이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
BQ40Z60
- Fully Integrated 2-Series to 4-Series Cell Li-Ion or Li-Polymer Battery Management Unit
- Input Voltage Range on Pack+: 2.5 V to 25 V
- Battery Charger Efficiency > 92%
- Battery Charger Operation Range: 4 V to 25 V
- Battery Charger, 1-MHz Synchronous Buck Controller for External NFETs
- Soft Start to Limit In-Rush Current
- Current Limit Protection for External Switches
- Programmable Charging
- Supports JEITA/Enhanced Charging Modes
- Fuel Gauging
- High Resolution 16-Bit Integrator for Coulomb Counter
- ADC, 16-Bit for Precision V, I, and T Measurements with 16-Channel Multiplexer
- Support for Simultaneous CC and ADC Sampling (Power Conversion)
- Supports Two-Wire SMBus v2.0 Interface with Accelerated 400-kHz Programming Option
- SHA-1 Hash Message Authentication Code (HMAC) Responder for Increased Battery Pack Security
- Split Key (2 × 64) Stored in Secure Memory
- Supports Field Updates
- AFE Protection
- Programmable Current Protection
- Overcurrent in Discharge
- Short-Circuit Current in Charge
- Short-Circuit Current in Discharge
- Programmable Current Protection
- N-FET High-Side Protection FET Drive
- Support for Four LEDs
- Thermistor inputs for NTC
- Compact 32-Pin QFN Package (RHB)
The Texas Instruments bq40z60 device is a Programmable Battery Management Unit that integrates battery charging control output, gas gauging, and protection for completely autonomous operation of 2-series to 4-series cell Li-Ion and Li-Polymer battery packs. The architecture enables internal communication between the fuel gauging processor and battery charger controller to optimize the charging profile based on the external load conditions and power path source management during load transients and adaptor current limitations in the system. The charging current efficiency is scalable for power transfer based on the external components, such as the NFETs, inductor, and sensing resistor.
The device provides an array of battery and system safety functions, including overcurrent in discharge, short circuit in charge, and short circuit in discharge protection for the battery, as well as FET protection for the N-CH FETs, internal AFE watchdog, and cell disconnection detection. Through firmware, the device can provide a larger array of protection features including overvoltage, undervoltage, overtemperature, and more.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | bq40z60 Programmable Battery Management Unit datasheet (Rev. D) | PDF | HTML | 2017. 1. 3 | |
| 애플리케이션 노트 | Achieving The Successful Learning Cycle | PDF | HTML | 2018. 6. 19 | ||
| 애플리케이션 노트 | Simple Guide to Chemical ID Selection Tool (GPC) (Rev. A) | PDF | HTML | 2018. 6. 5 | ||
| 사용 설명서 | bq40z60 Technical Reference Manual (Rev. D) | 2017. 3. 23 | |||
| 애플리케이션 노트 | Gauge Communication | 2017. 1. 12 | |||
| 애플리케이션 노트 | Turbo Mode 1.0 Setup Steps | 2016. 12. 13 | |||
| 애플리케이션 노트 | SMBus Made Simple | PDF | HTML | 2016. 11. 9 | ||
| 기술 문서 | Precision farming with flying farmers | PDF | HTML | 2015. 9. 3 | ||
| 애플리케이션 노트 | bq40z60 Charging Voltage Compensation | 2015. 6. 29 | |||
| 애플리케이션 노트 | bq40zxx Manufacture, Production, and Calibration (Rev. A) | 2015. 3. 23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ40Z60EVM-578 — 2 시리즈, 3 시리즈, 3 시리즈 및 4 시리즈 리튬 이온 배터리 팩 관리자 평가 모듈
BQ40z60EVM is a complete system useful for evaluating the functionality of the bq40z60 fuel gauge and charger. As described on the BQ40z60 product folder, this gauge is appropriate for applications powered by multi-cell battery systems. The EVM includes one bq40z60 circuit module and external (...)
