ADS8688
- 16-Bit ADC with Integrated Analog Front-End
- 4-, 8-Channel MUX with Auto and Manual Scan
- Channel-Independent Programmable Input Ranges:
- Bipolar: ±10.24 V, ±5.12 V, and ±2.56 V
- Unipolar: 10.24 V, 5.12 V
- 5-V Analog Supply: 1.65-V to 5-V I/O Supply
- Constant Resistive Input Impedance: 1 MΩ
- Input Overvoltage Protection: Up to ±20 V
- On-Chip, 4.096-V Reference with Low Drift
- Excellent Performance:
- 500-kSPS Aggregate Throughput
- DNL: ±0.5 LSB; INL: ±0.75 LSB
- Low Drift for Gain Error and Offset
- SNR: 92 dB; THD: –102 dB
- Low Power: 65 mW
- AUX Input → Direct Connection to ADC Inputs
- SPI™-Compatible Interface with Daisy-Chain
- –40°C to 125°C Industrial Temperature Range
- TSSOP-38 Package (9.7 mm × 4.4 mm)
The ADS8684 and ADS8688 are 4- and 8-channel, integrated data acquisition systems based on a 16-bit successive approximation (SAR) analog-to-digital converter (ADC), operating at a throughput of 500 kSPS. The devices feature integrated analog front-end circuitry for each input channel with overvoltage protection up to ±20 V, a 4- or 8-channel multiplexer with automatic and manual scanning modes, and an on-chip, 4.096-V reference with low temperature drift. Operating on a single 5-V analog supply, each input channel on the devices can support true bipolar input ranges of ±10.24 V, ±5.12 V, and ±2.56 V, as well as unipolar input ranges of 0 V to 10.24 V and 0 V to 5.12 V. The gain of the analog front-end for all input ranges is accurately trimmed to ensure a high dc precision. The input range selection is software-programmable and independent for each channel. The devices offer a 1-MΩ constant resistive input impedance irrespective of the selected input range.
The ADS8684 and ADS8688 offer a simple SPI-compatible serial interface to the digital host and also support daisy-chaining of multiple devices. The digital supply operates from 1.65 V to 5.25 V, enabling direct interface to a wide range of host controllers.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS8688EVM-PDK — ADS8688 16비트, 500kSPS, 8채널, 단일 공급, SAR ADC EVM 성능 데모 키트(PDK)
평가 키트에는 ADS8688 평가 보드, 정밀 호스트 인터페이스(PHI) 컨트롤러 보드, 사용자가 USB(범용 직렬 버스)를 통해 ADC와 통신하고, 데이터를 캡처하고, 데이터 분석을 수행할 수 있는 관련 컴퓨터 소프트웨어가 포함되어 있습니다.
ADS8688SW-LINUX — ADS8688 Linux® 드라이버
The Linux driver supports the ADS868x 16-Bit, 500-kSPS, 4- and 8-Channel, Single-Supply, SAR ADCs with Bipolar Input Ranges. The Linux driver supports communication through the SPI bus and interfaces with the IIO sub-system.
Linux Mainline Status
Available in Linux Main line: Yes
Available through (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-00170 — 프로그래머블 로직 컨트롤러(PLC)용 16비트 아날로그 혼합 입력 및 출력 모듈 레퍼런스 디자인
The TIDA-00170 is a reference design for industrial control Analog Mixed Input Output Modules. The design implements four channel analog input & two channel analog output. The analog input channels can measure all standard industrial voltages up to ±10V and current inputs up to 24mA. The (...)
TIDA-00307 — 계량기 및 다기능 보호 릴레이용 아날로그 프론트 엔드(AFE) 레퍼런스 디자인
이 솔루션은 전류 및 전압용 측정 채널이 여러 개 필요한 병합 장치의 프런트엔드 요구 사항을 해결합니다. 모듈식으로 구현되어 있어 채널을 손쉽게 확장할 수 있을 뿐만 아니라, TI SAR ADC의 SPI 데이지 체인 기능을 사용하여 프로세서 연결을 최소한으로 유지합니다. 또한 이 솔루션은 각 채널에 대한 프론트 엔드 회로를 통합할 뿐만 아니라 온도 드리프트가 낮은 전압 레퍼런스를 통합하기 때문에 컴팩트합니다.
TIDA-00493 — SAR ADC의 mV 출력 센서 인터페이스를 위한 전압 및 전류(출력) 측정 AFE 레퍼런스 디자인
이 레퍼런스 디자인은 전력 측정 애플리케이션을 위한 SAR ADC를 사용하여 넓은 동적 범위에 걸쳐 낮은 진폭 전압 및 전류 입력을 정확하게 측정하는 고정 게인 증폭기 단계입니다. 전압 디바이더의 낮은 진폭 AC 전압, 전류 변압기 또는 분할 코어 전류 센서는 333mV 출력을 정확하게 측정할 수 있습니다.
TIDA-01214 — 16비트 ADC 및 디지털 아이솔레이터를 사용하는 절연, 고정밀 아날로그 입력 모듈 레퍼런스 디자인
TIDA-01555 — 여러 ADC를 사용하는 동시, 일관된 DAQ를 위한 유연한 인터페이스(PRU-ICSS) 레퍼런스 설계
TIDA-01576 — 16비트 1MSPS 듀얼 동시 샘플링 ADC를 지원하는 고정밀 아날로그 입력 모듈 레퍼런스 설계
TIDEP0033 — 신호 경로 지연 보상을 지원하는 SPI 마스터 레퍼런스 디자인
The Programmable Real-time Unit within the Industrial Communication Subsystem (PRU-ICSS) enables you to support real-time critical applications without using FPGAs, CPLDs or ASICs.
This reference design describes the implementation of the SPI master protocol with signal path delay compensation on (...)
TIPD166 — PLC용 16비트 8채널 ADC를 지원하는 단일 공급 아날로그 입력 모듈 레퍼런스 디자인
This design is for a 16-bit, 8-channel analog input module for industrial programmable logic controller (PLC) systems. The circuit is realized with an 8-channel, 16-bit, successive-approximation-register (SAR), analog-to-digital converter (ADC) with an integrated precision reference and analog (...)
TIPD167 — 전원 자동화를 위한 위상 보정 8채널 멀티플렉스 데이터 수집 시스템 레퍼런스 디자인
This TI Verified Design provides the theory, component selection, TINA-TI simulations, Verification & Measurement Performance, Altium Schematics, PCB Layout for a Phase Compensated 8-Ch Multiplexed Data Acquisition System for Power Automation. The design uses a 16-bit, 8-Channel, 500ksps SAR ADC, (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (DBT) | 38 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.