TXS0102

AKTIV

Bidirektionaler Spannungspegelumsetzer, 2 Bit, für Open-Drain- und Push-Pull-Anwendung

Jetzt bestellen

Datenblatt

document-pdfAcrobat TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications datasheet (Rev. L) (Englisch) PDF | HTML

TXS0102

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Bits (#)

2

Data rate (max) (Mbps)

24

Topology

Open drain, Push-Pull

Direction control (typ)

Auto-direction

Vin (min) (V)

1.65

Vin (max) (V)

3.6

Vout (min) (V)

2.3

Vout (max) (V)

5.5

Applications

GPIO, I2C, MDIO, SDIO, SMBus, UART

Features

Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation

Prop delay (ns)

4.4

Technology family

TXS

Supply current (max) (mA)

0.025

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Bits (#)

2

Data rate (max) (Mbps)

24

Topology

Open drain, Push-Pull

Direction control (typ)

Auto-direction

Vin (min) (V)

1.65

Vin (max) (V)

3.6

Vout (min) (V)

2.3

Vout (max) (V)

5.5

Applications

GPIO, I2C, MDIO, SDIO, SMBus, UART

Features

Edge rate accelerator, Output enable, Partial power down (Ioff), Vcc isolation

Prop delay (ns)

4.4

Technology family

TXS

Supply current (max) (mA)

0.025

Rating

Catalog

Operating temperature range (°C)

-40 to 85

DSBGA (YZP)

8

2.8125 mm² 2.25 x 1.25

SSOP (DCT)

8

11.8 mm² 2.95 x 4

VSSOP (DCU)

8

6.2 mm² 2 x 3.1

X1QFN (DTT)

8

1.95 mm² 1.95 x 1

X2SON (DQE)

8

1.4 mm² 1.4 x 1

X2SON (DQM)

8

2.16 mm² 1.8 x 1.2

No direction-control signal needed
Maximum data rates:
- 24Mbps (push pull)
- 2Mbps (open drain)
Available in the Texas Instruments NanoStar™ integrated circuit package
1.65V to 3.6V on A port and 2.3V to 5.5V on B port (VCCA ≤ VCCB)
VCC isolation feature: if either VCC input is at GND, both ports are in the High-Impedance state
No power-supply sequencing required: either VCCA or VCCB can be ramped first
Ioff supports partial-power-down mode operation
Latch-up performance exceeds 100mA per JESD 78, Class II
ESD protection exceeds JESD 22:
- A port:
  - 2500V Human-Body Model (A114-B)
  - 250V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)
- B port:
  - 8kV Human-Body Model (A114-B)
  - 250V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)

No direction-control signal needed
Maximum data rates:
- 24Mbps (push pull)
- 2Mbps (open drain)
Available in the Texas Instruments NanoStar™ integrated circuit package
1.65V to 3.6V on A port and 2.3V to 5.5V on B port (VCCA ≤ VCCB)
VCC isolation feature: if either VCC input is at GND, both ports are in the High-Impedance state
No power-supply sequencing required: either VCCA or VCCB can be ramped first
Ioff supports partial-power-down mode operation
Latch-up performance exceeds 100mA per JESD 78, Class II
ESD protection exceeds JESD 22:
- A port:
  - 2500V Human-Body Model (A114-B)
  - 250V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)
- B port:
  - 8kV Human-Body Model (A114-B)
  - 250V Machine Model (A115-A)
  - 1500V Charged-Device Model (C101)

This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3V to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.

To put the device in the high-impedance state during power up or power down, tie OE to GND through a pulldown resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.

This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 3.6V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3V to 5.5V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8V, 2.5V, 3.3V, and 5V voltage nodes.

When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption.

