할 수 있도록 합니다. 이 방식은 하드웨어 스핀을 줄이고 클로킹과 전력을 단순화하며 결정적이고 시간 동기화된 공장 자동화 성능을 제공합니다.
TIDA-010979 — 산업용 통신을 지원하는 48V 1kW 로봇 관절 모터 컨트롤 레퍼런스 설계
이 레퍼런스 설계는 산업용 이더넷 연결 모터 드라이버를 제어하는 TI Sitara™ MCU- AM261x 장치를 특징으로 합니다. 이 설계는 직경 70mm PCB(인쇄 회로 보드)를 사용하여 휴머노이드 로봇 관절(48V, 1kW Eyoubot 모터)을 구동합니다. 이 설계는 소형 폼 팩터와 단순화된 통합 플랫폼을 보여줍니다. 이 플랫폼에는 세 개의 DRV7167 하프 브리지 GaN 모터 드라이브 전력 단계를 사용하는 고전력 밀도 섹션, AM2612 500MHz R5F 코어 MCU 및 AMC0106 기능 절연 델타-시그마 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.