이 제품의 최신 버전이 있습니다
비교 대상 장치보다 업그레이드된 기능을 지원하는 즉각적 대체품.
BQ40Z50-R1
- Fully Integrated 1-Series, 2-Series, 3-Series, and
4-Series Li-Ion or Li-Polymer Cell Battery Pack
Manager and Protection - Next-Generation Patented Impedance Track™
Technology Accurately Measures Available
Charge in Li-Ion and Li-Polymer Batteries - High Side N-CH Protection FET Drive
- Integrated Cell Balancing While Charging or At
Rest - Full Array of Programmable Protection Features
- Voltage
- Current
- Temperature
- Charge Timeout
- CHG/DSG FETs
- AFE
- Sophisticated Charge Algorithms
- JEITA
- Enhanced Charging
- Adaptive Charging
- Cell Balancing
- Supports TURBO BOOST Mode
- Supports Battery Trip Point (BTP)
- Diagnostic Lifetime Data Monitor and Black Box
Recorder - LED Display
- Supports Two-Wire SMBus v1.1 Interface
- SHA-1 Authentication
- Compact Package: 32-Lead QFN (RSM)
The bq40z50-R1 device, incorporating patented Impedance Track™ technology, is a fully integrated, single-chip, pack-based solution that provides a rich array of features for gas gauging, protection, and authentication for 1-series, 2-series, 3-series, and 4-series cell Li-Ion and Li-Polymer battery packs.
Using its integrated high-performance analog peripherals, the bq40z50-R1 device measures and maintains an accurate record of available capacity, voltage, current, temperature, and other critical parameters in Li-Ion or Li-Polymer batteries, and reports this information to the system host controller over an SMBus v1.1 compatible interface.
The bq40z50-R1 device supports TURBO BOOST mode by providing the available max power and max current to the host system. The device also supports Battery Trip Point to send a BTP interrupt signal to the host system at the pre-set state of charge thresholds.
The bq40z50-R1 provides software-based 1st- and 2nd-level safety protection against overvoltage, undervoltage, overcurrent, short-circuit current, overload, and overtemperature conditions, as well as other pack- and cell-related faults.
SHA-1 authentication, with secure memory for authentication keys, enables identification of genuine battery packs.
The compact 32-lead QFN package minimizes solution cost and size for smart batteries while providing maximum functionality and safety for battery gauging applications.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ40Z50EVM-561 — 1 시리즈, 2 시리즈, 3 시리즈 및 4 시리즈 리튬 이온 배터리 팩 관리자 평가 모듈
BQ40z50EVM is a complete system useful for evaluating the functionality of the bq40z50 fuel gauge. As described on the BQ40z50 product folder, this gauge is appropriate for applications powered by multi-cell battery systems. The EVM includes one bq40z50 circuit module, a current sense resistor, and (...)
BQSTUDIO-STABLE — Battery Management Studio (bqStudio) Software – stable version downloads for bq series of TI battery fuel gauges
bqStudio(Battery Management Studio)는 TI 배터리 관리 제품의 평가, 설계, 구성, 테스트 또는 기타 활용 프로세스를 지원하는 견고한 종합 툴을 제공합니다. 여기에는 실시간 감시, 그래프 및 로깅 지원, 명령 전송을 위한 간편한 인터페이스, 직접 저수준 통신 및 I/O, 구성, 보정, 학습 주기 수행, 장치를 생산 단계로 가져가기 위한 유용한 파일 생성 등 레지스터 및 데이터 메모리에 대한 전체 액세스를 제공하는 기능은 물론, 자동화된 가이드 지원도 포함됩니다.
bq20xxx 및 bq30xxx와 같은 (...)
BQSTUDIO-TEST — Battery Management Studio (bqStudio) Software – untested version downloads
bqStudio(Battery Management Studio)는 TI 배터리 관리 제품의 평가, 설계, 구성, 테스트 또는 기타 활용 프로세스를 지원하는 견고한 종합 툴을 제공합니다. 여기에는 실시간 감시, 그래프 및 로깅 지원, 명령 전송을 위한 간편한 인터페이스, 직접 저수준 통신 및 I/O, 구성, 보정, 학습 주기 수행, 장치를 생산 단계로 가져가기 위한 유용한 파일 생성 등 레지스터 및 데이터 메모리에 대한 전체 액세스를 제공하는 기능은 물론, 자동화된 가이드 지원도 포함됩니다.
bq20xxx 및 bq30xxx와 같은 (...)
