TUSB9261

AKTIV

USB-3.0 5-Gbit/s-zu-SATA-Brücke

Jetzt bestellen

Datenblatt

document-pdfAcrobat TUSB9261 USB 3.0 to SATA Bridge datasheet (Rev. I) (Englisch) PDF | HTML

TUSB9261

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Type

Bridge

Function

USB3

USB speed (bps)

5000000000

Alternate mode

No

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Type

Bridge

Function

USB3

USB speed (bps)

5000000000

Alternate mode

No

Rating

Catalog

Operating temperature range (°C)

-40 to 85

HTQFP (PVP)

64

81 mm² (9 mm × 9 mm)

Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant – TID
  340730020
  - Integrated Transceiver Supports SS/HS/FS
    Signaling
- Best-in-Class Adaptive Equalizer
  - Allows for Greater Jitter Tolerance in the
    Receiver
- USB Class Support
  - USB Attached SCSI Protocol (UASP)
  - USB Mass Storage Class Bulk-Only
    Transport (BOT)
  - Support for Error Conditions Per the 13
    Cases (Defined in the BOT Specification)
  - USB Bootability Support
  - USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a
  TI Provided Application
SATA Interface
- Serial ATA Specification Revision 2.6
  - Gen1i, Gen1m, Gen2i, and Gen2m
- Support for Mass-Storage Devices Compatible
  With the ATA/ATAPI-8 Specification
Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded from
  EEPROM by SPI Interface
- Two Additional SPI Port Chip Selects for
  Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
  - Two GPIOs have PWM Functionality for
    LED Blink Speed Control
- Serial Communications Interface for Debug
  (UART)
General Features
- Integrated Spread Spectrum Clock Generation
  Enables Operation from a Single Low-Cost
  Crystal or Clock Oscillator
  - Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and
  IEEE1149.6 Boundary Scan
- Available in a Fully RoHS-Compliant Package

Universal Serial Bus (USB)
- SuperSpeed USB 3.0 Compliant – TID
  340730020
  - Integrated Transceiver Supports SS/HS/FS
    Signaling
- Best-in-Class Adaptive Equalizer
  - Allows for Greater Jitter Tolerance in the
    Receiver
- USB Class Support
  - USB Attached SCSI Protocol (UASP)
  - USB Mass Storage Class Bulk-Only
    Transport (BOT)
  - Support for Error Conditions Per the 13
    Cases (Defined in the BOT Specification)
  - USB Bootability Support
  - USB Human Interface Device (HID)
- Supports Firmware Update Via USB, Using a
  TI Provided Application
SATA Interface
- Serial ATA Specification Revision 2.6
  - Gen1i, Gen1m, Gen2i, and Gen2m
- Support for Mass-Storage Devices Compatible
  With the ATA/ATAPI-8 Specification
Integrated ARM Cortex M3 Core
- Customizable Application Code Loaded from
  EEPROM by SPI Interface
- Two Additional SPI Port Chip Selects for
  Peripheral Connection
- Up to 12 GPIOs for End-User Configuration
  - Two GPIOs have PWM Functionality for
    LED Blink Speed Control
- Serial Communications Interface for Debug
  (UART)
General Features
- Integrated Spread Spectrum Clock Generation
  Enables Operation from a Single Low-Cost
  Crystal or Clock Oscillator
  - Supports 40 MHz
- A JTAG Interface is Used for IEEE1149.1 and
  IEEE1149.6 Boundary Scan
- Available in a Fully RoHS-Compliant Package

The TUSB9261 is an ARM^® Cortex^® M3 microcontroller based USB 3.0 to serial ATA bridge. It provides the necessary hardware and firmware to implement a USB attached SCSI protocol (UASP)-compliant mass storage device suitable for bridging hard disk drives (HDD), solid state disk drives (SSD), optical drives, and other compatible SATA 1.5-Gbps or SATA 3.0-Gbps devices to a USB 3.0 bus. In addition to UASP support, the firmware implements the mass storage class BOT and USB HID interfaces.

filter

Andere USB-PHYs und Brücken suchen

Herunterladen Video mit Transkript ansehen Video

Weitere Informationen anfordern

TUSB9261-Quellcode jetzt verfügbar. Jetzt anfordern

Technische Dokumentation

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 7

Top-Dokumentation	Typ	Titel	Format-Optionen	Datum
*	Datenblatt	TUSB9261 USB 3.0 to SATA Bridge datasheet (Rev. I)	PDF \| HTML	03.03.2016
*	Errata	TUSB9261 Errata (Rev. B)		20.12.2012
	Technischer Artikel	6 key questions when designing for USB protocol interfaces	PDF \| HTML	31.07.2020
	Anwendungshinweis	TUSB9261 Implementation Guide (Rev. E)		09.12.2014
	Benutzerhandbuch	TUSB9261 DEMO User's Guide (Rev. A)		09.12.2014
	Benutzerhandbuch	TUSB9260 Flash Burner - User Guide (Rev. D)		24.10.2013
	Benutzerhandbuch	TUSB926x SpeedBoost Monitor User's Guide		23.09.2010

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TUSB9261DEMO — TUSB9261 Demo- und Referenzdesign

The TUSB9261DEMO board is a bridge between a SuperSpeed USB (USB 3.0) bus and a Serial–ATA (SATA) development kit. The TUSB9261DEMO is used to evaluate system compatibility. It provides a TUSB9261 hardware for connection to a SATA device such as a solid state drive, hard disk drive, DVD (...)