DAC8164
- Relative Accuracy: 1LSB
- Glitch Energy: 0.15nV-s
- Internal Reference:
- 2.5V Reference Voltage (enabled by default)
- 0.004% Initial Accuracy (typ)
- 2ppm/°C Temperature Drift (typ)
- 5ppm/°C Temperature Drift (max)
- 20mA Sink/Source Capability
- Power-On Reset to Zero-Scale
- Ultra-Low Power Operation: 1mA at 5V
- Wide Power Supply Range: +2.7V to +5.5V
- 14-Bit Monotonic Over Temperature Range
- Settling Time: 10µs to ±0.006% Full-Scale Range (FSR)
- Low-Power Serial Interface with Schmitt-Triggered Inputs: Up to 50MHz
- On-Chip Output Buffer Amplifier with Rail-to-Rail Operation
- 1.8V to 5.5V Logic Compatibility
- Temperature Range: –40°C to +105°C
- APPLICATIONS
- Portable Instrumentation
- Closed-Loop Servo-Control
- Process Control, PLCs
- Data Acquisition Systems
- Programmable Attenuation
- PC Peripherals
All other trademarks are the property of their respective owners
The DAC8164 is a low-power, voltage-output, four-channel, 14-bit digital-to-analog converter (DAC). The device includes a 2.5V, 2ppm/°C internal reference (enabled by default), giving a full-scale output voltage range of 2.5V. The internal reference has an initial accuracy of 0.004% and can source up to 20mA at the VREFH/VREFOUT pin. The device is monotonic, provides very good linearity, and minimizes undesired code-to-code transient voltages (glitch). The DAC8164 uses a versatile 3-wire serial interface that operates at clock rates up to 50MHz. The interface is compatible with standard SPI, QSPI, Microwire, and digital signal processor (DSP) interfaces.
The DAC8164 incorporates a power-on-reset circuit that ensures the DAC output powers up at zero-scale and remains there until a valid code is written to the device. The device contains a power-down feature, accessed over the serial interface, that reduces the current consumption of the device to 1.3µA at 5V. Power consumption is 2.6mW at 3V, reducing to 1.4µW in power-down mode. The low power consumption, internal reference, and small footprint make this device ideal for portable, battery-operated equipment.
The DAC8164 is drop-in and functionally compatible with the DAC7564 and DAC8564, and functionally compatible with the DAC7565, DAC8165 and DAC8565. All these devices are available in a TSSOP-16 package.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | 14-Bit, Quad, Ultra Low Glitch, Voltage Output DAC w/2.5V, 2ppm/°C Int Ref datasheet (Rev. B) | 2011. 5. 9 | ||
| 사용 설명서 | DAC8164/65 Evaluation Module | 2008. 8. 26 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DAC8564EVM — DAC8564 평가 모듈
이 EVM은 DAC8564 디지털-아날로그 컨버터(DAC)를 탑재합니다. DAC8564/65EVM은 기본적으로 활성화되는 내장 2.5V 내부 레퍼런스를 갖춘 16비트 고해상도 쿼드 채널 직렬 입력 DAC의 기능 및 성능을 빠르고 쉽게 평가할 수 있도록 설계된 간단한 평가 모듈입니다. 이 EVM은 모든 호스트 마이크로프로세서 또는 TI DSP 기반 시스템과 통신할 수 있는 직렬 인터페이스를 탑재합니다.
DAC8565EVM — DAC8565 평가 모듈
이 EVM은 DAC8565 디지털-아날로그 컨버터(DAC)를 탑재합니다. DAC8564/65EVM은 기본적으로 활성화되는 내장 2.5V 내부 레퍼런스를 갖춘 16비트 고해상도 쿼드 채널 직렬 입력 DAC의 기능 및 성능을 빠르고 쉽게 평가할 수 있도록 설계된 간단한 평가 모듈입니다. 이 EVM은 모든 호스트 마이크로프로세서 또는 TI DSP 기반 시스템과 통신할 수 있는 직렬 인터페이스를 탑재합니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 16 | Ultra Librarian |