ADC09QJ1300-Q1
- AEC-Q100 qualified for automotive applications:
- Temperature grade 1: –40°C to +125°C, TA
- ADC Core:
- Resolution: 9 Bit
- Maximum sampling rate: 1.3GSPS
- Non-interleaved architecture
- Internal dither reduces high-order harmonics
- Performance specifications (–1dBFS):
- SNR (100MHz): 53.5dBFS
- ENOB (100MHz): 8.5Bits
- SFDR (100MHz): 64dBc
- Noise floor (–20dBFS): –143dBFS
- Full-scale input voltage: 800mVPP-DIFF
- Full-power input bandwidth: 6GHz
- JESD204C Serial data interface:
- Support for 2 to 8 (Quad/Dual channel) or 1 to 4 (Single channel) total SerDes lanes
- Maximum baud-rate: 17.16Gbps
- 64B/66B and 8B/10B encoding modes
- Subclass-1 support for deterministic latency
- Compatible with JESD204B receivers
- Optional internal sampling clock generation
- Internal PLL and VCO (7.2–8.2GHz)
- SYSREF Windowing eases synchronization
- Four clock outputs simplify system clocking
- Reference clocks for FPGA or adjacent ADC
- Reference clock for SerDes transceivers
- Timestamp input and output for pulsed systems
- Power consumption (1GSPS):
- Quad Channel: 450mW / channel
- Dual channel: 625mW / channel
- Single channel: 940mW
- Power supplies: 1.1V, 1.9V
ADC09xJ1300-Q1 is a family of quad, dual and single channel, 9-bit, 1.3 GSPS analog-to-digital converters (ADC). Low power consumption, high sampling rate and 9-bit resolution makes the ADC09xJ1300-Q1 ideally suited for light detection and ranging (LiDAR) systems. ADC09xJ1300-Q1 is qualified for automotive applications.
Full-power input bandwidth (-3dB) of 6GHz provides flat frequency response for frequency modulated continuous wave (FMCW) LiDAR systems and provides a narrow impulse response for pulse-based systems. The full-power input bandwidth also enables direct RF sampling of up to 4GHz.
A number of clocking features are included to relax system hardware requirements, such as an internal phase-locked loop (PLL) with integrated voltage-controlled oscillator (VCO) to generate the sampling clock. Four clock outputs are provided to clock the logic and SerDes of the FPGA or ASIC. A timestamp input and output is provided for pulsed systems.
JESD204C serialized interface decreases system size by reducing the amount of printed circuit board (PCB) routing. Interface modes support from 2 to 8 lanes (dual and quad channel devices) or 1 to 4 lanes (for the single channel device), with SerDes baud-rates up to 17.16Gbps, to allow the optimal configuration for each application.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | ADC09xJ1300-Q1 Quad, Dual, Single Channel, 1.3GSPS, 9-bit Analog-to-Digital Converter (ADC) with JESD204C Interface datasheet (Rev. B) | PDF | HTML | 2024. 10. 22 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADC09QJ1300EVM — ADC09QJ1300 - JESD204C 인터페이스를 지원하는 쿼드 채널, 9비트, 1.3GSPS ADC용 평가 모듈
TSW12QJ1600EVM — ADC12QJ1600-Q1 8채널(2개의 동기화된 4채널) 12비트 1.6GSPS JESD204C 인터페이스 ADC 평가 모듈
TI204C-IP — Request for JESD204 rapid design IP
JESD204 고속 설계 IP는 FPGA 엔지니어가 JESD204 시스템으로 작동하는 경로를 가속화할 수 있도록 설계 IP는 다운스트림 디지털 처리 및 기타 애플리케이션 로직이 JESD204 프로토콜 대부분의 성능 및 타이밍에 중요한 제약 조건으로부터 격리되는 방식으로 설계되었습니다. IP는 설계자가 펌웨어 개발 시간을 단축하고 FPGA 통합을 쉽게 수행할 수 있도록 지원합니다.
JESD204 고속 설계 IP는 TI 고속 데이터 컨버터와 함께 사용할 수 있도록 로열티 없이 제공됩니다. TI는 특정 FPGA 플랫폼과 TI 데이터 (...)
DATACONVERTERPRO-SW — 고속 데이터 컨버터 프로 GUI 설치 프로그램, v5.31
이 고속 데이터 컨버터 프로 GUI는 대부분의 TI 고속 데이터 컨버터 [ADC(아날로그-디지털 컨버터) 및 DAC(디지털-아날로그 컨버터)] 및 AFE(아날로그 프론트 엔드) 플랫폼을 평가할 수 있도록 설계된 PC(Windows® XP/7/10 호환) 프로그램입니다. 전체 TSW14xxx 시리즈의 데이터 캡처 및 패턴 생성 카드를 지원하도록 설계된 DATACONVERTERPRO-SW는 시간 및 주파수 영역 모두에서 데이터 컨버터를 분석할 수 있는 강력하고 빠른 솔루션과 단일 톤, 멀티톤 및 변조 신호 지원을 제공합니다. 또한 이 (...)
ADC09xJ800, ADC09xJ1300, ADC12xJ800 and ADC12xJ1600 IBIS-AMI Model (Rev. A)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| FCCSP (AAV) | 144 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.