제품 상세 정보

CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Wi-Fi Protocols Matter, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 802.11ax, AP, COEX, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
CPU External MCU, External MPU Type MCU or MPU attach, Module Technology Wi-Fi Protocols Matter, Wi-Fi 2.4 GHz Operating system Android, FreeRTOS, Linux, Zephyr RTOS Certifications CE, FCC, ISED, MIC, Wi-Fi CERTIFIED Chip Throughput UDP (max) (Mbps) 65 Features 802.11ax, AP, COEX, STA Edge AI enabled No Security Secure communication, Secure firmware & software update Rating Catalog Operating temperature range (°C) -40 to 85
QFM (MOZ) 65 121 mm² (11 mm × 11 mm)

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

Key Features

  • Wi-Fi 6 (802.11ax)
  • Bluetooth Low Energy 5.4 in CC33x1MOD
  • Companion module to any processor or MCU host capable of running a TCP/IP stack
  • Integrated 2.4GHz PA for a complete wireless system with up to +18.4dBm output power
  • Operating temperature: –40°C to +85°C
  • Application throughput up to 50Mbps
  • Regulatory Certification
    • FCC: Z64-CC33SBMOD
    • IC/ISED: 451I-CC33SBMOD
    • ETSI/CE
    • MIC (TELEC): 201-250389 (Test Grade: 01), 201-250390 (Test Grade: 00)
  • Based on CC3301 QuickTrack Qualified chipset
  • Bluetooth Controller Subsystem Qualified
Extended Features

  • Wi-Fi 6
    • 2.4GHz, 20MHz, single spatial stream
    • MAC, baseband, and RF transceiver with support for IEEE 802.11 b/g/n/ax
    • Target wake time (TWT), OFDMA, MU-MIMO (downlink), Basic Service Set Coloring, and trigger-based transmission for improved efficiency
    • Hardware-based encryption and decryption supporting WPA2 and WPA3
    • Excellent interoperability
    • Support for 4-bit SDIO or SPI host interfaces
  • Bluetooth Low Energy 5.4
    • LE Coded PHYs (long range), LE 2M PHY (high speed), and Advertising Extension
    • Host controller interface (HCI) transport with an option for UART or shared SDIO
    • Internal coexistence mechanism with Wi-Fi to share the same RF chains and antenna
  • Enhanced Security
    • Secured host interface
    • Firmware authentication
    • Anti-rollback protection
  • Multirole support (for example, concurrent STA and AP) to connect with Wi-Fi devices on different RF channels (Wi-Fi networks)
  • Optional antenna diversity or selection
  • 3-wire or 1-wire PTA for external coexistence with additional 2.4GHz radios (for example, Thread or Zigbee)
  • Clock sources

    • 40MHz XTAL fast clock (Integrated into the module)
    • Internal slow clock or external 32.768kHz slow clock
  • Small package size
    • Easy to design with 65-pin, 11mm × 11mm LGA package, 0.65mm pitch

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

The SimpleLink™ Wi-Fi CC33xx family of devices is where affordability meets reliability, enabling engineers to connect more applications with confidence. CC330xMOD devices are certified modules designed to simplify hardware design and reduce time-to-market.

  • CC3300MOD: A 2.4GHz Wi-Fi 6 companion module
  • CC3301MOD: A 2.4GHz Wi-Fi 6 and Bluetooth Low Energy 5.4 companion module

The CC330xMOD offers the latest standards from Wi-Fi and BLE while maintaining compatibility with Wi-Fi 4 (802.11 b/g/n). These CC330xMOD devices are based on the 10th-generation connectivity combo chip from Texas Instruments. As such, the CC330xMOD is based on proven technology. These modules are an excellent choice to use in cost-sensitive embedded applications with a Linux or RTOS host running TCP/IP. CC330xMOD brings the efficiency of Wi-Fi 6 to embedded device applications for the Internet of Things (IoT).

