홈 배터리 관리 IC 배터리 보호기
홈
배터리 관리 IC
배터리 보호기

BQ77307

활성

고정밀 셀 전압 측정 지원 2S~7S용 저전력 보호기

지금 주문하기
데이터 시트

BQ77307

활성
데이터 시트 지금 주문하기

제품 상세 정보

Rating Catalog Number of series cells (max) 7 Number of series cells (min) 2 Features FET drive, Low-side driver, Open wire (OW), Over-temperature (OT), Overcurrent during charge (OCC), Overcurrent during discharge (OCD), Overvoltage, Short-circuit Discharge (SCD), Under-temperature (UT), Undervoltage Function Protection Operating current (typ) (µA) 6 Vin (max) (V) 38.5 Operating temperature range (°C) -40 to 110 Battery overvoltage protection (min) (V) 0 Battery overvoltage protection (max) (V) 5.5
Rating Catalog Number of series cells (max) 7 Number of series cells (min) 2 Features FET drive, Low-side driver, Open wire (OW), Over-temperature (OT), Overcurrent during charge (OCC), Overcurrent during discharge (OCD), Overvoltage, Short-circuit Discharge (SCD), Under-temperature (UT), Undervoltage Function Protection Operating current (typ) (µA) 6 Vin (max) (V) 38.5 Operating temperature range (°C) -40 to 110 Battery overvoltage protection (min) (V) 0 Battery overvoltage protection (max) (V) 5.5
VQFN (RGR) 20 12.25 mm² 3.5 x 3.5
  • Primary or secondary voltage, current, and temperature protection for 2-series to 7-series cells with an autonomous recovery option
  • Voltage protection:
    • Cell overvoltage (COV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
    • Cell undervoltage (CUV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
  • Current protection:
    • Short circuit in discharge (SCD): 10 mV–500 mV, varying steps
    • Overcurrent in charge (OCC): 3 mV–123 mV, 2-mV steps
    • Overcurrent in discharge 1 and 2 (OCD1 and OCD2): 4 mV–200 mV, 2-mV steps
  • Temperature protection using external NTC thermistor:
    • Overtemperature in charge and discharge (OTC and OTD)
    • Undertemperature in charge and discharge (UTC and UTD)
    • Internal die overtemperature
  • Integrated low-side drivers for NFET protection with an optional autonomous recovery
  • Low power operation:
    • NORMAL mode, both FETs enabled: 8 µA
    • NORMAL mode, FETs disabled: 5 µA
    • SHUTDOWN Mode: < 1 µA
  • High voltage tolerance of 45 V on cell connect and select additional pins
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • Programmable interrupt for host processor, status information available through I 2C
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN 3.5 mm × 3.5 mm × 0.9 mm (RGR) package
  • Primary or secondary voltage, current, and temperature protection for 2-series to 7-series cells with an autonomous recovery option
  • Voltage protection:
    • Cell overvoltage (COV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
    • Cell undervoltage (CUV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
  • Current protection:
    • Short circuit in discharge (SCD): 10 mV–500 mV, varying steps
    • Overcurrent in charge (OCC): 3 mV–123 mV, 2-mV steps
    • Overcurrent in discharge 1 and 2 (OCD1 and OCD2): 4 mV–200 mV, 2-mV steps
  • Temperature protection using external NTC thermistor:
    • Overtemperature in charge and discharge (OTC and OTD)
    • Undertemperature in charge and discharge (UTC and UTD)
    • Internal die overtemperature
  • Integrated low-side drivers for NFET protection with an optional autonomous recovery
  • Low power operation:
    • NORMAL mode, both FETs enabled: 8 µA
    • NORMAL mode, FETs disabled: 5 µA
    • SHUTDOWN Mode: < 1 µA
  • High voltage tolerance of 45 V on cell connect and select additional pins
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • Programmable interrupt for host processor, status information available through I 2C
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN 3.5 mm × 3.5 mm × 0.9 mm (RGR) package

The Texas Instruments BQ77307 family of products features a highly integrated,high-accuracy primary protector for 2-series to 7-series Li-ion, Li-polymer, LiFePO 4 (LFP), and LTO battery packs. Each device includes a high-accuracy voltage, current, and temperature protection subsystem with integrated low-side protection NFET drivers and a programmable LDO for external system use. The BQ77307 provides an interrupt to a host processor and integrates an I 2C host communication interface, supporting up to 400-kHz operation with optional CRC to read status information and program settings. The BQ77307 is available in a 20-pin QFN package.

The Texas Instruments BQ77307 family of products features a highly integrated,high-accuracy primary protector for 2-series to 7-series Li-ion, Li-polymer, LiFePO 4 (LFP), and LTO battery packs. Each device includes a high-accuracy voltage, current, and temperature protection subsystem with integrated low-side protection NFET drivers and a programmable LDO for external system use. The BQ77307 provides an interrupt to a host processor and integrates an I 2C host communication interface, supporting up to 400-kHz operation with optional CRC to read status information and program settings. The BQ77307 is available in a 20-pin QFN package.
filter 기타 배터리 보호기 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet BQ77307 2-Series to 7-Series High Accuracy Battery Primary or Secondary Protector for Li-Ion, Li-Polymer, LiFePO4(LFP), and LTO Battery Packs datasheet PDF | HTML 2023/12/05
User guide BQ77307 Technical Reference Manual PDF | HTML 2023/12/06

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

애플리케이션 소프트웨어 및 프레임워크

BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – untested version downloads

Battery Management Studio (bqStudio) offers a full suite of robust tools to assist with the process of evaluating, designing with, configuring, testing, or otherwise utilizing TI Battery management products. This includes features that provide full access to registers and data memory including (...)

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드 옵션
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGR) 20 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상