ADS1018-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- Functional Safety-Capable
- 12-bit noise-free resolution
- Wide supply range: 2 V to 5.5 V
- Low current consumption:
- Continuous mode: only 150 µA
- Single-shot mode: automatic power-down
- Programmable data rate: 128 SPS to 3300 SPS
- Single-cycle settling
- Internal low-drift voltage reference
- Internal temperature sensor:
2°C (maximum) error - Internal oscillator
- Internal PGA
- Four single-ended or two differential inputs
The ADS1018-Q1 is a precision, low power, 12-bit, noise-free, analog-to-digital converter
(ADC) that provides all features necessary to measure the most common sensor signals. The
ADS1018-Q1 integrates a programmable gain amplifier (PGA), voltage reference, oscillator, and
high-accuracy temperature sensor. These features, along with a wide power-supply range from 2 V to
5.5 V, make the
ADS1018-Q1 ideally suited for power- and space-constrained, sensor-measurement applications.
The ADS1018-Q1 performs conversions at data rates up to 3300 samples per second (SPS). The PGA offers input ranges from ±256 mV to ±6.144 V, allowing both large and small signals to be measured with high resolution. An input multiplexer (mux) allows measurement of two differential or four single-ended inputs. The high-accuracy temperature sensor is used for system-level temperature monitoring, or cold-junction compensation for thermocouples.
The ADS1018-Q1 operates either in continuous-conversion mode, or in a single-shot mode that automatically powers down after a conversion. Single-shot mode significantly reduces current consumption during idle periods. Data are transferred through a serial peripheral interface (SPI™). The ADS1018-Q1 is specified from –40°C to +125°C.
관심 가지실만한 유사 제품
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | ADS1018-Q1 Automotive, Low-Power, SPI™-Compatible, 12-Bit, Analog-to-Digital Converter With Internal Reference and Temperature Sensor datasheet (Rev. B) | PDF | HTML | 2020. 4. 30 | |
| Circuit design | Precision measurement circuit with 8 different channels and SPI (Rev. A) | PDF | HTML | 2024. 9. 19 | ||
| 애플리케이션 노트 | Calculating Conversion Latency and System Cycle Time for Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2024. 3. 18 | ||
| 애플리케이션 노트 | Digital Filter Types in Delta-Sigma ADCs (Rev. A) | PDF | HTML | 2023. 3. 29 | ||
| e북 | Fundamentals of Precision ADC Noise Analysis (Rev. A) | 2020. 6. 19 | |||
| 기능 안전 정보 | ADS1018-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA | 2020. 3. 11 | |||
| 아날로그 디자인 학술지 | How delta-sigma ADCs work, Part 1 (Rev. A) | 2016. 9. 19 | |||
| 아날로그 디자인 학술지 | How delta-sigma ADCs work, Part 2 | 2011. 11. 9 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS1018EVM — ADS1018 12비트, 3.3kSPS, 4채널, 델타-시그마 ADC 평가 모듈(EVM)
ADS1018 평가 모듈(EVM)은 초소형, 저전력, 12비트, 정밀 아날로그-디지털 컨버터(ADC)인 ADS1018 제품을 평가하기 위한 완벽한 솔루션입니다. USB 연결 및 간단한 소프트웨어 인터페이스를 통해 전원 및 I/O가 제공됩니다. 아날로그 입력은 터미널 블록에 연결하여 2개의 차동 입력 또는 4개의 단일 종단 입력 중 하나를 제공할 수 있습니다.
ADS1118-C-EXAMPLE-CODE — ADS1118 example C code
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
아날로그 엔지니어의 계산기는 아날로그 회로 설계 엔지니어가 정기적으로 사용하는 많은 반복 계산의 속도를 높이도록 설계되었습니다. 이 PC 기반 툴은 피드백 저항을 사용한 연산 증폭기 게인 설정부터 아날로그-디지털 컨버터(ADC) 드라이브 버퍼 회로 안정화를 위한 적절한 회로 설계 요소 선택에 이르기까지 다양한 일반적인 계산 목록이 포함된 그래픽 인터페이스를 제공합니다.
이 계산기는 독립 실행형 툴로 유용할 뿐만 아니라 아날로그 엔지니어의 포켓 레퍼런스에 설명된 개념과도 잘 어울립니다.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSSOP (DGS) | 10 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.