AMC3330
- 3.3V or 5V single supply operation with integrated DC/DC converter
- ±1V input voltage range optimized for voltage measurements with high input impedance
- Fixed gain: 2.0
- Low DC errors:
- Gain error: ±0.2% (max)
- Gain drift: ±45ppm/°C (max)
- Offset error: ±0.3mV (max)
- Offset drift: ±4µV/°C (max)
- Nonlinearity: ±0.02% (max)
- High CMTI: 85kV/µs (min)
- System-level diagnostic features
- Safety-related certifications:
- 6000VPK reinforced isolation per DIN EN IEC 60747-17 (VDE 0884-17)
- 4250VRMS isolation for 1 minute per UL1577
- Meets CISPR-11 and CISPR-25 EMI standards
The AMC3330 is a precision, isolated amplifier with a fully integrated, isolated DC/DC converter that allows single-supply operation from the low-side of the device. The reinforced capacitive isolation barrier is certified according to DIN EN IEC 60747-17 (VDE 0884-17) and UL1577 and separates sections of the system that operate on different common-mode voltage levels and protects low-voltage domains from damage.
The input of the AMC3330 is optimized for direct connection to high-impedance, voltage-signal sources such as a resistor-divider network to sense high-voltage signals. The integrated isolated DC/DC converter allows measurement of non-ground-referenced signals and makes the device a unique solution for noisy, space-constrained applications.
The excellent performance of the device supports accurate voltage monitoring and control. The integrated DC/DC converter fault-detection and diagnostic output pin of the AMC3330 simplify system-level design and diagnostics.
The AMC3330 is specified over the temperature range of –40°C to +125°C.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMC3330EVM — AMC3330 정밀 강화 절연 증폭기와 통합 DC/DC 컨버터 평가 모듈
AMC3330 평가 모듈(EVM)은 증폭기의 고압측에 전원을 공급하는 통합 DC/DC 컨버터를 갖춘 정밀 절연 증폭기인 AMC3330 제품을 위한 평가 플랫폼입니다. AMC3330는 양극 전압 측정 애플리케이션에 사용하도록 설계된 7kV 강화 절연 증폭기입니다.
회로도 다이어그램 및 BOM(재료 사양서)는 물론 완전한 회로 설명이 사용 설명서에 포함되어 있습니다.
AMC3330 and AMC3330-Q1 TINA-TI Spice Model (Rev. B)
SBAR020 — Isolated Amplifier Current Sensing Excel Calculator
지원되는 제품 및 하드웨어
제품
절연 증폭기
절연 ADC
정밀 ADC
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TIDA-010933 — GaN 레퍼런스 설계 기반의 1.6kW, 양방향 마이크로 인버터
TIDA-010232 — 고압 EV 충전 및 태양 에너지 레퍼런스 설계 절연 모니터링용 AFE
TIDA-010955 — 태양광 애플리케이션의 머신 러닝 아크 감지를 위한 아날로그 프론트 엔드 레퍼런스 디자인
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SO-MOD (DWE) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.