ADS7254
- 16-, 14-, and 12-Bit, Pin-Compatible Family
- Simultaneous Sampling of Two Channels
- Supports Fully-Differential Inputs
- High Speed:
- ADS8354: 16 Bits, 700 kSPS
- ADS7854: 14 Bits, 1 MSPS
- ADS7254: 12 Bits, 1 MSPS
- Excellent DC Performance:
- ADS8354:
- 16-Bit NMC DNL, ±2.5-LSB Max INL
- ADS7854:
- 14-Bit NMC DNL, ±1.5-LSB Max INL
- ADS7254:
- 12-Bit NMC DNL, ±1-LSB Max INL
- ADS8354:
- Excellent AC Performance:
- ADS8354:
- 93-dB SNR, –100-dB THD
- ADS7854:
- 88-dB SNR, –95-dB THD
- ADS7254:
- 72-dB SNR, –90-dB THD
- ADS8354:
- Dual, Programmable, and Buffered
2.5-V Internal Reference - Fully-Specified Over the Extended Industrial Temperature Range: –40°C to 125°C
- Small Footprint:
WQFN-16 (3-mm × 3-mm) and TSSOP-16
The ADS8354, ADS7854, and ADS7254 belong to a family of pin-compatible, dual, high-speed, simultaneous-sampling, analog-to-digital converters (ADCs) that support fully-differential analog inputs.
Each device includes two individually programmable reference sources that can be used for system-level gain calibration. Also, a flexible serial interface that can operate over a wide power-supply range enables easy communication with a large variety of host controllers. Power consumption for a given throughput can be optimized by using the two low-power modes supported by the device. All devices are fully specified over the extended industrial temperature range (–40°C to 125°C) and are available in pin-compatible, WQFN-16 (3-mm × 3-mm) and TSSOP-16 packages.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | ADSxx54 Dual, High-Speed, 16-, 14-, and 12-Bit, Simultaneous-Sampling, Analog-to-Digital Converters datasheet (Rev. B) | PDF | HTML | 2014. 8. 12 | |
| Application brief | Precision ADCs in Servo Drives (Rev. A) | PDF | HTML | 2025. 10. 29 | ||
| Product overview | Precision ADCs for Motor Encoders and Position Sensing (Rev. A) | PDF | HTML | 2025. 10. 28 | ||
| e북 | Best of Baker's Best: Precision Data Converters -- SAR ADCs | 2015. 5. 21 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
SBAC128 — ADSxx53EVM-PDK and ADSxx54EVM-PDK Software
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-00201 — 플럭스 게이트 센서를 사용한 전류 및 전압 측정을 위한 차동 신호 조절 회로
This design provides a 4-channel signal conditioning solution for differential ADCs integrated into a microcontroller measuring motor current using fluxgate sensors. Also provided is an alternative measurement circuit with external differential SAR ADCs as well as circuits for high-speed (...)
TIDA-00202 — HIPERFACE 위치 인코더 인터페이스 레퍼런스 디자인
TIDA-00202 레퍼런스 설계는 HIPERFACE 위치 인코더에 대한 EMC 규격 준수 산업용 하이브리드 아날로그 및 디지털 인터페이스입니다. IEC-ESD 및 IEC-EFT 보호를 지원하는 3.3V 전원 RS485 트랜시버는 양방향 매개 변수 채널에 사용됩니다. 아날로그 sin/cos 신호 채널의 경우 두 가지 옵션이 제공되므로 두 가지 옵션을 동시에 사용하여 임베디드 ADC 또는 이중화 유무에 관계없이 프로세서에 자유롭게 연결할 수 있습니다. 첫 번째 옵션은 SPI 출력을 지원하는 완전 차동 이중 12비트 ADC가 (...)
TIDA-00499 — 차동 증폭기 및 HS ADC를 사용하는 과도현상 및 디지털 고장 레코더 AFE 레퍼런스 디자인
DFR(디지털 고장 레코더)는 60/50Hz에서 17/20μs의 과도현상을 감지할 수 있지만, 과도 현상 레코더는 마이크로초 이내에 정점을 찍고 사라지는 교란을 포착합니다. 이 레퍼런스 디자인은 DFR의 경우 최대 1MHz, 과도현상 테코더의 경우 25MHz에서 과도 입력을 캡처하는 방법을 보여줍니다. 고속 컨버터를 구동하는 차동 증폭기를 사용하여 애플리케이션 요구 사항(12비트~14비트 해상도)에 따라 다양한 해상도로 양극 및 음극 과도 상태(<=2kV 피크)를 캡처할 수 있습니다.
TIPD117 — 광학 인코더용 듀얼 채널 데이터 수집 시스템, 12비트, 1MSPS
This TI Precision Verified Design provides the theory, component selection, simulation, PCB design, and measurement details for a 12-bit 1-MSPS single supply dual channel simultaneous data acquisition system. This circuit achieves 73 dB SINAD for a 4.5 V differential signal at 2 KHz input (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
| TSSOP (PW) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.