The UCC28742 off-line flyback controller is a highly integrated, 6-pin secondary-side
regulated PWM controller for efficient AC-to-DC power supplies. It is an isolated-flyback
power-supply controller that provides Constant-Voltage (CV) using an optical coupler to improve
transient response to large-load steps. This device processes information from opto-coupled
feedback and an auxiliary flyback winding for high-performance control of output voltage and
current.
The UCC28742 employs advanced control algorithms to achieve high operating efficiency and
performance. The drive output interfaces to a MOSFET power switch. Discontinuous conduction mode
(DCM) with valley-switching reduces switching losses. Modulation of switching frequency and primary
current-peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and
line ranges.
The controller has a maximum switching frequency of 80 kHz and always maintains control
of the peak-primary current in the transformer. A minimum switching frequency of 200 Hz facilitates
the achievement of low no-load input power.
The UCC28742 off-line flyback controller is a highly integrated, 6-pin secondary-side
regulated PWM controller for efficient AC-to-DC power supplies. It is an isolated-flyback
power-supply controller that provides Constant-Voltage (CV) using an optical coupler to improve
transient response to large-load steps. This device processes information from opto-coupled
feedback and an auxiliary flyback winding for high-performance control of output voltage and
current.
The UCC28742 employs advanced control algorithms to achieve high operating efficiency and
performance. The drive output interfaces to a MOSFET power switch. Discontinuous conduction mode
(DCM) with valley-switching reduces switching losses. Modulation of switching frequency and primary
current-peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and
line ranges.
The controller has a maximum switching frequency of 80 kHz and always maintains control
of the peak-primary current in the transformer. A minimum switching frequency of 200 Hz facilitates
the achievement of low no-load input power.