ADS1271
- 105kSPS Data Rate
- AC Performance:
51kHz Bandwidth
109dB SNR (High-Resolution Mode)
108dB THD - DC Accuracy:
1.8µV/°C Offset Drift
2ppm/°C Gain Drift - Selectable Operating Modes:
High-Speed: 105kSPS Data Rate
High-Resolution: 109dB SNR
Low-Power: 35mW Dissipation - Power-Down Control
- Digital Filter:
Linear Phase Response
Passband Ripple: ±0.005dB
Stop Band Attenuation: 100dB - Internal Offset Calibration On Command
- Selectable SPI&™ or Frame Sync Serial Interface
- Designed for Multichannel Systems:
Daisy-Chainable Serial Interface
Easy Synchronization - Simple Pin-Driven Control
- Modulator Output Option
- Specified from 40°C to +105°C
- Analog Supply: 5V
- Digital Supply: 1.8V to 3.3V
- APPLICATIONS
- Vibration/Modal Analysis
- Acoustics
- Dynamic Strain Gauges
- Pressure Sensors
- Test and Measurement
SPI is a trademark of Motorola Inc. All other trademarks are the property of their respective owners.
The ADS1271 is a 24-bit, delta-sigma analog-to-digital converter (ADC) with a data rate up to 105kSPS. It offers a unique combination of excellent DC accuracy and outstanding AC performance. The high-order, chopper-stabilized modulator achieves very low drift with low in-band noise. The onboard decimation filter suppresses modulator and signal out-of-band noise. The ADS1271 provides a usable signal bandwidth up to 90% of the Nyquist rate with less than 0.005dB of ripple.
Traditionally, industrial delta-sigma ADCs offering good drift performance use digital filters with large passband droop. As a result, they have limited signal bandwidth and are mostly suited for DC measurements. High-resolution ADCs in audio applications offer larger usable bandwidths, but the offset and drift specification are significantly weaker than their industrial counterparts. The ADS1271 combines these converters, allowing high-precision industrial measurement with excellent DC and AC specifications ensured over an extended industrial temperature range.
Three operating modes allow for optimization of speed, resolution, and power. A selectable SPI or a frame-sync serial interface provides for convenient interfacing to microcontrollers or DSPs. The output from the modulator is accessible for external digital filter applications. All operations, including internal offset calibration, are controlled directly by pins; there are no registers to program.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | 24-Bit, Wide Bandwidth Analog-to-Digital Converter datasheet (Rev. F) | 2007. 10. 23 | |||
| 애플리케이션 노트 | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023. 3. 29 | |||
| e북 | Fundamentals of Precision ADC Noise Analysis (Rev. A) | 2020. 6. 19 | ||||
| 백서 | Voltage-reference impact on total harmonic distortion | 2016. 8. 1 | ||||
| e북 | Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs | 2015. 3. 19 | ||||
| 애플리케이션 노트 | Synchronizing the ADS1271 | 2005. 10. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PP-SALB2-EVM — PP-SALB2-EVM 스마트 증폭기 스피커 특성화 보드 평가 모듈(학습 보드 2)
이 보드는 다음을 지원합니다. TAS2555YZEVM, TAS2557EVM 및 TAS2559EVM.
스마트 증폭기 스피커 특성화 보드는 지원되는 TI 스마트 증폭기 및 PurePath 콘솔 소프트웨어와 함께 사용될 경우 사용자가 TI 스마트 증폭기 제품과 함께 사용할 스피커 진동 편위, 온도 및 기타 매개 변수를 측정할 수 있는 기능을 제공합니다. 전체 솔루션은 사용하기 쉬운 단계별 프로세스를 제공하여 전체 스피커 특성화 프로세스를 안내합니다. 특성화가 완료되면 스피커 매개 변수가 PurePath 콘솔에 자동으로 로드되므로 (...)
ADS1271-EXCEL-CALC-TOOL — ADS1271 Design Calculator
- ADS1271 Excel 계산기 툴은 ADS1271의 구성을 간소화하는 몇 가지 편리한 툴을 제공합니다. 이 툴을 사용하면 사용자가 ADS1271 광대역 아날로그-디지털 컨버터(ADC)로 설계를 최적화하는 데 도움이 되는 다양한 설정 및 작동 모드를 이해할 수 있습니다. 이 툴에는 ADC 변환 계산기, 디지털 필터 응답 계산기, 데이지 체인 구성 탭 및 SNR 예측기가 포함되어 있습니다. ADS1271 계산기는 공통 프로그래밍 및 장치 설정 장애물을 제거하여 시장 출시 시간을 단축합니다.
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
ADC-DAC-TO-VREF-SELECT-DESIGN-TOOL — The ADC-TO-VREF-SELECT tool enables the pairing of TI ADCs, DACs, and series voltage references.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| TSSOP (PW) | 16 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.