ADS127L21B
- AC performance with dc precision:
- Dynamic range (200kSPS): 111.5dB (typical)
- INL: 0.2ppm of FSR (typical)
- THD: –125dB (typical)
- Offset drift: 50nV/°C (typical)
- Gain drift: 0.5ppm/°C (typical)
- Power-scalable speed modes:
- Max speed: 512kSPS (33mW typical)
- High speed: 400kSPS (26mW typical)
- Mid speed: 200kSPS (14mW typical)
- Low speed: 50kSPS (4.3mW typical)
- Wideband or low-latency filter modes
- Programmable data rates:
- Wideband filter mode: 512kSPS
- Low-latency filter mode: 1.365MSPS
- Programmable IIR and FIR digital filters
- Buffered inputs
- 1.5µA input current typical, mid-speed mode
- Input range: ±VREF or ±2VREF
- Internal or external clock operation
- Conversion latency (low-latency filter): 3µs
- Functional Safety-Capable
The ADS127L21B is a high-precision, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) featuring programmable digital filters. This digital filter has data rates up to 512kSPS using the wideband filter and up to 1365kSPS using the low-latency filter. The device offers an excellent combination of ac performance and dc precision with low power consumption.
The low-drift modulator achieves excellent dc precision with maximum 0.8ppm INL (0°C to 70°C) and outstanding ac performance with low wideband noise. The power-scalable architecture features four speed modes to optimize data rate, resolution, and power consumption. Signal and reference input buffers reduce driver loading for increased accuracy.
Programmable infinite and finite impulse response (IIR and FIR) digital filters allow custom filter profiles, such as A-weighting compensation and frequency notch filters. The wideband or low-latency filter option optimize ac-signal performance or data throughput of dc signals, all in one device.
The serial interface features daisy-chain capability to reduce the number of signal lines over an isolation barrier. SPI input data and register memory contents are validated by cyclic-redundancy check (CRC) to enhance operational reliability.
The small 3mm × 3mm WQFN package is designed for space-limited applications. The device is fully specified for operation over the –40°C to +125°C temperature range and is pin-to-pin compatible to the ADS127L21.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | ADS127L21B 512kSPS, High-Precision, 24-Bit, Wideband Delta-Sigma ADC datasheet | PDF | HTML | 2024. 10. 16 | |
| 애플리케이션 노트 | Design Considerations for Multiple Wide Bandwidth Delta- Sigma ADCs in Simultaneous-Sampling Systems (Rev. A) | PDF | HTML | 2025. 12. 29 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS127L21EVM-PDK — 간편한 드라이브 입력 및 광대역 또는 저지연 필터를 갖춘 ADC용 ADS127L21 평가 모듈
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
TIDA-010970 — 저잡음, 높은 선형 디지털 멀티미터 및 데이터 수집 신호 체인 레퍼런스 설계
이 설계의 대상 애플리케이션에는 DC 신호를 초고정밀도로 측정해야 하는 DMM(디지털 멀티미터)이 포함됩니다. 이 설계는 높은 유효 선형성을 갖춘 고성능 24비트 ADC(아날로그-디지털 컨버터)인 ADS127L21B를 사용하여 우수한 DC 정확도를 달성합니다. 초저 드리프트 매립형 제너 레퍼런스인 REF81이 게인 및 오프셋 오류를 제거하기 위해 신호 체인을 보정합니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RUK) | 20 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.