BQ27Z558
- Supports high-side and low-side current sense resistors down to 1 mΩ
- Supports pack-side gauging including enhanced state of health (SOH) algorithm
- Fast QMax update option based on predicted OCV
- SHA-256 authentication responder for increased battery pack security
- Sophisticated charge algorithms
- JEITA
- Enhanced charging
- RSOC charging compensation option
- Two independent ADCs
- Support for simultaneous current and voltage sampling
- High-accuracy coulomb counter with input offset error < 1 µV (typical)
- Low-voltage (2-V) operation
- Wide-range current applications (1 mA to > 5 A)
- Active high or low pulse or level interrupt pin
- Supports battery trip point (BTP)
- Reduced power modes (typical
battery pack operating range conditions)
- Typical SLEEP mode: < 11 µA
- Typical DEEP SLEEP mode: < 9 µA
- Typical HIBERNATE mode: < 3 µA
- Typical OFF mode: < 1.9 µA
- Internal and external temperature sense functions
- Diagnostic lifetime data monitor and black box recorder
- 400-kHz I 2C bus communications interface, including a 1.2-V logic level for high-speed programming and data access
- HDQ one-wire for communication with host
- Compact 12-pin DSBGA package (YPH)
The Texas Instruments BQ27Z558 Impedance Track™ gas gauge solution is a highly integrated, accurate 1-series cell gas gauge with a flash programmable custom reduced instruction-set CPU (RISC) and SHA-256 authentication for Li-ion and Li-polymer battery packs. The 1-series cell capability includes parallel cells for increased capacity.
The BQ27Z558 gas gauge communicates through I 2C-compatible and HDQ one-wire interfaces and includes several key features that can help facilitate accurate gas gauging applications. Integrated temperature sense functions (internal and external options) enable system and battery temperature measurements.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | BQ27Z558 Impedance Track™ Battery Gas Gauge Solutionfor 1-Series Cell Li-Ion Battery Packs, with 1.2-V IO Support datasheet | PDF | HTML | 2023. 11. 10 | ||
| * | 사용 설명서 | BQ27Z561-R2 and BQ27Z558 Technical Reference Manual (Rev. C) | PDF | HTML | 2024. 3. 3 | ||
| 애플리케이션 노트 | How to Create and Program Authentication Keys into TI Battery Fuel Gauges | PDF | HTML | 2025. 3. 5 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ27Z558EVM-084 — 단일 셀 Impedance Track™ 기술 가스 게이지용 BQ27Z558 평가 모듈
BQ27Z558 평가 모듈(EVM)은 BQ27Z558 배터리 게이지용 개발 플랫폼입니다. 회로 모듈에는 BQ27Z558 통합 회로(IC)와 1 직렬 셀 리튬 이온 또는 리튬 폴리머 배터리의 용량을 모니터링하고 예측하는 데 필요한 기타 모든 구성 요소가 포함되어 있습니다.
BQ-BMS-PROGRAMMER-SW — Command line programmers for BQ products
BQ-BATTERY-PROGRAMMER-SW 소프트웨어 개발 키트(SDK)는 TI 배터리 관리 제품을 사용하는 팩의 프로그래밍, 테스트 또는 조립 프로세스를 지원하는 강력한 소프트웨어 명령줄 툴 모음입니다. 이 소프트웨어의 실행 파일은 EV2300 통신 트랜스시버용 MKST-3P-ALT-EV2300 MKS 기술 대안과 함께 작동합니다. 실행 파일은 단일 스테이션에서 작동하지만 MKS Technology Inc.의 추가 소프트웨어 및 GUI를 사용하여 여러 스테이션으로 확장할 수 있습니다. 이 소프트웨어에는 여러 스테이션에 대한 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YPH) | 12 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.