DAC7718
- Bipolar Output: ±2V to ±16.5V
- Unipolar Output: 0V to +33V
- 12-Bit Resolution
- Low Power: 14.4mW/Ch (Bipolar Supply)
- Relative Accuracy: 1 LSB Max
- Low Zero/Full-Scale Error: ±1 LSB Max
- Flexible System Calibration
- Low Glitch: 4nV-s
- Settling Time: 15µs
- Channel Monitor Output
- Programmable Gain: x4/x6
- Programmable Offset
- SPI: Up to 50MHz, 1.8V/3V/5V Logic
- Schmitt Trigger Inputs
- Daisy-Chain with Sleep Mode Enhancement
- Packages: QFN-48 (7x7mm), TQFP-64 (10x10mm)
- APPLICATIONS
- Automatic Test Equipment
- PLC and Industrial Process Control
- Communications
The DAC7718 is a low-power, octal, 12-bit digital-to-analog converter (DAC). With a 5V reference, the output can either be a bipolar ±15V voltage when operating from dual ±15.5V (or higher) power supplies, or a unipolar 0V to +30V voltage when operating from a +30.5V (or higher) power supply. With a 5.5V reference, the output can either be a bipolar ±16.5V voltage when operating from dual ±17V (or higher) power supplies, or a unipolar 0V to +33V voltage when operating from a +33.5V (or higher) power supply. This DAC provides low-power operation, good linearity, and low glitch over the specified temperature range of –40°C to +105°C. This device is trimmed in manufacturing and has very low zero-code and gain error. In addition, system level calibration can be performed over the entire signal chain. The output range can be offset by using the DAC offset register.
The DAC7718 features a standard, high-speed serial peripheral interface (SPI) that operates at up to 50MHz and is 1.8V, 3V, and 5V logic compatible, to communicate with a DSP or microprocessor. The input data of the device are double-buffered. An asynchronous load input (LDAC) transfers data from the DAC data register to the DAC latch. The asynchronous CLR input sets the output of all eight DACs to AGND. The VMON pin is a monitor output that connects to the individual analog outputs, the offset DAC, the reference buffer outputs, and two external inputs through a multiplexer (mux).
The DAC7718 is pin-to-pin and function-compatible with the DAC8718 (16-bit) and the DAC8218 (14-bit).
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | Octal, 12-Bit, Low-Power, High-Voltage Output, Serial Input D/A Converter datasheet (Rev. A) | 2009. 12. 15 | ||
| 아날로그 디자인 학술지 | Isolated RS-485 transceivers support DMX512 stage lighting & special-effects app | 2011. 9. 16 | |||
| 아날로그 디자인 학술지 | 3Q 2011 Issue Analog Applications Journal | 2011. 9. 16 | |||
| 아날로그 디자인 학술지 | The IBIS model, Part 2: Determining the total quality of an IBIS model | 2011. 3. 14 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DAC7718EVM — DAC7718 평가 모듈
DACxx18EVM은 DAC7718, DAC8218 또는 DAC8718 디지털-아날로그 컨버터를 탑재합니다. 이 EVM은 고해상도 직렬 입력 디지털-아날로그 컨버터(DAC)의 기능 및 성능을 빠르고 쉽게 평가할 수 있는 방법을 제공합니다. DACxx18EVM은 기본적으로 양극 출력 범위로 작동하도록 설계되었으나, 두 개의 점퍼를 적절히 구성하면 단극 출력 범위로 구성할 수 있습니다. 이 EVM은 모든 호스트 마이크로프로세서 또는 TI DSP 기반 시스템에 쉽게 연결할 수 있는 직렬 인터페이스 헤더를 제공합니다. 설치된 +5VDC (...)
DAC8718EVM — DAC8718 평가 모듈
DACxx18EVM은 DAC7718, DAC8218 또는 DAC8718 디지털-아날로그 컨버터를 탑재합니다. 이 EVM은 고해상도 직렬 입력 디지털-아날로그 컨버터(DAC)의 기능 및 성능을 빠르고 쉽게 평가할 수 있는 방법을 제공합니다. DACxx18EVM은 기본적으로 양극 출력 범위로 작동하도록 설계되었으나, 두 개의 점퍼를 적절히 구성하면 단극 출력 범위로 구성할 수 있습니다. 이 EVM은 모든 호스트 마이크로프로세서 또는 TI DSP 기반 시스템에 쉽게 연결할 수 있는 직렬 인터페이스 헤더를 제공합니다. 설치된 +5VDC (...)
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
| TQFP (PAG) | 64 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.