BQ27411-G1
- Single-Cell Li-Ion Battery Fuel Gauge
- Resides in Battery Pack
- Low-Value External Sense Resistor
(10 mΩ Typical) - One Time Programmable (OTP) Configuration Non-Volatile Memory (NVM)
- Powered Directly from Battery with Integrated LDO
- 400-kHz I2C™ Serial Interface
- Internal Temperature Sensor or
Host-reported Temperature
- Battery Fuel Gauging Based on Patented Impedance
Track™ Technology
- Reports Remaining Capacity and State of Charge (SOC) with Smoothing Filter
- Automatically Adjusts for Battery Aging, Self-discharge, Temperature, and Rate Changes
- Battery State of Health (Aging) Estimation
The Texas Instruments bq27411-G1 device is a battery fuel gauging solution for single-cell Li-Ion battery packs. The device requires minimal configuration and uses One Time Programmable (OTP) Non-Volatile Memory (NVM) to avoid an initialization download by the system processor.
The fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV).
The small, 12-pin, 2.50 mm × 4.00 mm, Small Outline No-Lead (SON) package is ideal for space-constrained applications.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | bq27411-G1 Single-Cell Li-Ion Battery Fuel Gauge for Battery Pack Integration datasheet (Rev. D) | PDF | HTML | 2016. 1. 2 | |
| * | 사용 설명서 | bq27411-G1 Technical Reference Manual (Rev. B) | 2015. 6. 5 | ||
| 애플리케이션 노트 | Method for TI Gauge to Avoid SOC Jump on Smart Phone Application | 2022. 2. 25 | |||
| 애플리케이션 노트 | Enhanced Resolution Gauging for Low Current Applications Using Scaling | 2016. 10. 26 | |||
| EVM User's guide | bq27411EVM System-Side Impedance Track Fuel Gauge (Rev. A) | 2016. 7. 31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BQ27411EVM-G1C — BQ27411EVM-G1C 팩 측 Impedance Track™ 연료(가스) 게이지 평가 모듈
The BQ27411EVM-G1C Pack-Side Impedance Track™ Fuel (Gas) Gauge evaluation module is a complete evaluation system for the bq27411-G1C. The EVM includes one bq27411-G1C circuit module with external current-sense resistor. The bq27411-G1C should be used with batteries that have a 4.35 V (...)
BQ27441EVM-G1A — 시스템 측 Impedance Track™ 배터리 연료(가스) 게이지 평가 모듈
BQ27441EVM-G1B — 시스템 측 Impedance Track™ 배터리 연료(가스) 게이지 평가 모듈
BQSTUDIO — bqStudio(Battery Management Studio) 소프트웨어
bqStudio(Battery Management Studio)는 TI 배터리 관리 제품의 평가, 설계, 구성, 테스트 또는 기타 활용 프로세스를 지원하는 견고한 종합 툴을 제공합니다. 여기에는 실시간 감시, 그래프 및 로깅 지원, 명령 전송을 위한 간편한 인터페이스, 직접 저수준 통신 및 I/O, 구성, 보정, 학습 주기 수행, 장치를 생산 단계로 가져가기 위한 유용한 파일 생성 등 레지스터 및 데이터 메모리에 대한 전체 액세스를 제공하는 기능은 물론, 자동화된 가이드 지원도 포함됩니다.
bq20xxx 및 bq30xxx와 같은 (...)
BQEVSW-MKST-UPDATE — Software Update to enable BQEVSW to use MKST-3P-ALT-EV2300
BQ-BATTERY-PROGRAMMER-SW 소프트웨어 개발 키트(SDK)는 TI 배터리 관리 제품을 사용하는 팩의 프로그래밍, 테스트 또는 조립 프로세스를 지원하는 강력한 소프트웨어 명령줄 툴 모음입니다. 이 소프트웨어의 실행 파일은 EV2300 통신 트랜스시버용 MKST-3P-ALT-EV2300 MKS 기술 대안과 함께 작동합니다. 실행 파일은 단일 스테이션에서 작동하지만 MKS Technology Inc.의 추가 소프트웨어 및 GUI를 사용하여 여러 스테이션으로 확장할 수 있습니다. 이 소프트웨어에는 여러 스테이션에 대한 (...)
SLUC561 — BQ27411-G1 Smart Flash Files
TIDA-00241 — 팩 측(Pack-side) Impedance Track 연료 게이지
The Texas Instruments bq27411-G1 reference design is an easy to configure fuel gauging solution for single series cell Li-Ion battery packs. The device requires minimal configuration and uses One Time Programmable (OTP) Non-Volatile Memory (NVM) to avoid an initialization download by the system (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSON (DRZ) | 12 | Ultra Librarian |