BQSTUDIO-STABLE — Battery Management Studio (bqStudio) Software – stable version downloads for bq series of TI battery fuel gauges
bqStudio(Battery Management Studio)는 TI 배터리 관리 제품의 평가, 설계, 구성, 테스트 또는 기타 활용 프로세스를 지원하는 견고한 종합 툴을 제공합니다. 여기에는 실시간 감시, 그래프 및 로깅 지원, 명령 전송을 위한 간편한 인터페이스, 직접 저수준 통신 및 I/O, 구성, 보정, 학습 주기 수행, 장치를 생산 단계로 가져가기 위한 유용한 파일 생성 등 레지스터 및 데이터 메모리에 대한 전체 액세스를 제공하는 기능은 물론, 자동화된 가이드 지원도 포함됩니다.
bq20xxx 및 bq30xxx와 같은 (...)
BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – untested version downloads
bqStudio(Battery Management Studio)는 TI 배터리 관리 제품의 평가, 설계, 구성, 테스트 또는 기타 활용 프로세스를 지원하는 견고한 종합 툴을 제공합니다. 여기에는 실시간 감시, 그래프 및 로깅 지원, 명령 전송을 위한 간편한 인터페이스, 직접 저수준 통신 및 I/O, 구성, 보정, 학습 주기 수행, 장치를 생산 단계로 가져가기 위한 유용한 파일 생성 등 레지스터 및 데이터 메모리에 대한 전체 액세스를 제공하는 기능은 물론, 자동화된 가이드 지원도 포함됩니다.
bq20xxx 및 bq30xxx와 같은 (...)
GPCCHEM — 게이징 매개 변수 계산기: Impedance Track 게이지의 화학 성분 일치
실온 또는 저온 성능을 최적화하기 전에 IT(Impedance Track) 알고리즘 가스 게이지에 대한 GPC 화학 ID 일치(가장 가까운 화학 일치 찾기)를 수행해야 합니다.
게이징 매개 변수 계산기 임피던스 트랙 가스 게이지에 대한 화학 ID 일치(GPCCHEM)는 배터리 설계자가 특정 배터리 프로파일에 대해 일치하는 화학 ID를 얻는 데 도움이 되는 수학 계산 및 시뮬레이션 툴입니다. 화학 ID는 텍사스 인스트루먼트에서 정의하며 bqStudio(Battery Management Studio)를 사용하여 프로그래밍할 수 (...)
GPCRA0 — 게이징 매개 변수 계산기: Impedance Track 게이지를 위한 실내 온도 성능 최적화
Gauging Parameter Calculator – Optimize room temperature performance for Impedance track gas gauges (GPCRA0) / Golden GG Maker is a math calculation tool that helps the battery designer to refine the Impedance Track battery gauge parameters for a given battery profile. It provides optimized (...)
GPCRB — 게이징 매개 변수 계산기: 실내 및 온도 성능이 낮은 Impedance Track g 게이지 최적화
Gauging Parameter Calculator – Optimize room and low temperature performance for Impedance track gas gauges (GPCRB) is a math calculation tool that helps the battery designer to refine the Impedance Track battery gauge parameters for a given battery profile. Depending on the input log file, (...)
SLUC598 — bq40z60 Firmware
BQ-PRODUCTION-SW — Production software for 4th generation multicell battery fuel (gas) gauges
bqProduction은 TI 배터리 관리 제품을 사용하여 인쇄 회로 보드를 구성, 보정, 제조 및 추적하는 프로세스를 지원하는 견고한 완전한 툴 모음을 제공합니다. 여기에는 골든 이미지에 이어 다양한 유형의 보정을 통해 원하는 수준의 정확도를 제공하고, 고유한 일련 번호를 작성하고, 포장 로트 코드를 작성하고, 마지막으로 교정 매개변수에 대한 한계를 검증하여 재료의 불일치를 제거할 수 있는 기능이 포함됩니다. bqProduction은 "시작" 버튼에만 액세스할 수 있는 조립 라인 운영자를 통해 제조 공정을 엄격하게 제어할 수 (...)
TIDA-00553 — 충전, 게이지, 인증 및 보호가 통합된 멀티 셀 배터리 관리자 장치
The Texas Instruments bq40z60 device is a Battery Pack Manager that integrates battery charging control output, gas gauging, and protection for completely autonomous operation of 2-series to 4-series cell Li-Ion and Li-Polymer battery packs. The architecture enables internal communication between (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.