CD74HC4051-Q1

활성

차량용, 5V, 8:1, 1채널 아날로그 멀티플렉서

CD74HC4051-Q1

활성

제품 상세 정보

Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 1.8, 2.5, 3.3, 5 Power supply voltage - dual (V) +/-2.5, +/-5 Protocols Analog Ron (typ) (Ω) 40 CON (typ) (pF) 25 ON-state leakage current (max) (µA) 2 Supply current (typ) (µA) 16 Bandwidth (MHz) 180 Operating temperature range (°C) -40 to 125 Features Break-before-make Input/output continuous current (max) (A) 0.025 Rating Automotive Drain supply voltage (max) (V) 6 Negative rail supply voltage (max) (V) 0
Configuration 8:1 Number of channels 1 Power supply voltage - single (V) 1.8, 2.5, 3.3, 5 Power supply voltage - dual (V) +/-2.5, +/-5 Protocols Analog Ron (typ) (Ω) 40 CON (typ) (pF) 25 ON-state leakage current (max) (µA) 2 Supply current (typ) (µA) 16 Bandwidth (MHz) 180 Operating temperature range (°C) -40 to 125 Features Break-before-make Input/output continuous current (max) (A) 0.025 Rating Automotive Drain supply voltage (max) (V) 6 Negative rail supply voltage (max) (V) 0
SOIC (D) 16 59.4 mm² (9.9 mm × 6 mm) TSSOP (PW) 16 32 mm² (5 mm × 6.4 mm)
  • Qualified for automotive applications
  • Wide analog input voltage range of ± 5V maximum
  • Low ON resistance:
    • 70Ω typical (V CC − V EE = 4.5V)
    • 40Ω typical (V CC − V EE = 9V)
  • Low crosstalk between switches
  • Fast switching and propagation speeds
  • Break-before-make switching
  • Operation control voltage = 2V to 6V
  • Switch voltage = 0V to 10V
  • High noise immunity N IL = 30%, N IH = 30% of V CC , V CC = 5V
  • Qualified for automotive applications
  • Wide analog input voltage range of ± 5V maximum
  • Low ON resistance:
    • 70Ω typical (V CC − V EE = 4.5V)
    • 40Ω typical (V CC − V EE = 9V)
  • Low crosstalk between switches
  • Fast switching and propagation speeds
  • Break-before-make switching
  • Operation control voltage = 2V to 6V
  • Switch voltage = 0V to 10V
  • High noise immunity N IL = 30%, N IH = 30% of V CC , V CC = 5V

This device is a digitally controlled analog switch that utilizes silicon-gate CMOS technology to achieve operating speeds similar to LSTTL, with the low power consumption of standard CMOS integrated circuits.

This analog multiplexer/demultiplexer controls analog voltages that may vary across the voltage supply range (for example, VCC to VEE). These bidirectional switches allow any analog input to be used as an output and vice versa. The switches have low ON resistance and low OFF leakages. In addition, the device has an enable control (E) that, when high, disables all switches to their OFF state.

This device is a digitally controlled analog switch that utilizes silicon-gate CMOS technology to achieve operating speeds similar to LSTTL, with the low power consumption of standard CMOS integrated circuits.

This analog multiplexer/demultiplexer controls analog voltages that may vary across the voltage supply range (for example, VCC to VEE). These bidirectional switches allow any analog input to be used as an output and vice versa. The switches have low ON resistance and low OFF leakages. In addition, the device has an enable control (E) that, when high, disables all switches to their OFF state.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
TMUX1308-Q1 활성 차량용, 5V, 8:1, 1채널, 아날로그 멀티플렉서, 주입 전류 제어, 1.8V 로직 Upgraded 1.8-V logic support and smaller package options

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
5개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 CD74HC4051-Q1 Automotive Analog Multiplexer or Demultiplexer datasheet (Rev. B) PDF | HTML 2024. 4. 9
기능 안전 정보 CD74HC4051-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2024. 4. 12
애플리케이션 노트 Selecting the Correct Texas Instruments Signal Switch (Rev. E) PDF | HTML 2022. 6. 2
애플리케이션 노트 Multiplexers and Signal Switches Glossary (Rev. B) PDF | HTML 2021. 12. 1
추가 자료 Automotive Logic Devices Brochure 2014. 8. 27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

인터페이스 어댑터

LEADED-ADAPTER1 — TI의 5, 8, 10, 16 및 24핀 리드 패키지의 빠른 테스트를 위한 DIP 헤더 어댑터에 대한 표면 실장

EVM-LEADED1 보드를 사용하면 TI의 공통 리드가 있는 패키지를 브레드보드 방식으로 빠르게 테스트할 수 있습니다.  이 보드에는 TI의 D, DBQ, DCT, DCU, DDF, DGS, DGV 및 PW 표면 실장 패키지를 100mil DIP 헤더로 변환할 수 있는 풋프린트가 있습니다.     

사용 설명서: PDF
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 16 Ultra Librarian
TSSOP (PW) 16 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상