BQ79826Z-Q1
- 26 Cell Voltage Measurement Channels
- 26s – 0V to 5.5V range for cell, -2V to 2V range for busbar
- 143V Absolute Maximum Rating, 12V minimum
- Busbar support on every channel, except first channel
- Stackable up to 128 devices per chain
- Cell Voltage
ADCs
- < 1.7mV accuracy, -40 to 125C, Cell: 0V to 4.5V
- Dedicated ADC per channel. Synchronized redundant measurement.
- Current Sense ADC
- Input range = ±275mV differential
- 0.1% accuracy, 10mA (50uΩ RSHUNT)
- Smart EIS Engine
- Integrated Electrochemical Impedance Spectroscopy measurement engine
- Impedance Accuracy: 1% (with 1A excitation and 200uΩ impedance)
- Measurement frequency: 0.01Hz to 3.5kHz
- Precise device-to-device I/V synchronization
- Support for pack and module excitation
- Passive Cell Balancing with integrated FETs up to 300mA @ 85C odd/even balancing with programmable PWM control
- GPIOs and
Sensors
- 20 GPIOs: Temp Sensor (NTC/PTC), ADC, voltage measurement, interrupt
- SPI / I2C Hub Interface
- Temperature Threshold for OTUT and cell balancing PCB temp
- Pressure Threshold / Peak Detector (Active / Sleep)
- Ultra-low Power Monitoring
- Cell over-voltage, under-voltage (OVUV)
- Cell over-temperature, under-temperature (OTUT)
- Configurable monitoring period 0.5s to 64s
- Reverse Wake Up based on selectable faults
- Diagnostics & Protection
- Redundant ADCs for cell voltage and temperature
- Automatic diagnostics during cell balancing in active mode
- Automatic open wire detection
- On-chip memory for one-time customer programming
- Upgraded Isolated
Daisy Chain Interface
- 2Mbps bus speed, Up to 4Mbps with dual SPI
- Robust to BCI injections
- Isolation: Transformer or capacitor only
- FDTI Time: <100ms for 800V packs or 250 cells
- Support for stack, ring, multidrop and split-ring
- Low Power
Consumption
- Integrated DC-DC Converter
- Shutdown: <10uA
- Ultra-low power monitoring (Deep Sleep): <20uA
- Active Mode: <5mA
- Functional Safety-Compliant
- Developed for functional safety applications
- Documentation to aid ISO 26262 system design
- Systematic capability and hardware integrity up to ASIL-D
- AEC-Q100 Qualified Grade 1
- Compatible with the BQ79881-Q1 pack monitor.
- System-level hardware and software development platform with complex device drivers (CDD).
- 100pin QFP, 0.4mm pitch, PowerPAD on bottom
이 제품에 사용할 수 있는 세부 정보가 없습니다.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
3개 모두 보기
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | BQ79826Z-Q1 Automotive 26 S Battery Monitor with Smart EIS Engine datasheet (Rev. A) | PDF | HTML | 2026. 9. 8 | |
| 기술 문서 | 배터리 인텔리전스의 다음 단계 구현 | PDF | HTML | 2026. 8. 14 | ||
| 백서 | 전기 화학 임피던스 분광법을 사용한 차세대 배터리 모니터링 | PDF | HTML | 2026. 6. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
평가 보드
BQ79826Q1EVM-086 — BQ79826Z-Q1 평가 모듈
BMS086이라고도 하는 BQ79826Z-Q1 평가 모듈(EVM)은 일반 기능, 작동 이론, 하드웨어 설정 및 TI의 BQ79826Z-Q1 장치 사용을 다룹니다. BQ79826ZQ1 장치는 최대 300mA 패시브 밸런싱 전류 용량, ±1.25mV 셀 전압 감지 정확도, 통합 OV/UV 셀 프로텍터를 갖춘 고집적 적층형 26셀 모니터입니다. 이 장치에는 추가 온도 감지 기능, SPI/I2C 제어 버스 지원 및 ASIL-D 기능 안전성을 갖춘 20개의 다용도 GPIO 핀이 있습니다. BQ79826Z-Q1은 시스템 내 셀 작동 진단 및 (...)
드라이버 또는 라이브러리
BQ79826-Q1-DESIGN — BQ79826Z-Q1 design resources
BQ79826Z-Q1 Document Repository
드라이버 또는 라이브러리
EIS-BQ798XX-Q1-DESIGN — BQ798XX-Q1 Electrochemical Impedance Spectroscopy Design resources
EIS design secure folder for BQ798XX-Q1
지원 소프트웨어
BQ79826-Q1-SW — BQ79826-Q1 software
BQ79826-Q1 software
레퍼런스 디자인
TIDA-010978 — 통합 EIS를 지원하는 최대 1500V 적층형 배터리 관리 유닛 레퍼런스 설계
이 레퍼런스 설계는 리튬 이온(Li-ion), 리튬 인산염(LiFePO4) 배터리 팩(52s 및 104s)을 위한 전체 셀 온도 감지 및 고정밀 셀 전압 정확도 측정을 제공합니다. 이 설계는 각 셀 전압, 셀 온도 및 임피던스를 모니터링하면서 통합된 EIS(전기 화학 임피던스 분광법) 및 견고한 데이지 체인 통신을 지원합니다. 이 레퍼런스 설계는 최대 1500V의 적층형 에너지 저장 시스템을 지원합니다. 이러한 기능을 통해 이 레퍼런스 디자인은 대용량 배터리 팩 애플리케이션에 적용할 수 있습니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| HTQFP (PZS) | 100 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.