ADS8684
- 16-Bit ADC with Integrated Analog Front-End
- 4-, 8-Channel MUX with Auto and Manual Scan
- Channel-Independent Programmable Input Ranges:
- Bipolar: ±10.24 V, ±5.12 V, and ±2.56 V
- Unipolar: 10.24 V, 5.12 V
- 5-V Analog Supply: 1.65-V to 5-V I/O Supply
- Constant Resistive Input Impedance: 1 MΩ
- Input Overvoltage Protection: Up to ±20 V
- On-Chip, 4.096-V Reference with Low Drift
- Excellent Performance:
- 500-kSPS Aggregate Throughput
- DNL: ±0.5 LSB; INL: ±0.75 LSB
- Low Drift for Gain Error and Offset
- SNR: 92 dB; THD: –102 dB
- Low Power: 65 mW
- AUX Input → Direct Connection to ADC Inputs
- SPI™-Compatible Interface with Daisy-Chain
- –40°C to 125°C Industrial Temperature Range
- TSSOP-38 Package (9.7 mm × 4.4 mm)
The ADS8684 and ADS8688 are 4- and 8-channel, integrated data acquisition systems based on a 16-bit successive approximation (SAR) analog-to-digital converter (ADC), operating at a throughput of 500 kSPS. The devices feature integrated analog front-end circuitry for each input channel with overvoltage protection up to ±20 V, a 4- or 8-channel multiplexer with automatic and manual scanning modes, and an on-chip, 4.096-V reference with low temperature drift. Operating on a single 5-V analog supply, each input channel on the devices can support true bipolar input ranges of ±10.24 V, ±5.12 V, and ±2.56 V, as well as unipolar input ranges of 0 V to 10.24 V and 0 V to 5.12 V. The gain of the analog front-end for all input ranges is accurately trimmed to ensure a high dc precision. The input range selection is software-programmable and independent for each channel. The devices offer a 1-MΩ constant resistive input impedance irrespective of the selected input range.
The ADS8684 and ADS8688 offer a simple SPI-compatible serial interface to the digital host and also support daisy-chaining of multiple devices. The digital supply operates from 1.65 V to 5.25 V, enabling direct interface to a wide range of host controllers.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS8688EVM-PDK — ADS8688 16비트, 500kSPS, 8채널, 단일 공급, SAR ADC EVM 성능 데모 키트(PDK)
평가 키트에는 ADS8688 평가 보드, 정밀 호스트 인터페이스(PHI) 컨트롤러 보드, 사용자가 USB(범용 직렬 버스)를 통해 ADC와 통신하고, 데이터를 캡처하고, 데이터 분석을 수행할 수 있는 관련 컴퓨터 소프트웨어가 포함되어 있습니다.
ADS8688SW-LINUX — ADS8688 Linux® 드라이버
The Linux driver supports the ADS868x 16-Bit, 500-kSPS, 4- and 8-Channel, Single-Supply, SAR ADCs with Bipolar Input Ranges. The Linux driver supports communication through the SPI bus and interfaces with the IIO sub-system.
Linux Mainline Status
Available in Linux Main line: Yes
Available through (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-00310 — 스마트 그리드 IED용 아날로그 입력, 출력 및 릴레이 드라이브 출력 모듈 레퍼런스 디자인
이 레퍼런스 디자인은 전압(5V ~ 10V DC) 또는 전류(4-20mA)와 같은 아날로그 IO를 사용하는 그리드의 다른 디바이스와 통신해야 하는 보호 릴레이 및 RTU와 같은 스마트 그리드 디바이스를 위한 유연한 아날로그 IO 솔루션을 제공합니다. 이 솔루션은 유형의 IO와 전원 디지털 릴레이 드라이브를 지원합니다. 이 모듈에서는 프로세서 간 통신을 위해 SPI 및 I2C 통신 인터페이스를 사용할 수 있습니다.
TIPD167 — 전원 자동화를 위한 위상 보정 8채널 멀티플렉스 데이터 수집 시스템 레퍼런스 디자인
This TI Verified Design provides the theory, component selection, TINA-TI simulations, Verification & Measurement Performance, Altium Schematics, PCB Layout for a Phase Compensated 8-Ch Multiplexed Data Acquisition System for Power Automation. The design uses a 16-bit, 8-Channel, 500ksps SAR ADC, (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (DBT) | 38 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.