To put the device in the high-impedance state during power up or power down, tie OE to GND through a pulldown resistor; the current-sourcing capability of the driver determines the minimum value of the resistor.

filter

Andere Spannungsumsetzer suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 19

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Data sheet	TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications datasheet (Rev. L)	PDF \| HTML	16 Jan 2026
	Application note	Schematic Checklist - A Guide to Designing with Auto-Bidirectional Translators	PDF \| HTML	12 Jul 2024
	Application note	Understanding Transient Drive Strength vs. DC Drive Strength in Level-Shifters (Rev. A)	PDF \| HTML	03 Jul 2024
	Application brief	Integrated vs. Discrete Open Drain Level Translation	PDF \| HTML	09 Jan 2024
	Application note	Leveraging Edge Rate Accelerators with Auto-Sensing Level Shifters	PDF \| HTML	29 Sep 2023
	Application brief	Future-Proofing Your Level Shifter Design with TI's Dual Footprint Packages	PDF \| HTML	05 Sep 2023
	Application note	Do’s and Don’ts for TXB and TXS Voltage Level-Shifters with Edge Rate Accelerato	PDF \| HTML	28 Jun 2023
	Product overview	Enabling System on Module Industrial PC Connectivity With Level Translation	PDF \| HTML	03 Apr 2023
	Application brief	Enabling Next Generation Processors, FPGA, and ASSP with Voltage Level Translat	PDF \| HTML	17 Jan 2023
	Application brief	Enabling Smart Solar Inverter Designs with Level Translation	PDF \| HTML	31 Okt 2022
	Product overview	Translate Voltages for I2C for PCA9306 LSF0102 TXS0102	PDF \| HTML	14 Sep 2022
	Product overview	Translate Voltages for I2C	PDF \| HTML	02 Jun 2022
	Application brief	Translate Voltages for MDIO	PDF \| HTML	16 Jul 2021
	Selection guide	Voltage Translation Buying Guide (Rev. A)		15 Apr 2021
	Technical article	How smart thermostats get their degrees	PDF \| HTML	09 Mär 2020
	Application note	Effects of pullup and pulldown resistors on TXS and TXB devices (Rev. A)		28 Mär 2018
	Application note	Factors Affecting VOL for TXS and LSF Auto-bidirectional Translation Devices		19 Nov 2017
	Application note	Biasing Requirements for TXS, TXB, and LSF Auto-Bidirectional Translators		30 Okt 2017
	Application note	A Guide to Voltage Translation With TXS-Type Translators		29 Jun 2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

5-8-LOGIC-EVM — Generisches Logik-Evaluierungsmodul für 5- bis 8-polige DCK-, DCT-, DCU-, DRL- und DBV-Gehäuse

Flexibles EVM zur Unterstützung aller Geräte mit 5- bis 8-poligem DCK-, DCT-, DCU-, DRL- oder DBV-Gehäuse.

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Evaluierungsplatine

TXS-EVM — Evaluierungsmodul der Konverterfamilie für Bausteine mit ein, zwei, vier und acht Kanälen

Das TXS-EVM ist für die Unterstützung von TXS-Bausteinen mit einem, zwei, vier und acht Kanälen konzipiert. Die TXS-Bausteine gehören zur Familie der autobidirektionalen Spannungspegelumsetzer mit einer Betriebsspannung zwischen 1,2 V und 5,5 V, die verschiedene allgemeine Anwendungen zur (...)

Benutzerhandbuch: PDF | HTML

Nicht verfügbar auf TI.com

Viele TI-Referenzdesigns beinhalten TXS0102

Mit unserem Referenzdesign-Auswahltool können Sie die für Ihre Anwendung und Ihre Parameter am besten geeigneten Designs durchsehen und ermitteln.

Referenzdesigns anzeigen

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
DSBGA (YZP)	8	Ultra Librarian
SSOP (DCT)	8	Ultra Librarian
VSSOP (DCU)	8	Ultra Librarian
X1QFN (DTT)	8	Ultra Librarian
X2SON (DQE)	8	Ultra Librarian
X2SON (DQM)	8	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TXS0102

Bidirektionaler Spannungspegelumsetzer, 2 Bit, für Open-Drain- und Push-Pull-Anwendung

TXS0102

Produktdetails

Technische Dokumentation

Design und Entwicklung

5-8-LOGIC-EVM — Generisches Logik-Evaluierungsmodul für 5- bis 8-polige DCK-, DCT-, DCU-, DRL- und DBV-Gehäuse

TXS-EVM — Evaluierungsmodul der Konverterfamilie für Bausteine mit ein, zwei, vier und acht Kanälen

Viele TI-Referenzdesigns beinhalten TXS0102

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos