AMC1304L05
- Pin-compatible family optimized for shunt-resistor-based current measurements:
- ±50-mV or ±250-mV input voltage ranges
- CMOS or LVDS digital interface options
- Excellent DC performance supporting high-precision sensing on system level:
- Offset error: ±50 µV or ±100 µV (max)
- Offset drift: 1.3 µV/°C (max)
- Gain error: ±0.2% or ±0.3% (max)
- Gain drift: ±40 ppm/°C (max)
- Safety-related certifications:
- 7000-VPK reinforced isolation per
DIN VDE V 0884-11: 2017-01 - 5000-VRMS isolation for 1 minute per UL1577
- CAN/CSA no. 5A-component acceptance service notice and IEC 62368-1 end equipment standard
- 7000-VPK reinforced isolation per
- Transient immunity: 15 kV/µs (min)
- High electromagnetic field immunity
(see application note SLLA181A) - External 5-MHz to 20-MHz clock input for
easier system-level synchronization - On-chip 18-V LDO regulator
- Fully specified over the extended industrial temperature range
The AMC1304 is a precision, delta-sigma (ΔΣ) modulator with the output separated from the input circuitry by a capacitive double isolation barrier that is highly resistant to magnetic interference. This barrier is certified to provide reinforced isolation of up to 7000 VPEAK according to the DIN VDE V 0884-11, UL1577 and CSA standards. Used in conjunction with isolated power supplies, the device prevents noise currents on a high common-mode voltage line from entering the local system ground and interfering with or damaging low voltage circuitry.
The input of the AMC1304 is optimized for direct connection to shunt resistors or other low voltage-level signal sources. The unique low input voltage range of the ±50-mV device allows significant reduction of the power dissipation through the shunt while supporting excellent ac and dc performance. By using an appropriate digital filter (that is, as integrated on the TMS320F2807x or TMS320F2837x families) to decimate the bit stream, the device can achieve 16 bits of resolution with a dynamic range of 81 dB (13.2 ENOB) at a data rate of 78 kSPS.
On the high-side, the modulator is supplied by an integrated low-dropout (LDO) regulator that allows an unregulated input voltage between 4 V and 18 V (LDOIN). The isolated digital interface operates from a 3.3-V or 5-V power supply (DVDD).
The AMC1304 is available in a wide-body SOIC-16 (DW) package and is specified from –40°C to +125°C.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | AMC1304x High-Precision, Reinforced Isolated Delta-Sigma Modulators with LDO datasheet (Rev. F) | PDF | HTML | 2020/01/06 |
| Certificate | VDE Certificate for Reinforced Isolation for DIN EN IEC 60747-17 (Rev. Y) | 2025/09/22 | ||
| White paper | 절연 증폭기와 절연 모듈레이터 비교 (Rev. B) | PDF | HTML | 2024/08/19 | |
| Application brief | 절연 데이터 컨버터를 위한 션트 레지스터 선택 | PDF | HTML | 2024/08/15 | |
| Application note | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023/03/29 | |
| Certificate | UL Certificate of Compliance Vol4 Sec5 E181974 (Rev. A) | 2023/01/23 | ||
| Application brief | Integrated, Current Sensing Analog-to-Digital Converter (Rev. A) | PDF | HTML | 2021/09/28 | |
| White paper | High Voltage Isolation Quality and Reliability for AMC130x | 2016/06/21 | ||
| Application note | How to Optimize Performance of AMC1304/05M05 in Voltage Sensing | 2015/08/31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
AMC-MOD-50A-EVM — 50A 절연 전류 감지를 위한 AMC1306 평가 모듈
AMC-MOD-50A-EVM은 ±50A 션트 기반 전류 감지를 위해 설계된 절연 전류 감지 평가 모듈입니다. 이 EVM을 사용하면 외부 션트 저항을 통해 최대 ±50A 피크 전류를 감지하는 동시에 AMC1306M05의 절연 장벽을 통해 절연 출력을 측정할 수 있습니다. AMC1306M05는 션트 기반 전류 측정에 최적화된 고정밀 절연 모듈레이터이며 Isabellenhütte™ BVN-M-R001 션트 저항과 함께 사용할 수 있습니다. 이 EVM은 비아 스티칭은 큰 전류에서 방열을 용이하게 하며 ±1%(일반) 이내의 정확도로 (...)
AMC1304L05EVM — AMC1304L05 평가 모듈
The AMC1304L05 is an isolated single-channel delta-sigma (ΔΣ) modulator used in high-resolution measurement applications including current monitoring, industrial process control and motor positioning systems. The AMC1304L05EVM is a small form factor board containing all the necessary components to (...)
TMDSCNCD28379D — C2000™ Delfino MCU controlCARD™용 F28379D 개발 키트
TMDSCNCD28379D는 TI MCU의 F2837xD, F2837xS 및 F2807x 시리즈를 위한 HSEC180 controlCARD 기반 평가 및 개발 툴입니다. controlCARD는 초기 평가 및 시스템 프로토타이핑에 이상적입니다. controlCARD는 두 가지 표준 폼 팩터(100핀 DIMM 또는 180핀 HSEC) 중 하나를 활용하여 프로파일이 낮은 단일 보드 컨트롤러 솔루션을 제공하는 완전한 보드 수준 모듈입니다. 첫 번째 평가의 경우 controlCARD는 일반적으로 베이스보드와 함께 번들로 구매하거나 (...)
SBAR010 — Delta Sigma Modulator Filter Calculator
지원되는 제품 및 하드웨어
제품
절연 ADC
정밀 ADC
하드웨어 개발
평가 보드
SBAR013 — Isolated Amplifier Voltage Sensing Excel Calculator
지원되는 제품 및 하드웨어
제품
절연 증폭기
절연 ADC
정밀 ADC
SBAR020 — Isolated Amplifier Current Sensing Excel Calculator
지원되는 제품 및 하드웨어
제품
절연 증폭기
절연 ADC
정밀 ADC
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOIC (DW) | 16 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.