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
4개 모두 보기
상위 문서 유형 직함 형식 옵션 최신 영어 버전 다운로드 날짜
* 데이터 시트 CC330xMOD SimpleLink™ Wi-Fi 6 and Bluetooth® Low Energy Companion Module datasheet (Rev. A) PDF | HTML 2025. 8. 12
사용 설명서 CC33xx Hardware Integration User's Guide (Rev. B) PDF | HTML 2026. 6. 17
인증서 Module Certification Request Form (Change in ID / Change in Multiple Listing) (Rev. A) 2026. 5. 29
사용 설명서 CC33xx WLAN Features User's Guide (Rev. B) PDF | HTML 2024. 4. 15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

BP-CC3301MOD — SimpleLink™ CC3301MOD Wi-Fi 6 및 Bluetooth® 저에너지 BoosterPack™ 플러그인 모듈

SimpleLink™ CC3301MOD Wi-Fi 6 및 Bluetooth® 저에너지 장치는 Linux® 또는 RTOS를 실행하는 MCU 호스트를 사용하여 임베디드 애플리케이션에서 경제적이고 안정적이며 안전한 연결을 지원합니다. CC3301MOD BoosterPack™ 플러그인 모듈(BP-CC3301MOD)은 TI LaunchPad 개발 키트 또는 프로세서 보드에 손쉽게 연결할 수 있는 테스트 및 개발 보드로, 소프트웨어 개발을 빠르게 지원합니다.

이 키트는 다음 3가지 구성으로 사용할 수 있습니다.

  1. MCU 및 RTOS 평가: (...)
사용 설명서: PDF | HTML
지원되는 제품 및 하드웨어
재고 있음
제한:
??asset.out-of-stock-ti_ko_KR??
이용할 수 없음
IDE, 구성, 컴파일러 또는 디버거

CCSTUDIO — Code Composer Studio integrated development environment (IDE)

CCStudio™ IDE is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or cloud-based applications. The cloud version (...)

지원되는 제품 및 하드웨어
애플리케이션 소프트웨어 및 프레임워크

SIMPLELINK-WIFI-TOOLBOX — SimpleLink Wi-Fi Toolbox collection of tools to help development and testing of the CC33xx and CC35xxE Devices

이 Wi-Fi 툴박스 패키지는 호스트를 통해 WLAN/Bluetooth® Low Energy 펌웨어를 디버깅 및 모니터링하고, RF 검증 테스트를 수행하며, 규정 인증 테스트를 위한 사전 테스트를 실행하고, 하드웨어 및 소프트웨어 플랫폼 통합 문제를 디버깅하는 데 필요한 모든 기능을 제공합니다.

지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

CC33XX-LINUX-MPU — CC33xx device driver source for MPUs running Linux OS.

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

CC33XX-LINUX-MPU-PORTS-SW — CC33XX-LINUX-MPU Ports to LTS kernels and other HW platforms

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
드라이버 또는 라이브러리

CC33XX-RTOS-MCU — CC33xx device driver for MCU and RTOS platforms

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
지원 소프트웨어

CC33XX-QUICKTRACK-CONTROL-TOOL — CC33XX QuickTrack 제어 앱은 Wi-Fi® 인증에 사용되는 Wi-Fi 자동화 테스트 툴입니다

CC33XX 디바이스는 Linux 및 RTOS 기반 시스템 모두에 적합한 싱글 및 듀얼 밴드 Wi-Fi 6 및 Bluetooth 저에너지 5.4 컴패니언 디바이스입니다. CC33XX-SOFTWARE는 CC3300, CC3301, CC3350 and CC3351 디바이스를 위한 Linux 또는 RTOS 환경에서 신속한 설정, 즉시 사용 가능한 경험 및 개발 가속화를 원활하게 하기 위한 소프트웨어 개발 소스 모음입니다.

지원되는 제품 및 하드웨어
인증

SIMPLELINK-CC33XX-REPORTS — Reports: CC33xx Regulatory Certification

CC3XXX 인증 지원을 찾고 계십니까? SIMPLELINK-CC3XXX-CERTIFCATION은 CC31XX, CC32XX 및 CC33XX 제품의 성공적인 인증을 위한 관련 정보와 지원을 제공합니다. 이 페이지에서는 칩 다운 솔루션을 사용한 설계를 위한 TI의 모듈에 대한 최신 인증 보고서와 평가 보드를 확인할 수 있습니다.

지원되는 제품 및 하드웨어
설계 툴

CC33XX-DESIGN-TOOLS — Design resources for CC33xx and CC33xxMOD Devices

Design resources for CC33xx devices including design files and design checklists
지원되는 제품 및 하드웨어
패키지 CAD 기호, 풋프린트 및 3D 모델
QFM (MOZ) 65 Ultra Librarian

주문 및 품질

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상