GPCCHEM — 게이징 매개 변수 계산기: Impedance Track 게이지의 화학 성분 일치
실온 또는 저온 성능을 최적화하기 전에 IT(Impedance Track) 알고리즘 가스 게이지에 대한 GPC 화학 ID 일치(가장 가까운 화학 일치 찾기)를 수행해야 합니다.
게이징 매개 변수 계산기 임피던스 트랙 가스 게이지에 대한 화학 ID 일치(GPCCHEM)는 배터리 설계자가 특정 배터리 프로파일에 대해 일치하는 화학 ID를 얻는 데 도움이 되는 수학 계산 및 시뮬레이션 툴입니다. 화학 ID는 텍사스 인스트루먼트에서 정의하며 bqStudio(Battery Management Studio)를 사용하여 프로그래밍할 수 (...)
GPCRA0 — 게이징 매개 변수 계산기: Impedance Track 게이지를 위한 실내 온도 성능 최적화
Gauging Parameter Calculator – Optimize room temperature performance for Impedance track gas gauges (GPCRA0) / Golden GG Maker is a math calculation tool that helps the battery designer to refine the Impedance Track battery gauge parameters for a given battery profile. It provides optimized (...)
GPCRB — 게이징 매개 변수 계산기: 실내 및 온도 성능이 낮은 Impedance Track g 게이지 최적화
Gauging Parameter Calculator – Optimize room and low temperature performance for Impedance track gas gauges (GPCRB) is a math calculation tool that helps the battery designer to refine the Impedance Track battery gauge parameters for a given battery profile. Depending on the input log file, (...)
BQ40Z50-DEVICE-FW — Firmware for bq40z50 family of gauges
BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products
BQ-BATTERY-PROGRAMMER-SW 소프트웨어 개발 키트(SDK)는 TI 배터리 관리 제품을 사용하는 팩의 프로그래밍, 테스트 또는 조립 프로세스를 지원하는 강력한 소프트웨어 명령줄 툴 모음입니다. 이 소프트웨어의 실행 파일은 EV2300 통신 트랜스시버용 MKST-3P-ALT-EV2300 MKS 기술 대안과 함께 작동합니다. 실행 파일은 단일 스테이션에서 작동하지만 MKS Technology Inc.의 추가 소프트웨어 및 GUI를 사용하여 여러 스테이션으로 확장할 수 있습니다. 이 소프트웨어에는 여러 스테이션에 대한 (...)
BQ-PRODUCTION-SW — Production software for 4th generation multicell battery fuel (gas) gauges
bqProduction은 TI 배터리 관리 제품을 사용하여 인쇄 회로 보드를 구성, 보정, 제조 및 추적하는 프로세스를 지원하는 견고한 완전한 툴 모음을 제공합니다. 여기에는 골든 이미지에 이어 다양한 유형의 보정을 통해 원하는 수준의 정확도를 제공하고, 고유한 일련 번호를 작성하고, 포장 로트 코드를 작성하고, 마지막으로 교정 매개변수에 대한 한계를 검증하여 재료의 불일치를 제거할 수 있는 기능이 포함됩니다. bqProduction은 "시작" 버튼에만 액세스할 수 있는 조립 라인 운영자를 통해 제조 공정을 엄격하게 제어할 수 (...)
TIDA-00883 — 1~4시리즈 셀 리튬 이온 배터리 팩 관리자 레퍼런스 디자인
텍사스 인스트루먼트 bq40z50-R1 장치는 가스 게이징 및 보호 기능을 통합한 배터리 팩 관리자로, 1~4직렬 셀 리튬 이온 및 리튬 폴리머 배터리 팩의 완전 자율 작동을 지원합니다. 이 아키텍처는 SMBus 브로드캐스트 명령을 통해 연료 게이징 프로세서와 외부 배터리 충전기 컨트롤러 간의 통신을 지원합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RSM) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.